[U-Boot-Users] [PATCH 2/2] Add support for the MPC8349E-mITX

timur at freescale.com timur at freescale.com
Tue Sep 19 18:32:11 CEST 2006


From: Timur Tabi <timur at freescale.com>

PREREQUISITE PATCHES:

* This patch can only be applied after the following patches have been applied:

  1) DNX#2006090742000024 "Add support for multiple I2C buses"
  2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x"
  3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c"
  4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems"
  5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems"

CHANGELOG:

* Add support for the Freescale MPC8349E-mITX reference design platform.
  The second TSEC (Vitesse 7385 switch) is not supported at this time. 


Signed-off-by: Timur Tabi <timur at freescale.com>
---
 CREDITS                      |    5 
 MAINTAINERS                  |    4 
 MAKEALL                      |    2 
 Makefile                     |    3 
 README                       |    4 
 cpu/mpc83xx/cpu.c            |   81 ++++-
 cpu/mpc83xx/cpu_init.c       |   31 ++
 cpu/mpc83xx/i2c.c            |    2 
 cpu/mpc83xx/spd_sdram.c      |   21 +
 drivers/tsec.c               |    4 
 include/asm-ppc/immap_83xx.h |   16 +
 include/configs/MPC8349ITX.h |  753 ++++++++++++++++++++++++++++++++++++++++++
 12 files changed, 918 insertions(+), 8 deletions(-)

diff --git a/CREDITS b/CREDITS
index 32d3060..deede6b 100644
--- a/CREDITS
+++ b/CREDITS
@@ -461,3 +461,8 @@ N: James MacAulay
 E: james.macaulay at amirix.com
 D: Suppport for Amirix AP1000
 W: www.amirix.com
+
+N: Timur Tabi
+E: timur at freescale.com
+D: Support for MPC8349E-mITX
+W: www.freescale.com
diff --git a/MAINTAINERS b/MAINTAINERS
index 4262719..9b54436 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -337,6 +337,10 @@ John Zhan <zhanz at sinovee.com>
 
 	svm_sc8xx		MPC8xx
 
+Timur Tabi <timur at freescale.com>
+
+	MPC8349E-mITX		MPC8349
+
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:
diff --git a/MAKEALL b/MAKEALL
index 2a334ff..cd2fc6f 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -130,7 +130,7 @@ ## MPC83xx Systems (includes 8349, etc.)
 #########################################################################
 
 LIST_83xx="	\
-	TQM834x		MPC8349EMDS					\
+	TQM834x		MPC8349EMDS	MPC8349ITX			\
 "
 
 
diff --git a/Makefile b/Makefile
index ccf7f9f..e4d6ab5 100644
--- a/Makefile
+++ b/Makefile
@@ -1557,6 +1557,9 @@ TQM834x_config:	unconfig
 MPC8349EMDS_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds
 
+MPC8349ITX_config:	unconfig
+	@$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349itx
+
 #########################################################################
 ## MPC85xx Systems
 #########################################################################
diff --git a/README b/README
index be3e0f6..ba53ffd 100644
--- a/README
+++ b/README
@@ -2226,6 +2226,10 @@ Low Level (hardware related) configurati
 		If SPD EEPROM is on an I2C bus other than the first one, specify here.
 		Note that the value must resolve to something your driver can deal with.
 
+- CFG_83XX_DDR_USES_CS0
+		Only for 83xx systems. If specified, then DDR should be configured
+		using CS0 and CS1 instead of CS2 and CS3.
+
 - CONFIG_ETHER_ON_FEC[12]
 		Define to enable FEC[12] on a 8xx series processor.
 
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
index 20bba6c..e522f75 100644
--- a/cpu/mpc83xx/cpu.c
+++ b/cpu/mpc83xx/cpu.c
@@ -69,9 +69,72 @@ int checkcpu(void)
 }
 
 
+/**
+ * Program a UPM with the code supplied in the table.
+ *
+ * The 'dummy' variable is used to increment the MAD. 'dummy' is
+ * supposed to be a pointer to the memory of the device being
+ * programmed by the UPM.  The data in the MDR is written into
+ * memory and the MAD is incremented every time there's a read
+ * from 'dummy'. Unfortunately, the current prototype for this
+ * function doesn't allow for passing the address of this
+ * device, and changing the prototype will break a number lots
+ * of other code, so we need to use a round-about way of finding
+ * the value for 'dummy'.
+ *
+ * The value can be extracted from the base address bits of the
+ * Base Register (BR) associated with the specific UPM.  To find
+ * that BR, we need to scan all 8 BRs until we find the one that
+ * has its MSEL bits matching the UPM we want.  Once we know the
+ * right BR, we can extract the base address bits from it.
+ *
+ * The MxMR and the BR and OR of the chosen bank should all be
+ * configured before calling this function.
+ *
+ * Parameters:
+ * upm: 0=UPMA, 1=UPMB, 2=UPMC
+ * table: Pointer to an array of values to program
+ * size: Number of elements in the array.  Must be 64 or less.
+*/
 void upmconfig (uint upm, uint *table, uint size)
 {
-	hang();		/* FIXME: upconfig() needed? */
+#if defined(CONFIG_MPC834X)
+	volatile immap_t *immap = (immap_t *) CFG_IMMRBAR;
+	volatile lbus8349_t *lbus = &immap->lbus;
+	volatile uchar *dummy = NULL;
+	const u32 msel = (upm + 4) << BR_MSEL_SHIFT;	/* What the MSEL field in BRn should be */
+	volatile u32 *mxmr = &lbus->mamr + upm;	/* Pointer to mamr, mbmr, or mcmr */
+	uint i;
+
+	/* Scan all the banks to determine the base address of the device */
+	for (i = 0; i < 8; i++) {
+		if ((lbus->bank[i].br & BR_MSEL) == msel) {
+			dummy = (uchar *) (lbus->bank[i].br & BR_BA);
+			break;
+		}
+	}
+
+	if (!dummy) {
+		printf("Error: %s() could not find matching BR\n", __FUNCTION__);
+		hang();
+	}
+
+	/* Set the OP field in the MxMR to "write" and the MAD field to 000000 */
+	*mxmr = (*mxmr & 0xCFFFFFC0) | 0x10000000;
+
+	for (i = 0; i < size; i++) {
+		lbus->mdr = table[i];
+		__asm__ __volatile__ ("sync");
+		*dummy;	/* Write the value to memory and increment MAD */
+		__asm__ __volatile__ ("sync");
+	}
+
+	/* Set the OP field in the MxMR to "normal" and the MAD field to 000000 */
+	*mxmr &= 0xCFFFFFC0;
+#else
+	printf("Error: %s() not defined for this configuration.\n", __FUNCTION__);
+	hang();
+#endif
 }
 
