[U-Boot-Users] U-boot AMCC yosemite board 440EP
Wolfgang Denk
wd at denx.de
Thu Oct 5 17:38:46 CEST 2006
Dear Tobias,
please start reading http://www.afaik.de/usenet/faq/zitieren/
In message <DA3CC5B292645843B5E8C544EFBC71B6310296 at exchange1.jetter.local> you wrote:
>
> It seems to me that the SDRAM initialization for your new board is broken/
> incomplete. You need to fix it.
>
> Tobias: But i programmed the original u-boot into the flash. Because of this
> it is the correct Initialization !
It is the correct initialization for the yosemite board, but not for
your hardware. You must *port* U-Boot to your hardware.
This has been explained to you before.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
When some people discover the truth, they just can't understand why
everybody isn't eager to hear it.
More information about the U-Boot
mailing list