[U-Boot-Users] [PATCH 1/7] mpc83xx: Add register definitions for MPC831x.
Scott Wood
scottwood at freescale.com
Mon Apr 16 21:31:55 CEST 2007
Signed-off-by: Scott Wood <scottwood at freescale.com>
---
include/asm-ppc/immap_83xx.h | 56 +++++++++-
include/mpc83xx.h | 252 +++++++++++++++++++++++++++++++++++++++++-
2 files changed, 301 insertions(+), 7 deletions(-)
diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h
index 5e088d6..0de9338 100644
--- a/include/asm-ppc/immap_83xx.h
+++ b/include/asm-ppc/immap_83xx.h
@@ -206,7 +206,9 @@ typedef struct pmc83xx {
u32 pmccr; /* PMC Configuration Register */
u32 pmcer; /* PMC Event Register */
u32 pmcmr; /* PMC Mask Register */
- u8 res0[0xF4];
+ u32 pmccr1; /* PMC Configuration Register 1 */
+ u32 pmccr2; /* PMC Configuration Register 2 */
+ u8 res0[0xEC];
} pmc83xx_t;
/*
@@ -355,7 +357,8 @@ typedef struct lbus83xx {
u8 res2[0x8];
u32 mrtpr; /* Memory Refresh Timer Prescaler Register */
u32 mdr; /* UPM Data Register */
- u8 res3[0x8];
+ u8 res3[0x4];
+ u32 lsor; /* Special Operation Initiation Register */
u32 lsdmr; /* SDRAM Mode Register */
u8 res4[0x8];
u32 lurt; /* UPM Refresh Timer */
@@ -369,8 +372,14 @@ typedef struct lbus83xx {
u8 res6[0xC];
u32 lbcr; /* Configuration Register */
u32 lcrr; /* Clock Ratio Register */
- u8 res7[0x28];
- u8 res8[0xF00];
+ u8 res7[0x8];
+ u32 fmr; /* Flash Mode Register */
+ u32 fir; /* Flash Instruction Register */
+ u32 fcr; /* Flash Command Register */
+ u32 fbar; /* Flash Block Addr Register */
+ u32 fpar; /* Flash Page Addr Register */
+ u32 fbcr; /* Flash Byte Count Register */
+ u8 res8[0xF08];
} lbus83xx_t;
/*
@@ -527,7 +536,7 @@ typedef struct pcictrl83xx {
* USB
*/
typedef struct usb83xx {
- u8 fixme[0x2000];
+ u8 fixme[0x1000];
} usb83xx_t;
/*
@@ -574,7 +583,42 @@ typedef struct immap {
ios83xx_t ios; /* Sequencer */
pcictrl83xx_t pci_ctrl[2]; /* PCI Controller Control and Status Registers */
u8 res5[0x19900];
- usb83xx_t usb;
+ usb83xx_t usb[2];
+ tsec83xx_t tsec[2];
+ u8 res6[0xA000];
+ security83xx_t security;
+ u8 res7[0xC0000];
+} immap_t;
+
+#elif defined(CONFIG_MPC831X)
+typedef struct immap {
+ sysconf83xx_t sysconf; /* System configuration */
+ wdt83xx_t wdt; /* Watch Dog Timer (WDT) Registers */
+ rtclk83xx_t rtc; /* Real Time Clock Module Registers */
+ rtclk83xx_t pit; /* Periodic Interval Timer */
+ gtm83xx_t gtm[2]; /* Global Timers Module */
+ ipic83xx_t ipic; /* Integrated Programmable Interrupt Controller */
+ arbiter83xx_t arbiter; /* System Arbiter Registers */
+ reset83xx_t reset; /* Reset Module */
+ clk83xx_t clk; /* System Clock Module */
+ pmc83xx_t pmc; /* Power Management Control Module */