 
@@ -150,9 +213,21 @@ unsigned long get_tbclk(void)
 #if defined(CONFIG_WATCHDOG)
 void watchdog_reset (void)
 {
-	hang();		/* FIXME: implement watchdog_reset()? */
+#ifdef CONFIG_MPC834X
+	int re_enable = disable_interrupts();
+
+	/* Reset the 83xx watchdog */
+	volatile immap_t *immr = (immap_t *) CFG_IMMRBAR;
+	immr->wdt.swsrr = 0x556c;
+	immr->wdt.swsrr = 0xaa39;
+
+	if (re_enable)
+		enable_interrupts ();
+#else
+	hang();
+#endif
 }
-#endif /* CONFIG_WATCHDOG */
+#endif
 
 #if defined(CONFIG_OF_FLAT_TREE)
 void
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index 6ed0992..999fe71 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -46,6 +46,37 @@ void cpu_init_f (volatile immap_t * im)
 	/* Clear initial global data */
 	memset ((void *) gd, 0, sizeof (gd_t));
 
+	/* system performance tweaking */
+
+#ifdef CFG_ACR_PIPE_DEP
+	/* Arbiter pipeline depth */
+	im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) | (3 << ACR_PIPE_DEP_SHIFT);
+#endif
+
+#ifdef CFG_SPCR_TSEC1EP
+	/* TSEC1 Emergency priority */
+	im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC1EP) | (3 << SPCR_TSEC1EP_SHIFT);
+#endif
+
+#ifdef CFG_SPCR_TSEC2EP
+	/* TSEC2 Emergency priority */
+	im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC2EP) | (3 << SPCR_TSEC2EP_SHIFT);
+#endif
+
+#ifdef CFG_SCCR_TSEC1CM
+	/* TSEC1 clock mode */
+	im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1CM) | (1 << SCCR_TSEC1CM_SHIFT);
+#endif
+#ifdef CFG_SCCR_TSEC2CM
+	/* TSEC2 & I2C1 clock mode */
+	im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2CM) | (1 << SCCR_TSEC2CM_SHIFT);
+#endif
+
+#ifdef CFG_ACR_RPTCNT
+	/* Arbiter repeat count */
+	im->arbiter.acr = ((im->arbiter.acr & ~(ACR_RPTCNT)) | (3 << ACR_RPTCNT_SHIFT));
+#endif
+
 	/* RSR - Reset Status Register - clear all status (4.6.1.3) */
 	gd->reset_status = im->reset.rsr;
 	im->reset.rsr = ~(RSR_RES);
diff --git a/cpu/mpc83xx/i2c.c b/cpu/mpc83xx/i2c.c
index ba343ec..21b902c 100644
--- a/cpu/mpc83xx/i2c.c
+++ b/cpu/mpc83xx/i2c.c
@@ -89,7 +89,7 @@ static int set_speed(int speed)
 	}
 	else
 	{
-		printf("Max I2C bus speed %d not supported\n", gd->i2c_clk);
+		debug("Max I2C bus speed %d not supported\n", gd->i2c_clk);
 		return -1;
 	}
 
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
index ceb5b42..f8d0ad2 100644
--- a/cpu/mpc83xx/spd_sdram.c
+++ b/cpu/mpc83xx/spd_sdram.c
@@ -133,6 +133,26 @@ #endif
 		return 0;
 	}
 
