[U-Boot-Users] copy to flash ... outside available flash

[Wolfgang Denk]

In message <20061114104800.6dfba789 at localhost> you wrote:
> Here are the commands I loaded the image with:
> now I got a different error. It claim the flash wasn't erased?

Correct error message.

> => cp 100000 40100000  18cfc9
> Copy to Flash... Flash not Erased

Please RTFM about the correct use of the cp (resp. the cp.b) command.

> I have no clue what is going on here?
> Any input for me?

There were already two postings on this list which pointed  out  that
you are using hte "cp" command with wrong length parameter.

Please RTFM!!!! (ideally *before* posting)

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The alternative to genuflecting before the  god  of  code-bumming  is
finding  a  better  algorithm.  It should be clear that none such was
available. If your code is too slow, you must make it faster.  If  no
better algorithm is available, you must trim cycles.
                                 - td at alice.UUCP (Tom Duff) 29 Aug 88