+ gpio83xx_t gpio[1]; /* General purpose I/O module */
+ u8 res0[0x1300];
+ ddr83xx_t ddr; /* DDR Memory Controller Memory */
+ fsl_i2c_t i2c[2]; /* I2C Controllers */
+ u8 res1[0x1300];
+ duart83xx_t duart[2]; /* DUART */
+ u8 res2[0x900];
+ lbus83xx_t lbus; /* Local Bus Controller Registers */
+ u8 res3[0x1000];
+ spi83xx_t spi; /* Serial Peripheral Interface */
+ dma83xx_t dma; /* DMA */
+ pciconf83xx_t pci_conf[1]; /* PCI Software Configuration Registers */
+ u8 res4[0x80];
+ ios83xx_t ios; /* Sequencer */
+ pcictrl83xx_t pci_ctrl[1]; /* PCI Controller Control and Status Registers */
+ u8 res5[0x1aa00];
+ usb83xx_t usb[1];
tsec83xx_t tsec[2];
u8 res6[0xA000];
security83xx_t security;
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index c2a4ff5..16b6c62 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -95,6 +95,11 @@
#define SPR_8321E_REV11 0x80660011
#define SPR_8321_REV11 0x80670011
+#define SPR_8311_REV10 0x80B30010
+#define SPR_8311E_REV10 0x80B20010
+#define SPR_8313_REV10 0x80B10010
+#define SPR_8313E_REV10 0x80B00010
+
/* SPCR - System Priority Configuration Register
*/
#define SPCR_PCIHPE 0x10000000 /* PCI Highest Priority Enable */
@@ -121,6 +126,15 @@
#define SPCR_TSEC2BDP_SHIFT (31-29)
#define SPCR_TSEC2EP 0x00000003 /* TSEC2 emergency priority */
#define SPCR_TSEC2EP_SHIFT (31-31)
+
+#elif defined(CONFIG_MPC831X)
+/* SPCR bits - MPC831x specific */
+#define SPCR_TSECDP 0x00003000 /* TSEC data priority */
+#define SPCR_TSECDP_SHIFT (31-19)
+#define SPCR_TSECEP 0x00000C00 /* TSEC emergency priority */
+#define SPCR_TSECEP_SHIFT (31-21)
+#define SPCR_TSECBDP 0x00000300 /* TSEC buffer descriptor priority */
+#define SPCR_TSECBDP_SHIFT (31-23)
#endif
/* SICRL/H - System I/O Configuration Register Low/High
@@ -195,6 +209,36 @@
#define SICRL_PCI_MSRC 0x10000000
#define SICRL_URT_CTPR 0x06000000
#define SICRL_IRQ_CTPR 0x00C00000
+
+#elif defined(CONFIG_MPC831X)
+/* SICRL bits - MPC831x specific */
+#define SICRL_LBC 0x30000000
+#define SICRL_UART 0x0C000000
+#define SICRL_SPI_A 0x03000000
+#define SICRL_SPI_B 0x00C00000
+#define SICRL_SPI_C 0x00300000
+#define SICRL_SPI_D 0x000C0000
+#define SICRL_USBDR 0x00000C00
+#define SICRL_ETSEC1_A 0x0000000C
+#define SICRL_ETSEC2_A 0x00000003
+
+/* SICRH bits - MPC831x specific */
+#define SICRH_INTR_A 0x02000000
+#define SICRH_INTR_B 0x00C00000
+#define SICRH_IIC 0x00300000
+#define SICRH_ETSEC2_B 0x000C0000
+#define SICRH_ETSEC2_C 0x00030000
+#define SICRH_ETSEC2_D 0x0000C000
+#define SICRH_ETSEC2_E 0x00003000
+#define SICRH_ETSEC2_F 0x00000C00
+#define SICRH_ETSEC2_G 0x00000300
+#define SICRH_ETSEC1_B 0x00000080
+#define SICRH_ETSEC1_C 0x00000060
+#define SICRH_GTX1_DLY 0x00000008