+#ifdef CFG_83XX_DDR_USES_CS0
+	ddr->csbnds[0].csbnds = (banksize(spd.row_dens) >> 24) - 1;
+	ddr->cs_config[0] = ( 1 << 31
+			    | (spd.nrow_addr - 12) << 8
+			    | (spd.ncol_addr - 8) );
+	debug("\n");
+	debug("cs0_bnds = 0x%08x\n",ddr->csbnds[0].csbnds);
+	debug("cs0_config = 0x%08x\n",ddr->cs_config[0]);
+
+	if (spd.nrows == 2) {
+		ddr->csbnds[1].csbnds = ( (banksize(spd.row_dens) >> 8)
+				  | ((banksize(spd.row_dens) >> 23) - 1) );
+		ddr->cs_config[1] = ( 1<<31
+				    | (spd.nrow_addr-12) << 8
+				    | (spd.ncol_addr-8) );
+		debug("cs1_bnds = 0x%08x\n",ddr->csbnds[1].csbnds);
+		debug("cs1_config = 0x%08x\n",ddr->cs_config[1]);
+	}
+
+#else
 	ddr->csbnds[2].csbnds = (banksize(spd.row_dens) >> 24) - 1;
 	ddr->cs_config[2] = ( 1 << 31
 			    | (spd.nrow_addr - 12) << 8
@@ -150,6 +170,7 @@ #endif
 		debug("cs3_bnds = 0x%08x\n",ddr->csbnds[3].csbnds);
 		debug("cs3_config = 0x%08x\n",ddr->cs_config[3]);
 	}
+#endif
 
 	if (spd.mem_type != 0x07) {
 		puts("No DDR module found!\n");
diff --git a/drivers/tsec.c b/drivers/tsec.c
index 7ec565c..0ebea4b 100644
--- a/drivers/tsec.c
+++ b/drivers/tsec.c
@@ -993,10 +993,8 @@ struct phy_info phy_info_dp83865 = {
 };
 
