[U-Boot-Users] Compiling u-boot for AMCC yosemite board

[Föll, Tobias]

Hi,

A small question:

Why have you switched from AMCC 440EP to the Freescale 8349E ?


Regrads

Tobias 

-----Ursprüngliche Nachricht-----
Von: David Hawkins [mailto:dwh at ovro.caltech.edu] 
Gesendet: Freitag, 22. September 2006 17:41
An: Föll, Tobias
Cc: u-boot-users at lists.sourceforge.net
Betreff: Re: [U-Boot-Users] Compiling u-boot for AMCC yosemite board

Föll wrote:
> 
> Hi,
> 
> I will compile the uboot source for AMCC (440EP) yosemite board.
> 
> Is there a description how to do this ?
> I use gnu compiler with cygwin.
> Which is the relevant makefile ?
> 

Here's my test notes for the Yosemite board

http://www.ovro.caltech.edu/~dwh/powerpc_440ep.pdf

I didn't end up using the 440EP, instead selected the MPC8349E as the processor for my project, but these notes will get you started.

My MPC8349E notes have more details on obtaining and building U-boot from the git sources

http://www.ovro.caltech.edu/~dwh/powerpc_mpc8349e.pdf

But as other posters have noted, please read the DULG for the board.

Regards
Dave