+#define SICRH_GTX2_DLY 0x00000004
+#define SICRH_TSOBI1 0x00000002
+#define SICRH_TSOBI2 0x00000001
+
#endif
/* SWCRR - System Watchdog Control Register
@@ -393,6 +437,28 @@
#define HRCWH_ROM_LOC_LOCAL_16BIT 0x00600000
#define HRCWH_ROM_LOC_LOCAL_32BIT 0x00700000
+#if defined(CONFIG_MPC831X)
+#define HRCWH_ROM_LOC_NAND_SP_8BIT 0x00100000
+#define HRCWH_ROM_LOC_NAND_SP_16BIT 0x00200000
+#define HRCWH_ROM_LOC_NAND_LP_8BIT 0x00500000
+#define HRCWH_ROM_LOC_NAND_LP_16BIT 0x00600000
+
+#define HRCWH_RL_EXT_LEGACY 0x00000000
+#define HRCWH_RL_EXT_NAND 0x00040000
+
+#define HRCWH_TSEC1M_IN_MII 0x00000000
+#define HRCWH_TSEC1M_IN_RMII 0x00002000
+#define HRCWH_TSEC1M_IN_RGMII 0x00006000
+#define HRCWH_TSEC1M_IN_RTBI 0x0000A000
+#define HRCWH_TSEC1M_IN_SGMII 0x0000C000
+
+#define HRCWH_TSEC2M_IN_MII 0x00000000
+#define HRCWH_TSEC2M_IN_RMII 0x00000400
+#define HRCWH_TSEC2M_IN_RGMII 0x00000C00
+#define HRCWH_TSEC2M_IN_RTBI 0x00001400
+#define HRCWH_TSEC2M_IN_SGMII 0x00001800
+#endif
+
#if defined(CONFIG_MPC834X)
#define HRCWH_TSEC1M_IN_RGMII 0x00000000
#define HRCWH_TSEC1M_IN_RTBI 0x00004000
@@ -523,6 +589,18 @@
#define SCCR_TSEC2CM_1 0x10000000
#define SCCR_TSEC2CM_2 0x20000000
#define SCCR_TSEC2CM_3 0x30000000
+
+#elif defined(CONFIG_MPC831X)
+/* TSEC1 bits are for TSEC2 as well */
+#define SCCR_TSEC1CM 0xc0000000
+#define SCCR_TSEC1CM_SHIFT 30
+#define SCCR_TSEC1CM_1 0x40000000
+#define SCCR_TSEC1CM_2 0x80000000
+#define SCCR_TSEC1CM_3 0xC0000000
+
+#define SCCR_TSEC1ON 0x20000000
+#define SCCR_TSEC2ON 0x10000000
+
#endif
#define SCCR_USBMPHCM 0x00c00000
@@ -556,6 +634,25 @@
#define CSCONFIG_COL_BIT_10 0x00000002
#define CSCONFIG_COL_BIT_11 0x00000003
+/* TIMING_CFG_0 - DDR SDRAM Timing Configuration 0
+ */
+#define TIMING_CFG0_RWT 0xC0000000
+#define TIMING_CFG0_RWT_SHIFT 30
+#define TIMING_CFG0_WRT 0x30000000
+#define TIMING_CFG0_WRT_SHIFT 28
+#define TIMING_CFG0_RRT 0x0C000000
+#define TIMING_CFG0_RRT_SHIFT 26
+#define TIMING_CFG0_WWT 0x03000000
+#define TIMING_CFG0_WWT_SHIFT 24
+#define TIMING_CFG0_ACT_PD_EXIT 0x00700000
+#define TIMING_CFG0_ACT_PD_EXIT_SHIFT 20
+#define TIMING_CFG0_PRE_PD_EXIT 0x00070000
+#define TIMING_CFG0_PRE_PD_EXIT_SHIFT 16
+#define TIMING_CFG0_ODT_PD_EXIT 0x00000F00
+#define TIMING_CFG0_ODT_PD_EXIT_SHIFT 8
+#define TIMING_CFG0_MRS_CYC 0x00000F00
+#define TIMING_CFG0_MRS_CYC_SHIFT 0
+
/* TIMING_CFG_1 - DDR SDRAM Timing Configuration 1
*/
#define TIMING_CFG1_PRETOACT 0x70000000
@@ -586,6 +683,17 @@
#define TIMING_CFG2_WR_DATA_DELAY_SHIFT 10
#define TIMING_CFG2_CPO_DEF 0x00000000 /* default (= CASLAT + 1) */
+#define TIMING_CFG2_ADD_LAT 0x70000000
+#define TIMING_CFG2_ADD_LAT_SHIFT 28
