[U-Boot-Users] PPC440 and CONFIG_BOOKE

[Stefan Roese]

Hi Jeff,

On Sunday 24 September 2006 18:34, Jeff Mock wrote:
> I'm porting u-boot to a new piece of hardware using a 440GX processor.
> My hardware looks a little bit like an Ocotea board so I'm using this as
> my starting point.

OK.

> The Ocotea configuration (and the other PPC4xx boards) doesn't define
> CONFIG_BOOKE in the config file.  The 440GX is a Book-E processor, this
> appears to define some of the SPRNs incorrectly.
>
> Is this done intentionally?

The first 440 U-Boot ports (including Ocotea) where done, long before the 
CONFIG_BOOKE define was added to U-Boot. All needed SPRN's should be defined 
in include/ppc440.h.

Please let me know, if you spot a problem with any PPC4xx register 
definitions.

Best regards,
Stefan