 struct phy_info *phy_info[] = {
-#if 0
-	&phy_info_cis8201,
-#endif
 	&phy_info_cis8204,
+	&phy_info_cis8201,
 	&phy_info_M88E1011S,
 	&phy_info_M88E1111S,
 	&phy_info_dm9161,
diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
index c2b4c5c..ad90fa5 100644
--- a/include/asm-ppc/immap_83xx.h
+++ b/include/asm-ppc/immap_83xx.h
@@ -57,15 +57,25 @@ #define SPRIDR_REVID          0x0000FFFF
 	u8 res5[0x04];
 	u32 spcr; /* System Priority Configuration Register */
 #define SPCR_PCIHPE   0x10000000 /* PCI Highest Priority Enable. */
+#define SPCR_PCIHPE_SHIFT	(31-3)
 #define SPCR_PCIPR    0x03000000 /* PCI bridge system bus request priority. */
+#define SPCR_PCIPR_SHIFT	(31-7)
 #define SPCR_TBEN     0x00400000 /* E300 PowerPC core time base unit enable. */
+#define SPCR_TBEN_SHIFT		(31-9)
 #define SPCR_COREPR   0x00300000 /* E300 PowerPC Core system bus request priority. */
+#define SPCR_COREPR_SHIFT	(31-11)
 #define SPCR_TSEC1DP  0x00003000 /* TSEC1 data priority. */
+#define SPCR_TSEC1DP_SHIFT	(31-19)
 #define SPCR_TSEC1BDP 0x00000C00 /* TSEC1 buffer descriptor priority. */
+#define SPCR_TSEC1BDP_SHIFT	(31-21)
 #define SPCR_TSEC1EP  0x00000300 /* TSEC1 emergency priority. */
+#define SPCR_TSEC1EP_SHIFT	(31-23)
 #define SPCR_TSEC2DP  0x00000030 /* TSEC2 data priority. */
+#define SPCR_TSEC2DP_SHIFT	(31-27)
 #define SPCR_TSEC2BDP 0x0000000C /* TSEC2 buffer descriptor priority. */
+#define SPCR_TSEC2BDP_SHIFT	(31-29)
 #define SPCR_TSEC2EP  0x00000003 /* TSEC2 emergency priority. */
+#define SPCR_TSEC2EP_SHIFT	(31-31)
 #define SPCR_RES      ~(SPCR_PCIHPE | SPCR_PCIPR | SPCR_TBEN | SPCR_COREPR \
 			| SPCR_TSEC1DP | SPCR_TSEC1BDP | SPCR_TSEC1EP \
 			| SPCR_TSEC2DP | SPCR_TSEC2BDP | SPCR_TSEC2EP)
@@ -370,11 +380,17 @@ #define SERCR_RES ~(SERCR_MCPR)
 typedef struct arbiter8349 {
 	u32 acr; /* Arbiter Configuration Register */
 #define ACR_COREDIS    0x10000000 /* Core disable. */
+#define ACR_COREDIS_SHIFT		(31-7)
 #define ACR_PIPE_DEP   0x00070000 /* Pipeline depth (number of outstanding transactions). */
+#define ACR_PIPE_DEP_SHIFT		(31-15)
 #define ACR_PCI_RPTCNT 0x00007000 /* PCI repeat count. */
+#define ACR_PCI_RPTCNT_SHIFT		(31-19)
 #define ACR_RPTCNT     0x00000700 /* Repeat count. */
+#define ACR_RPTCNT_SHIFT		(31-23)
 #define ACR_APARK      0x00000030 /* Address parking. */
+#define ACR_APARK_SHIFT			(31-27)
 #define ACR_PARKM	   0x0000000F /* Parking master. */
+#define ACR_PARKM_SHIFT			(31-31)
 #define ACR_RES ~(ACR_COREDIS|ACR_PIPE_DEP|ACR_PCI_RPTCNT|ACR_RPTCNT|ACR_APARK|ACR_PARKM)
 	u32 atr; /* Arbiter Timers Register */
 #define ATR_DTO 0x00FF0000 /* Data time out. */
diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h
new file mode 100644
index 0000000..aed350f
--- /dev/null
+++ b/include/configs/MPC8349ITX.h
@@ -0,0 +1,753 @@
+/*
+ * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ MPC8349E-mITX board configuration file
+
+ Memory map:
+
+ 0x0000_0000-0x0FFF_FFFF DDR SDRAM (256 MB)
+ 0x8000_0000-0x9FFF_FFFF PCI1 memory space (512 MB)
+ 0xA000_0000-0xBFFF_FFFF PCI2 memory space (512 MB)
+ 0xE000_0000-0xEFFF_FFFF IMMR (1 MB)
+ 0xE200_0000-0xE2FF_FFFF PCI1 I/O space (16 MB)
+ 0xE300_0000-0xE3FF_FFFF PCI2 I/O space (16 MB)
+ 0xF000_0000-0xF000_FFFF Compact Flash
+ 0xF001_0000-0xF001_FFFF Local bus expansion slot
+ 0xF800_0000-0xF801_FFFF GBE L2 Switch VSC7385
+ 0xFF00_0000-0xFF7F_FFFF Alternative bank of Flash memory (8MB)
+ 0xFF80_0000-0xFFFF_FFFF Boot Flash (8 MB)
+
+ I2C address list:
+ 						Align.	Board
+ Bus	Addr    Part No.	Description	Length	Location
+ ----------------------------------------------------------------
+ I2C1	0x50    M24256-BWMN6P	Board EEPROM	2       U64
+
+ I2C2	0x20    PCF8574		I2C Expander	0	U8
+ I2C2	0x21    PCF8574		I2C Expander	0       U10
+ I2C2	0x38    PCF8574A	I2C Expander    0	U8
+ I2C2	0x39    PCF8574A	I2C Expander	0	U10
+ I2C2	0x51    (DDR)		DDR EEPROM	1	U1
+ I2C2	0x68    DS1339		RTC		1	U68
+
+ Note that a given board has *either* a pair of 8574s or a pair of 8574As.
+*/
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#undef DEBUG
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_MPC834X		/* MPC834x family (8343, 8347, 8349) */
+#define CONFIG_MPC8349		/* MPC8349 specific */
+
+#define CONFIG_PCI
+
+#define CONFIG_COMPACT_FLASH	/* The CF card interface on the back of the board */
+#define CONFIG_RTC_DS1337
+
+/* I2C */
+#define CONFIG_HARD_I2C
+
+#ifdef CONFIG_HARD_I2C
+
+#define CONFIG_MISC_INIT_F
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CFG_I2C_OFFSET      	0x3000
+#define CFG_I2C2_OFFSET      	0x3100
+#define CFG_SPD_BUS_NUM		I2C_2
+
+#define CFG_I2C_8574_ADDR1	0x20	/* I2C2, PCF8574 */