+#define TIMING_CFG2_WR_LAT_DELAY 0x00380000
+#define TIMING_CFG2_WR_LAT_DELAY_SHIFT 19
+#define TIMING_CFG2_RD_TO_PRE 0x0000E000
+#define TIMING_CFG2_RD_TO_PRE_SHIFT 13
+#define TIMING_CFG2_CKE_PLS 0x000001C0
+#define TIMING_CFG2_CKE_PLS_SHIFT 6
+#define TIMING_CFG2_FOUR_ACT 0x0000003F
+#define TIMING_CFG2_FOUR_ACT_SHIFT 0
+
/* DDR_SDRAM_CFG - DDR SDRAM Control Configuration
*/
#define SDRAM_CFG_MEM_EN 0x80000000
@@ -593,13 +701,14 @@
#define SDRAM_CFG_ECC_EN 0x20000000
#define SDRAM_CFG_RD_EN 0x10000000
#define SDRAM_CFG_SDRAM_TYPE 0x03000000
+#define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000
#define SDRAM_CFG_SDRAM_TYPE_SHIFT 24
#define SDRAM_CFG_DYN_PWR 0x00200000
#define SDRAM_CFG_32_BE 0x00080000
#define SDRAM_CFG_8_BE 0x00040000
#define SDRAM_CFG_NCAP 0x00020000
#define SDRAM_CFG_2T_EN 0x00008000
-#define SDRAM_CFG_SDRAM_TYPE_DDR 0x02000000
+#define SDRAM_CFG_BI 0x00000001
/* DDR_SDRAM_MODE - DDR SDRAM Mode Register
*/
@@ -732,11 +841,15 @@
#define BR_PS_32 0x00001800 /* Port Size 32 bit */
#define BR_DECC 0x00000600
#define BR_DECC_SHIFT 9
+#define BR_DECC_OFF 0x00000000
+#define BR_DECC_CHK 0x00000200
+#define BR_DECC_CHK_GEN 0x00000400
#define BR_WP 0x00000100
#define BR_WP_SHIFT 8
#define BR_MSEL 0x000000E0
#define BR_MSEL_SHIFT 5
#define BR_MS_GPCM 0x00000000 /* GPCM */
+#define BR_MS_FCM 0x00000020 /* FCM */
#define BR_MS_SDRAM 0x00000060 /* SDRAM */
#define BR_MS_UPMA 0x00000080 /* UPMA */
#define BR_MS_UPMB 0x000000A0 /* UPMB */
@@ -803,6 +916,34 @@
#define OR_GPCM_EAD 0x00000001
#define OR_GPCM_EAD_SHIFT 0
+#define OR_FCM_AM 0xFFFF8000
+#define OR_FCM_AM_SHIFT 15
+#define OR_FCM_BCTLD 0x00001000
+#define OR_FCM_BCTLD_SHIFT 12
+#define OR_FCM_PGS 0x00000400
+#define OR_FCM_PGS_SHIFT 10
+#define OR_FCM_CSCT 0x00000200
+#define OR_FCM_CSCT_SHIFT 9
+#define OR_FCM_CST 0x00000100
+#define OR_FCM_CST_SHIFT 8
+#define OR_FCM_CHT 0x00000080
+#define OR_FCM_CHT_SHIFT 7
+#define OR_FCM_SCY 0x00000070
+#define OR_FCM_SCY_SHIFT 4
+#define OR_FCM_SCY_1 0x00000010
+#define OR_FCM_SCY_2 0x00000020
+#define OR_FCM_SCY_3 0x00000030
+#define OR_FCM_SCY_4 0x00000040
+#define OR_FCM_SCY_5 0x00000050
+#define OR_FCM_SCY_6 0x00000060
+#define OR_FCM_SCY_7 0x00000070
+#define OR_FCM_RST 0x00000008
+#define OR_FCM_RST_SHIFT 3
+#define OR_FCM_TRLX 0x00000004
+#define OR_FCM_TRLX_SHIFT 2
+#define OR_FCM_EHTR 0x00000002
+#define OR_FCM_EHTR_SHIFT 1
+
#define OR_UPM_AM 0xFFFF8000
#define OR_UPM_AM_SHIFT 15
#define OR_UPM_XAM 0x00006000
@@ -1019,4 +1160,113 @@
#define PIWAR_IWS_1G 0x0000001D
#define PIWAR_IWS_2G 0x0000001E
+/* PMCCR1 - PCI Configuration Register 1
+ */
+#define PMCCR1_POWER_OFF 0x00000020
+
