[U-Boot-Users] tsec help

[Reeve Yang]

Hello,

My cpu is MPC8343E with dual tsec, phy is marvell 88E1111S. Now the physical
link is up, but I just cannot ping. I printed some debug message about
maccfg1/2 registers:

=> ping 192.168.1.1
tsec_halt
Trying TSEC0
tsec_halt
Speed: 100, full duplex
TSEC0: maccfg2 = 0x7205
TSEC0: maccfg1 = 0xf
Using TSEC0 device
tsec_halt
ping failed; host 192.168.1.1 is not alive

I checked the MAC transmi counter register there are packets sending out,
but no packet on the wire. The PHY is hard wired into RGMII to copper mode.
Could anyone who has done similiar work point to where the problem is? Where
to look at?

Regards,

- Reeve
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20061027/d428e4e1/attachment.htm