[U-Boot-Users] copy to flash ... outside available flash
Thomas Ruschival
ruschi79 at gmx.net
Tue Nov 14 11:48:00 CET 2006
Here are the commands I loaded the image with:
now I got a different error. It claim the flash wasn't erased?
1.) load image
loadb 100000
// here I am sending the image
## Total Size = 0x0018cfc9 = 1626057 Bytes
## Start Addr = 0x00100000
2.) Verify The Image
=> imi
## Checking Image at 00100000 ...
Image Name: Simple Embedded Linux Framework
Created: 2005-06-07 12:59:15 UTC
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 1625993 Bytes = 1.6 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
3.) erase the flash
=> erase 40100000 403FFFFF
.............. done
Erased 24 sectors
4.) Copying the image
=> cp 100000 40100000 18cfc9
Copy to Flash... Flash not Erased
What is this?? Now I can't even copy things into flash. After copying for
a while it brings this error.
Second attempt: istead of erasing 40100000 to 403FFFFF I erase what is
needed :
=> erase 4010000 +18CFC9
...... done
Erased 13 sectors
=> cp 100000 40100000 18CFC9
Copy to Flash... Flash not Erased
I have no clue what is going on here?
Any input for me?
thanks in advance
Thomas
More information about the U-Boot
mailing list