+#define CFG_I2C_8574_ADDR2	0x21	/* I2C2, PCF8574 */
+#define CFG_I2C_8574A_ADDR1	0x38	/* I2C2, PCF8574A */
+#define CFG_I2C_8574A_ADDR2	0x39	/* I2C2, PCF8574A */
+#define CFG_I2C_EEPROM_ADDR	0x50    /* I2C1, Board EEPROM */
+#define CFG_I2C_RTC_ADDR	0x68	/* I2C2, DS1339 RTC*/
+#define SPD_EEPROM_ADDRESS	0x51	/* I2C2, DDR */
+
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_SLAVE		0x7F
+
+/* Don't probe these addresses: */
+#define CFG_I2C_NOPROBES        {{1, CFG_I2C_8574_ADDR1}, \
+				 {1, CFG_I2C_8574_ADDR2}, \
+				 {1, CFG_I2C_8574A_ADDR1}, \
+				 {1, CFG_I2C_8574A_ADDR2}}
+/* Bit definitions for the 8574[A] I2C expander */
+#define I2C_8574_REVISION	0x03	/* Board revision, 00=0.0, 01=0.1, 10=1.0 */
+#define I2C_8574_CF		0x08	/* 1=Compact flash absent, 0=present */
+#define I2C_8574_MPCICLKRN	0x10	/* MiniPCI Clk Run */
+#define I2C_8574_PCI66		0x20	/* 0=33MHz PCI, 1=66MHz PCI */
+#define I2C_8574_FLASHSIDE	0x40	/* 0=Reset vector from U4, 1=from U7*/
+
+#undef CONFIG_SOFT_I2C
+
+#endif
+
+#define CONFIG_TSEC_ENET		/* tsec ethernet support */
+#define CONFIG_ENV_OVERWRITE
+
+#define PCI_66M
+#ifdef PCI_66M
+#define CONFIG_83XX_CLKIN	66666666	/* in Hz */
+#else
+#define CONFIG_83XX_CLKIN	33333333	/* in Hz */
+#endif
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#ifdef PCI_66M
+#define CONFIG_SYS_CLK_FREQ	66666666
+#else
+#define CONFIG_SYS_CLK_FREQ	33333333
+#endif
+#endif
+
+#define CFG_IMMRBAR		0xE0000000	/* The IMMR is relocated to here */
+
+#undef CFG_DRAM_TEST                   		/* memory test, takes time */
+#define CFG_MEMTEST_START       0x00003000      /* memtest region */
+#define CFG_MEMTEST_END         0x07100000      /* only has 128M */
+
+/*
+ * DDR Setup
+ */
+#undef CONFIG_DDR_ECC			/* only for ECC DDR module */
+#undef CONFIG_DDR_ECC_CMD		/* use DDR ECC user commands */
+#define CONFIG_SPD_EEPROM		/* use SPD EEPROM for DDR setup*/
+
+/*
+ * 32-bit data path mode.
+ *
+ * Please note that using this mode for devices with the real density of 64-bit
+ * effectively reduces the amount of available memory due to the effect of
+ * wrapping around while translating address to row/columns, for example in the
+ * 256MB module the upper 128MB get aliased with contents of the lower
+ * 128MB); normally this define should be used for devices with real 32-bit
+ * data path.
+ */
+#undef CONFIG_DDR_32BIT
+
+#define CFG_DDR_BASE	0x00000000	/* DDR is system memory*/
+#define CFG_SDRAM_BASE CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE CFG_DDR_BASE
+#undef  CONFIG_DDR_2T_TIMING
+#define CFG_83XX_DDR_USES_CS0
+
+#ifndef CONFIG_SPD_EEPROM
+/*
+ * Manually set up DDR parameters
+ */
+    #define CFG_DDR_SIZE	256		/* Mb */
+    #define CFG_DDR_CONFIG	(CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10)
+
+    #define CFG_DDR_TIMING_1	0x26242321
+    #define CFG_DDR_TIMING_2	0x00000800  /* P9-45, may need tuning */
+#endif
+
+/* FLASH on the Local Bus */
+#define CFG_FLASH_CFI				/* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER			/* use the CFI driver */
+#define CFG_FLASH_BASE		0xFE000000	/* start of FLASH   */
+#define CFG_FLASH_SIZE		16		/* FLASH size in MB */
+
+#define CFG_BR0_PRELIM		(CFG_FLASH_BASE | BR_PS_16 | BR_V)
+#define CFG_OR0_PRELIM		((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \
+				OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
+				OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
+#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE	/* Window base at flash base */
+#define CFG_LBLAWAR0_PRELIM	0x80000017	/* 16Mb window bytes */
+
+/* VSC7385 on the Local Bus */
+#define CFG_VSC7385_BASE	0xF8000000	/* start of VSC7385   */
+
+#define CFG_BR1_PRELIM		(CFG_VSC7385_BASE | BR_PS_8 | BR_V)
+#define CFG_OR1_PRELIM		(0xFFFE0000 /* 128KB */ | \
+				OR_GPCM_CSNT | OR_GPCM_XACS | OR_GPCM_SCY_15 | \
+				OR_GPCM_SETA | OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
+
+#define CFG_LBLAWBAR1_PRELIM	CFG_VSC7385_BASE	/* Access window base at VSC7385 base */
+#define CFG_LBLAWAR1_PRELIM	0x80000010		/* Access window size 128K */
+
+#define CFG_MAX_FLASH_BANKS	2		/* number of banks */
+#define CFG_MAX_FLASH_SECT	135		/* sectors per device */
+
+#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE + 0x800000}
+
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+
+#define CFG_LED_BASE		0xF9000000  /* start of LED and Board ID */
+#define CFG_BR2_PRELIM		(CFG_LED_BASE | BR_PS_8 | BR_V)
+#define CFG_OR2_PRELIM		(0xFFE00000 /* 2MB */ | \
+				OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | \
+				OR_GPCM_SCY_9 | \
+				OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
