[U-Boot-Users] [PATCH] MPC8641HPCN u-boot.lds problem with ELDK 4.0

Tolunay Orkun listmember at orkun.us
Thu Nov 30 23:17:22 CET 2006


Chris Fester wrote:
> Hi all,
> 
> I recently have been attempting to get u-boot working on my MPC8641HPCN
> evaulation board (AKA the Argo Navis platform).  I faced a problem
> compiling the latest git source with the ELDK 4.0 and getting it to work
> on the board.  The processor would run off into the weeds when doing the
> command table relocation step in lib_ppc/board.c:633.  After debugging
> with a BDI, some head scratching, and a few google searches, it came
> down to an issue with the linker, which seems to have been a common
> problem in the past for this mail list.  Please see the thread at:
> http://sourceware.org/ml/binutils/2005-08/msg00412.html.


I answered the same issue for someone else this week. This issue is 
fixed by the patch that went in Aug 31, 2005. As far as I can see, the 
change was for all boards in the public tree back then.

http://www.denx.de/cgi-bin/gitweb.cgi?p=u-boot.git;a=commit;h=807d5d7319330e336ab34a5623c5e0d73b87d540

>  
> * Fix to linker script for mpc8641hpcn platform to enable a correct
>     symbol table with ELDK 4.0 linker.
> 
> 
> diff --git a/board/mpc8641hpcn/u-boot.lds b/board/mpc8641hpcn/u-boot.lds
> index b34de8e..c2f6727 100644
> --- a/board/mpc8641hpcn/u-boot.lds
> +++ b/board/mpc8641hpcn/u-boot.lds
> @@ -120,7 +120,7 @@ SECTIONS
>    _edata  =  .;
>    PROVIDE (edata = .);
> 
> -  __u_boot_cmd_start = .;
> +  __u_boot_cmd_start = ADDR(.u_boot_cmd);
>    .u_boot_cmd : { *(.u_boot_cmd) }
>    __u_boot_cmd_end = .;


Please that a look at the fix done for other boards (say mpc8560ads). 
They add two lines of ". = ." which fixes this and a similar issue with 
__start___ex_table symbol. I think it would be better if the issue is 
fixed in the same way. (I am not saying your solution is wrong, but this 
is more consistent)

Tolunay


PS: Wolfgang, perhaps this should be a FAQ?




More information about the U-Boot mailing list