[U-Boot-Users] U-boot reset command on MPC8548CDS

[Thomas Schafer]

Hi,

I have u-boot 1.1.6 running on my MPC8548CDS board. When trying the
u-boot 'reset' command, the board hangs after RAM initialization.
Stepping through the code showed, that the board hangs when accessing
the DDR RAM during relocation. Accessing RAM isn't also possible with my
BDI2000 in that state.

Is this a known issue? Why is the RAM not longer accessible after the
2nd initialization?

Best regards,

Thomas Schafer

____________________________________

Kontron Modular Computers GmbH

Heinrich-Barth-Str. 1a
66115 Saarbrucken

Tel.: + 49 (0)681 / 95916 - 203
Fax:  + 49 (0)681 / 95916 - 100
E-mail: thomas.schaefer at kontron.com