+
+#ifdef CONFIG_COMPACT_FLASH
+
+#define CFG_CF_BASE	    	0xF0000000
+
+#define CFG_BR3_PRELIM      	(CFG_CF_BASE | BR_PS_16 | BR_MS_UPMA | BR_V)
+#define CFG_OR3_PRELIM	    	(OR_UPM_AM | OR_UPM_BI)
+
+#define CFG_LBLAWBAR2_PRELIM	CFG_CF_BASE	/* Window base at flash base + LED & Board ID */
+#define CFG_LBLAWAR2_PRELIM 	0x8000000F	/* 64K bytes */
+
+#undef CONFIG_IDE_RESET
+#undef CONFIG_IDE_PREINIT
+
+#define CFG_IDE_MAXBUS		1
+#define CFG_IDE_MAXDEVICE	1
+
+#define CFG_ATA_IDE0_OFFSET	0x0000
+#define CFG_ATA_BASE_ADDR	CFG_CF_BASE
+#define CFG_ATA_DATA_OFFSET	0x0000
+#define CFG_ATA_REG_OFFSET	0
+#define CFG_ATA_ALT_OFFSET	0x0200
+#define CFG_ATA_STRIDE		2
+
+#define ATA_RESET_TIME	1	/* If a CF card is not inserted, time out quickly */
+
+#endif
+
+#define CONFIG_DOS_PARTITION
+
+#define CFG_MID_FLASH_JUMP      0x7F000000
+#define CFG_MONITOR_BASE    	TEXT_BASE	/* start of monitor */
+
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef  CFG_RAMBOOT
+#endif
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK
+#define CFG_INIT_RAM_ADDR	0xFD000000		/* Initial RAM address */
+#define CFG_INIT_RAM_END    	0x1000	     /* End of used area in RAM*/
+
+#define CFG_GBL_DATA_SIZE  	0x100     /* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN	    	(256 * 1024) /* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN	    	(128 * 1024) /* Reserved for malloc */
+
+/*
+ * Local Bus LCRR and LBCR regs
+ *    LCRR:  DLL bypass, Clock divider is 4
+ * External Local Bus rate is
+ *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
+ */
+#define CFG_LCRR	(LCRR_DBYP | LCRR_CLKDIV_4)
+#define CFG_LBC_LBCR	0x00000000
+
+#undef CFG_LB_SDRAM	/* if board has SRDAM on local bus */
+
+#ifdef CFG_LB_SDRAM
+/*local bus BR2, OR2 definition for SDRAM if soldered on the ADS board*/
+/*
+ * Base Register 2 and Option Register 2 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR2, need:
+ *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ *    port-size = 32-bits = BR2[19:20] = 11
+ *    no parity checking = BR2[21:22] = 00
+ *    SDRAM for MSEL = BR2[24:26] = 011
+ *    Valid = BR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861
+ */
+
+#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
+#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+
+#define CFG_LBLAWBAR2_PRELIM	0xF0000000
+#define CFG_LBLAWAR2_PRELIM	0x80000019 /* 64M */
+
+#define CFG_BR2_PRELIM		(CFG_LBC_SDRAM_BASE | BR_PS_32 | BR_MS_SDRAM | BR_V)
+#define CFG_OR2_PRELIM		(0xFC000000 /* 64 MB */ | \
+				 OR_SDRAM_XAM | \
+				 ((9 - 7) << OR_SDRAM_COLS_SHIFT) | \
+				 ((13 - 9) << OR_SDRAM_ROWS_SHIFT) | \
+				 OR_SDRAM_EAD)
+
+#define CFG_LBC_LSRT	0x32000000    /* LB sdram refresh timer, about 6us */
+#define CFG_LBC_MRTPR	0x20000000    /* LB refresh timer prescal, 266MHz/32*/
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_RFEN	(1 << (31 -  1))
+#define CFG_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
+#define CFG_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
+#define CFG_LBC_LSDMR_RFCR5	(3 << (31 - 16))
+#define CFG_LBC_LSDMR_RFCR8	(5 << (31 - 16))
+#define CFG_LBC_LSDMR_RFCR16	(7 << (31 - 16))
+#define CFG_LBC_LSDMR_PRETOACT3	(3 << (31 - 19))
+#define CFG_LBC_LSDMR_PRETOACT6	(5 << (31 - 19))
+#define CFG_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
+#define CFG_LBC_LSDMR_ACTTORW3	(3 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
+#define CFG_LBC_LSDMR_BL8	(1 << (31 - 23))
+#define CFG_LBC_LSDMR_WRC2	(2 << (31 - 27))
+#define CFG_LBC_LSDMR_WRC3	(3 << (31 - 27))
+#define CFG_LBC_LSDMR_WRC4	(0 << (31 - 27))
+#define CFG_LBC_LSDMR_BUFCMD	(1 << (31 - 29))
+#define CFG_LBC_LSDMR_CL3	(3 << (31 - 31))
+
+#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+
+#define CFG_LBC_LSDMR_COMMON    ( CFG_LBC_LSDMR_RFEN            \
+				| CFG_LBC_LSDMR_BSMA1516	\
+				| CFG_LBC_LSDMR_RFCR8		\
+				| CFG_LBC_LSDMR_PRETOACT6	\
+				| CFG_LBC_LSDMR_ACTTORW3	\
+				| CFG_LBC_LSDMR_BL8		\
+				| CFG_LBC_LSDMR_WRC3		\
+				| CFG_LBC_LSDMR_CL3		\
+				)
+
+/*
+ * SDRAM Controller configuration sequence.
+ */
+#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_PCHALL)
+#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_MRW)
+#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_NORMAL)
+#endif
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX	1
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1	(CFG_IMMRBAR + 0x4500)
+#define CFG_NS16550_COM2	(CFG_IMMRBAR + 0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef  CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+
+#ifdef CONFIG_PCI
+
+#define CONFIG_MPC83XX_PCI2
