[U-Boot-Users] Atmel ATNGW100 config file anyone?

[Ulf Samuelsson]

> Greetings
> 
> The subject says it all really!!
> 
> I've applied the u-boot-1.1.6-hs1.patch from avrforums to git head (no 
> errors, just a couple of offset & fuzzy matches) so I'm hoping to be 
> able to build a u-boot image with networking for the new avr32 demo board.
> 
> The board is on order but I don't know what to expect by way of 
> pre-loaded firmware - especially what capabilities it will have.
> 

You will get a board with U-Boot / Linux / Root filesystem
but all the S/W is inside the AVR32 BSP 2.0
which is downloadable from www.atmel.com (or soon will be)
There is no CD included in the kit.

I think that the BSP should contain the needed config file.

> Any pointers gratefully received:-)
> 
> -- 
> Robin
> 


Best Regards
Ulf Samuelsson                ulf at atmel.com
Atmel Nordic AB
Mail:  Box 2033, 174 02 Sundbyberg, Sweden
Visit:  Kavallerivägen 24, 174 58 Sundbyberg, Sweden
Phone +46 (8) 441 54 22     Fax +46 (8) 441 54 29
GSM    +46 (706) 22 44 57

Technical support when I am not available:
AT90 AVR Applications Group: mailto:avr at atmel.com
AT91 ARM Applications Group: mailto:at91support at atmel.com
AVR32 Applications Group        mailto:avr32 at atmel.com
http://www.avrfreaks.net/;            http://avr32linux.org/
http://www.at91.com/ ;                ftp://at91dist:distrib@81.80.104.162/