[U-Boot-Users] [PATCH 1/2] Add support for multiple I2C buses

Ben Warren bwarren at qstreams.com
Thu Sep 7 22:50:54 CEST 2006


Hello,

Attached is a patch providing support for multiple I2C buses at the
command level.  The second part of the patch includes an implementation
for the MPC834x CPU and MPC8349EMDS board.

/*** Note: This patch replaces ticket DNX#2006083042000018 ***/

Signed-off-by: Ben Warren <bwarren at qstreams.com>

Overview:

1. Include new 'i2c' command (based on USB implementation) using
CONFIG_I2C_CMD_TREE.  

2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS.  Note that
the commands to change bus number and speed are only available under the
new 'i2c' command mentioned in the first bullet.

3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus
systems.  When CONFIG_I2C_MULTI_BUS is used, this option takes the form
of an array of bus-device pairs.  Otherwise, it is an array of uchar. 

CHANGELOG:
        Added new 'i2c' master command for all I2C interaction.  This is
conditionally compiled with CONFIG_I2C_CMD_TREE.  New commands added for
setting I2C bus speed as well as changing the active bus if the board
has more than one (conditionally compiled with
CONFIG_I2C_MULTI_BUS).  Updated NOPROBE logic to handle multiple buses.
Updated README.

regards,
Ben

-------------- next part --------------
A non-text attachment was scrubbed...
Name: i2c_multibus.PATCH
Type: text/x-patch
Size: 9128 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20060907/4a89a054/attachment.bin 


More information about the U-Boot mailing list