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE	0x80000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCI1_MMIO_BASE	(CFG_PCI1_MEM_BASE + CFG_PCI1_MEM_SIZE)
+#define CFG_PCI1_MMIO_PHYS	CFG_PCI1_MMIO_BASE
+#define CFG_PCI1_MMIO_SIZE	0x10000000	/* 256M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xE2000000
+#define CFG_PCI1_IO_SIZE	0x01000000	/* 16M */
+
+#ifdef CONFIG_MPC83XX_PCI2
+#define CFG_PCI2_MEM_BASE	(CFG_PCI1_MMIO_BASE + CFG_PCI1_MMIO_SIZE)
+#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
+#define CFG_PCI2_MEM_SIZE	0x10000000	/* 256M */
+#define CFG_PCI2_MMIO_BASE	(CFG_PCI2_MEM_BASE + CFG_PCI2_MEM_SIZE)
+#define CFG_PCI2_MMIO_PHYS	CFG_PCI2_MMIO_BASE
+#define CFG_PCI2_MMIO_SIZE	0x10000000	/* 256M */
+#define CFG_PCI2_IO_BASE	0x00000000
+#define CFG_PCI2_IO_PHYS	(CFG_PCI1_IO_PHYS + CFG_PCI1_IO_SIZE)
+#define CFG_PCI2_IO_SIZE	0x01000000	/* 16M */
+#endif
+
+#define _IO_BASE		0x00000000	/* points to PCI I/O space */
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP	               	/* do pci plug-and-play */
+
+#ifdef CONFIG_RTL8139
+/* This macro is used by RTL8139 but not defined in PPC architecture */
+#define KSEG1ADDR(x)	    (x)
+#endif
+
+#ifndef CONFIG_PCI_PNP
+    #define PCI_ENET0_IOADDR	0x00000000
+    #define PCI_ENET0_MEMADDR	CFG_PCI2_MEM_BASE
+    #define PCI_IDSEL_NUMBER	0x0f	/* IDSEL = AD15 */
+#endif
+
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+
+#endif
+
+/* TSEC */
+
+#ifdef CONFIG_TSEC_ENET
+
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI
+#endif
+
+#define CONFIG_MII
+#define CONFIG_PHY_GIGE		/* In case CFG_CMD_MII is specified */
+
+#define CONFIG_MPC83XX_TSEC1
+
+#ifdef CONFIG_MPC83XX_TSEC1
+#define CONFIG_MPC83XX_TSEC1_NAME  "TSEC0"
+#define CFG_TSEC1_OFFSET 	0x24000
+#define TSEC1_PHY_ADDR		0x1c    /* VSC8201 uses address 0x1c */
+#define TSEC1_PHYIDX		0
+#endif
+
+#ifdef CONFIG_MPC83XX_TSEC2
+#define CONFIG_MPC83XX_TSEC2_NAME  "TSEC1"
+#define CFG_TSEC2_OFFSET 	0x25000
+#define CONFIG_UNKNOWN_TSEC	/* TSEC2 is proprietary */
+#define TSEC2_PHY_ADDR		4
+#define TSEC2_PHYIDX		0
+#endif
+
+#define CONFIG_ETHPRIME		"Freescale TSEC"
+
+#endif
+
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+  #define CFG_ENV_IS_IN_FLASH
+  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+  #define CFG_ENV_SECT_SIZE	0x20000	/* 128K(one sector) for env */
+  #define CFG_ENV_SIZE		0x2000
+#else
+  #define CFG_NO_FLASH		/* Flash is not usable now */
+  #define CFG_ENV_IS_NOWHERE	/* Store ENV in memory only */
+  #define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+  #define CFG_ENV_SIZE		0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	/* allow baudrate change */
+
+/* CONFIG_COMMANDS */
+
+#ifdef CONFIG_COMPACT_FLASH
+#define CONFIG_COMMANDS_CF	(CFG_CMD_IDE | CFG_CMD_FAT)
+#else
+#define CONFIG_COMMANDS_CF	0
+#endif
+
+#ifdef CONFIG_PCI
+#define CONFIG_COMMANDS_PCI	CFG_CMD_PCI
+#else
+#define CONFIG_COMMANDS_PCI	0
+#endif
+
+#ifdef CONFIG_HARD_I2C
+#define CONFIG_COMMANDS_I2C	CFG_CMD_I2C
+#else
+#define CONFIG_COMMANDS_I2C	0
+#endif
+
+#define CONFIG_COMMANDS		(CONFIG_CMD_DFL	| \
+				CONFIG_COMMANDS_CF	| \
+				CFG_CMD_NET 	| \
+				CFG_CMD_PING 	| \
+				CONFIG_COMMANDS_I2C 	| \
+				CONFIG_COMMANDS_PCI 	| \
+				CFG_CMD_SDRAM 	| \
+				CFG_CMD_DATE	| \
+				CFG_CMD_CACHE	| \
+				CFG_CMD_IRQ)
+#include <cmd_confdefs.h>
+
+/* Watchdog */
+
+#undef CONFIG_WATCHDOG		/* watchdog disabled */
+#ifdef CONFIG_WATCHDOG
+#define CFG_WATCHDOG_VALUE      0xFFFFFFC3
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory	*/
+#define CFG_LOAD_ADDR	0x2000000	/* default load address */
+#define CFG_PROMPT	"MPC8349E-mITX> "		/* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+    #define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#else
+    #define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE 	(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE		32768
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log2 of the above value */
+#endif
+
+#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
+
+#define CFG_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_1X1 |\
+	HRCWL_CSB_TO_CLKIN_4X1 |\
+	HRCWL_VCO_1X2 |\
+	HRCWL_CORE_TO_CSB_2X1)
+
+#ifdef PCI_64BIT
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_64_BIT_PCI |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_PCI2_ARBITER_DISABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0X00000100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_TSEC1M_IN_GMII |\
+	HRCWH_TSEC2M_IN_GMII )
+#else
