[U-Boot-Users] uboot for TI DSP c6000

[Frank]

--- paul burrell <paul at burrellhome.com> wrote:

> Frank,
> What am I missing here?   Sounds like you have some
> experience, so could you
> answer a couple of questions.
> 
> First I should clarify a couple of things just in case I did
> not communicate
> them correctly.
> 
> The target is a TI TMS320C6204.  It is a DSP from TI using a
> C64 core.   It
> is not one of the OMAPs with an embedded ARM.   The normal GCC
> compiler set
> does not appear to support the C6000 process, but I just found
> some
> documentation indicating that might not be true.
> 
> 1.  So I went to the ELDK page (DENX).   According to the
> page, it only
> supports PowerPC.  I am going to download it and check, but
> that is all I
> see.  I did see that they have ARM, PPC, and MIPS directories,
> so it might
> be more than PPC.
> 2.  So lets say it does support it, what toolchain should I be
> looking at?
> Version numbers would be nice.
> 
> In the end, embedded linix is going to be more than what I
> need.   I am just
> trying to have a simple bootloader with the ability to edit
> memory, test
> functions, program flash, and load over a serial port.  I
> don't even need
> networking capability.
> 
> Any advice would be great.
> 
> Thanks,
> Paul
No, I missed something. I assumed you were working on the DM6446
with an ARM core and DSP and wanted to boot the board with the
ARM. if that's not the case, then I am off base...

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com