[U-Boot-Users] Newbie questions

[Bruce_Leonard at selinc.com]

Hi Dave,

David Hawkins <dwh at ovro.caltech.edu> wrote on 09/14/2006 02:17:49 PM:
> Hi Bruce
> 
> I can't answer all your questions as I too am fairly new to this,
> but ...
> 
> > 1) Will u-boot support a compact flash device on the local bus of an 
<snip>
> 
> Assuming the MPC8347 is much the same as the MPC8349E/EA, I doubt
> that you can use U-Boot on I2C EEPROM. The boot process of the
<snip>

Thanks for the answers.  I'm learning as fast as I can, but sometimes the 
HW folks want answers faster than my learning curve.  And yes the 8347 is 
an 8349 with a few parts missing.  Also thanks to everyone who provided 
helpfull and nice answers.  It's that sort of sharing that makes this 
place work.  As for the less than helpfull/nasty answers, well I'm just 
going to ignore you.

I apologize for the HTML.  I though I had it turned off and if I still 
don't I again apologize, please let me know (as I'm sure Wolfgang will 
do).  I don't know much about e-mail protocols, to me it's just a tool to 
facilitate communications, nothing more.  I also apologize for the 
confidentality notices but there's nothing I can do about that.  It's 
corporate policy and it's added automatically to all outgoing e-mails.  If 
it's found to be offensive I just won't post here anymore.

Thanks again to all.

Bruce
----------------------------------
This e-mail may contain SEL confidential or 
legally privileged information.  The opinions 
expressed are not necessarily those of SEL.  
Any unauthorized disclosure, distribution or 
other use is prohibited.  If you received this 
e-mail in error, please notify the sender, 
permanently delete it, and destroy any 
printed copies.