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_32_BIT_PCI |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_PCI2_ARBITER_DISABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0XFFF00100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_TSEC1M_IN_GMII |\
+	HRCWH_TSEC2M_IN_GMII )
+#endif
+
+/* System performance */
+#define CFG_ACR_PIPE_DEP	3	/* Arbiter pipeline depth (0-3) */
+#define CFG_ACR_RPTCNT		3	/* Arbiter repeat count (0-7) */
+#define CFG_SPCR_TSEC1EP	3	/* TSEC1 emergency priority (0-3) */
+#define CFG_SPCR_TSEC2EP	3	/* TSEC2 emergency priority (0-3) */
+#define CFG_SCCR_TSEC1CM	1	/* TSEC1 clock mode (0-3) */
+#define CFG_SCCR_TSEC2CM	1	/* TSEC2 & I2C1 clock mode (0-3) */
+#define CFG_ACR_RPTCNT		3	/* Arbiter repeat count */
+
+/* System IO Config */
+#define CFG_SICRH SICRH_TSOBI1	/* Needed for gigabit to work on TSEC 1 */
+#define CFG_SICRL SICRL_LDP_A
+
+#define CFG_HID0_INIT 0x000000000
+
+#define CFG_HID0_FINAL CFG_HID0_INIT
+
+#define CFG_HID2 	HID2_HBE
+
+/* DDR @ 0x00000000 */
+#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* PCI @ 0x80000000 */
+#ifdef CONFIG_PCI
+#define CFG_IBAT1L	(CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U	(CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT2L	(CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT2U	(CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#else
+#define CFG_IBAT1L	0
+#define CFG_IBAT1U	0
+#define CFG_IBAT2L	0
+#define CFG_IBAT2U	0
+#endif
+
+#ifdef CONFIG_MPC83XX_PCI2
+#define CFG_IBAT3L	(CFG_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT3U	(CFG_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT4L	(CFG_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT4U	(CFG_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#else
+#define CFG_IBAT3L	0
+#define CFG_IBAT3U	0
+#define CFG_IBAT4L	0
+#define CFG_IBAT4U	0
+#endif
+
+/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */
+#define CFG_IBAT5L	(CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT5U	(CFG_IMMRBAR | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */
+#define CFG_IBAT6L	(0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT6U	(0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
+
+#define CFG_IBAT7L	0
+#define CFG_IBAT7U	0
+
+#define CFG_DBAT0L	CFG_IBAT0L
+#define CFG_DBAT0U	CFG_IBAT0U
+#define CFG_DBAT1L	CFG_IBAT1L
+#define CFG_DBAT1U	CFG_IBAT1U
+#define CFG_DBAT2L	CFG_IBAT2L
+#define CFG_DBAT2U	CFG_IBAT2U
+#define CFG_DBAT3L	CFG_IBAT3L
+#define CFG_DBAT3U	CFG_IBAT3U
+#define CFG_DBAT4L	CFG_IBAT4L
+#define CFG_DBAT4U	CFG_IBAT4U
+#define CFG_DBAT5L	CFG_IBAT5L
+#define CFG_DBAT5U	CFG_IBAT5U
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02	/* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#ifdef CONFIG_MPC83XX_TSEC1
+#define CONFIG_ETHADDR		00:E0:0C:00:8C:01
+#endif
+
+#ifdef CONFIG_MPC83XX_TSEC2
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR		00:E0:0C:00:8C:02
+#endif
+
+#define CONFIG_IPADDR		10.82.19.159
+#define CONFIG_SERVERIP		10.82.48.106
+#define CONFIG_GATEWAYIP	10.82.19.254
+#define CONFIG_NETMASK		255.255.252.0
+
+
+#define CONFIG_HOSTNAME		mpc8349emitx
+#define CONFIG_ROOTPATH		/nfsroot0/u/timur/itx-ltib/rootfs
+#define CONFIG_BOOTFILE		timur/uImage
+
+#define CONFIG_UBOOTPATH	timur/u-boot.bin
+#define CONFIG_UBOOTSTART	fe700000
+#define CONFIG_UBOOTEND		fe77ffff
+
+#define CONFIG_LOADADDR		200000	/* default location for tftp and bootm */
+
+#define CONFIG_BAUDRATE	 	115200
+
+#undef CONFIG_BOOTCOMMAND
+#ifdef CONFIG_BOOTCOMMAND
+#define CONFIG_BOOTDELAY	6
+#else
+#define CONFIG_BOOTDELAY	-1	/* -1 disables auto-boot */
+#endif
+
+#define CONFIG_BOOTARGS \
+	"root=/dev/nfs rw nfsroot=$serverip:$rootpath " \
+	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+	"console=ttyS0,$baudrate $othbootargs"
+
+#define XMK_STR(x)	#x
+#define MK_STR(x)	XMK_STR(x)
+
+#define	CONFIG_EXTRA_ENV_SETTINGS \
+	"netdev=eth0\0" \
+	"tftpflash=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \
+		"erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \
+		"cp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize; " \
+		"cmp.b $loadaddr " MK_STR(CONFIG_UBOOTSTART) " $filesize\0" \
+	"tftpupdate=tftpboot $loadaddr " MK_STR(CONFIG_UBOOTPATH) "; " \
+		"protect off FEF00000 FEF7FFFF; " \
+		"erase FEF00000 FEF7FFFF; " \
+		"cp.b $loadaddr FEF00000 $filesize; " \
+		"protect on FEF00000 FEF7FFFF; " \
+		"cmp.b $loadaddr FEF00000 $filesize\0" \
+	"tftplinux=tftpboot $loadaddr $bootfile; bootm\0" \
+	"copyuboot=erase " MK_STR(CONFIG_UBOOTSTART) " " MK_STR(CONFIG_UBOOTEND) "; " \
+		"cp.b fef00000 " MK_STR(CONFIG_UBOOTSTART) " 80000\0"
+
+
+#undef MK_STR
+#undef XMK_STR
+
+#endif
-- 
1.4.2





More information about the U-Boot mailing list