[U-Boot-Users] Regarding MPC8280 boot

[Wolfgang Denk]

In message <456DA6F5.4060001 at rassit.com> you wrote:
> 
> We have a MPC8280 custom board and we are using u-boot-1.1.6 and 
> successfully booting u-boot.
> 
> Now we are trying to compile linux 2.6.14 source available are 
> www.denx.de and trying to use PM82x project and boot linux
> 
> We have changed only the IMMR address and enabled debug messages in make 
> menuconfig
> 
> We are finding that we are not able to get any messages as such .
> 
> So please tell what could be wrong ?

Anything could be wront. For a start, you should *port* Linux to your
baord, and not just make one single change and assume everything would
fall in place.

And please note that all this is off topic on this list.

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
To be sure of hitting the target, shoot first and, whatever you  hit,
call it the target.