[U-Boot-Users] Problem Building U-Boot 1.1.5

[Diego Fons]

Hi,

I'm trying to build a U-Boot version from Ronetix to run in
AT91SAM9261 (Ronetix pm9261) with my own toolchain which includes
linux headers 2.16.12, uClibc 0.9.28.3, binutils 2.16.1 and GCC 3.4.6.
The problem is I get errors during building:

make[1]: Entering directory `/home/dfons/u-boot-1.1.5-ronetix/examples'
cc1: error: invalid option `fpu=fpa'
cc1: error: invalid option `abi=apcs-gnu'
hello_world.c:0: error: bad value (arm926ej-s) for -mtune= switch

I've no idea what it could be :(

The Ronetix README says:

If you have pre-built GCC ARM toolchain you can skip steps 1 and 2.

1. Required packages for building the u-boot-1.1.5-ronetix
binutils-2.17.50.0.6
gcc-4.1.1
newlib-1.14.0
insight-6.5

But i have my toolchain (no with this versions) so i skept steps 1 (and 2).

ideas? suggestions?

Regards,
Diego A. Fons.

-- 
+-----------------------------------------------------------+
E9C6C265 / 8D70 4A80 C337 DC0E 384A  6505 767B 11C2 E9C6 C265
+-----------------------------------------------------------+
"In the game of chess, you can never let your adversary see your pieces."
     -- Zapp Brannigan.