[U-Boot-Users] U-boot 1.1.4 with TI Davinci EVM

[Srinivasan, Nageswari]

Hi,

Sorry for the mail with no information.

I am using it on the ARM926EJS platform on a TI Davinci EVM.

U-boot 1.1.4 gets build correctly with the gcc 3.4.3 version, but there
is no output on the serial terminal.

U-boot runs fine from SRAM but when booted from NOR flash, there is no
output on the serial port.

Is there any specific step needs to be taken when running the code from
flash. (Intel strata flash).

Regards,
Nageswari.S

-----Original Message-----
From: wd at denx.de [mailto:wd at denx.de] 
Sent: Monday, October 16, 2006 12:55 PM
To: Srinivasan, Nageswari
Cc: u-boot-users at lists.sourceforge.net
Subject: Re: [U-Boot-Users] U-Boot-Users Digest, Vol 5, Issue 43 


Please start reading
http://www.catb.org/%7eesr/faqs/smart-questions.html


Please provide a meaningful Subject when posting on this list!!!

Please do not reply to unrelated messages, as this will cause
incorrect message thrading!

In message <5DF83221BE20114E9C331F665ACBC08002055D8B at dbde01.ent.ti.com>
you wrote:
> 
> I am trying to use U-boot 1.1.4 with the gccversion 3.4.3 (Montavista
> tool chain). U-Boot builds OK but no output on the serial port. The
same
> U-boot source was working fine with the previous version of tool
chain.
> 
> Have any one faced this problem before with the 3.4.3 tool chain.

You don't mention which architecture or board you are talking abouyt.
Is this a custom board, or one of the supported boards?

> -----Original Message-----
> From: u-boot-users-bounces at lists.sourceforge.net
> [mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of
> u-boot-users-request at lists.sourceforge.net
> Sent: Sunday, October 15, 2006 5:40 AM
> To: u-boot-users at lists.sourceforge.net
> Subject: U-Boot-Users Digest, Vol 5, Issue 43

And don't top post / full quote.

And don't quote completely unrelated text.


Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Many Myths are based on truth
	-- Spock, "The Way to Eden",  stardate 5832.3