[U-Boot-Users] board config file problem

[Zhao Tongyi]

thanks very much.I am  trying do  it.

2006/11/24, Stefan Roese <sr at denx.de>:
>
> On Friday 24 November 2006 03:42, Zhao Tongyi wrote:
> > I have my own board, so I can't choose board type from board dir.
> > I have modified the most close board like HH405.h to compiled.but that
> > isn't run at all.
> > my board
> > powerpc 405EP and itself two network chips,and two rl8139 clip,
> > 32msdram ,
> > 32m sumsung nand
>
> Just a note: The HH405 board uses UART1 and _not_ UART0 as the U-Boot
> console.
> If this is not what you need you have to change the config file
> accordingly.
>
> > I want to see the boot information from serial and get image from tftp
> > how I config the board config file ?
> > anyone give me a example ?
>
> Porting U-Boot from one board to another is not always that simple. Deeper
> knowledge of U-Boot and of course of the new hardware is required.
>
> Best regards,
> Stefan
>



-- 
Best regards,

Tongyi ,Zhao
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20061124/e5a2e970/attachment.htm