+/* FMR - Flash Mode Register
+ */
+#define FMR_CWTO 0x0000F000
+#define FMR_CWTO_SHIFT 12
+#define FMR_BOOT 0x00000800
+#define FMR_ECCM 0x00000100
+#define FMR_AL 0x00000030
+#define FMR_AL_SHIFT 4
+#define FMR_OP 0x00000003
+#define FMR_OP_SHIFT 0
+
+/* FIR - Flash Instruction Register
+ */
+#define FIR_OP0 0xF0000000
+#define FIR_OP0_SHIFT 28
+#define FIR_OP1 0x0F000000
+#define FIR_OP1_SHIFT 24
+#define FIR_OP2 0x00F00000
+#define FIR_OP2_SHIFT 20
+#define FIR_OP3 0x000F0000
+#define FIR_OP3_SHIFT 16
+#define FIR_OP4 0x0000F000
+#define FIR_OP4_SHIFT 12
+#define FIR_OP5 0x00000F00
+#define FIR_OP5_SHIFT 8
+#define FIR_OP6 0x000000F0
+#define FIR_OP6_SHIFT 4
+#define FIR_OP7 0x0000000F
+#define FIR_OP7_SHIFT 0
+#define FIR_OP_NOP 0x0 /* No operation and end of sequence */
+#define FIR_OP_CA 0x1 /* Issue current column address */
+#define FIR_OP_PA 0x2 /* Issue current block+page address */
+#define FIR_OP_UA 0x3 /* Issue user defined address */
+#define FIR_OP_CM0 0x4 /* Issue command from FCR[CMD0] */
+#define FIR_OP_CM1 0x5 /* Issue command from FCR[CMD1] */
+#define FIR_OP_CM2 0x6 /* Issue command from FCR[CMD2] */
+#define FIR_OP_CM3 0x7 /* Issue command from FCR[CMD3] */
+#define FIR_OP_WB 0x8 /* Write FBCR bytes from FCM buffer */
+#define FIR_OP_WS 0x9 /* Write 1 or 2 bytes from MDR[AS] */
+#define FIR_OP_RB 0xA /* Read FBCR bytes to FCM buffer */
+#define FIR_OP_RS 0xB /* Read 1 or 2 bytes to MDR[AS] */
+#define FIR_OP_CW0 0xC /* Wait then issue FCR[CMD0] */
+#define FIR_OP_CW1 0xD /* Wait then issue FCR[CMD1] */
+#define FIR_OP_RBW 0xE /* Wait then read FBCR bytes */
+#define FIR_OP_RSW 0xF /* Wait then read 1 or 2 bytes */
+
+/* FCR - Flash Command Register
+ */
+#define FCR_CMD0 0xFF000000
+#define FCR_CMD0_SHIFT 24
+#define FCR_CMD1 0x00FF0000
+#define FCR_CMD1_SHIFT 16
+#define FCR_CMD2 0x0000FF00
+#define FCR_CMD2_SHIFT 8
+#define FCR_CMD3 0x000000FF
+#define FCR_CMD3_SHIFT 0
+
+/* FBAR - Flash Block Address Register
+ */
+#define FBAR_BLK 0x00FFFFFF
+
+/* FPAR - Flash Page Address Register
+ */
+#define FPAR_SP_PI 0x00007C00
+#define FPAR_SP_PI_SHIFT 10
+#define FPAR_SP_MS 0x00000200
+#define FPAR_SP_CI 0x000001FF
+#define FPAR_SP_CI_SHIFT 0
+#define FPAR_LP_PI 0x0003F000
+#define FPAR_LP_PI_SHIFT 12
+#define FPAR_LP_MS 0x00000800
+#define FPAR_LP_CI 0x000007FF
+#define FPAR_LP_CI_SHIFT 0
+
+/* LTESR - Transfer Error Status Register
+ */
+#define LTESR_BM 0x80000000
+#define LTESR_FCT 0x40000000
+#define LTESR_PAR 0x20000000
+#define LTESR_WP 0x04000000
+#define LTESR_ATMW 0x00800000
+#define LTESR_ATMR 0x00400000
+#define LTESR_CS 0x00080000
+#define LTESR_CC 0x00000001
+
+/* DDR Control Driver Register
+ */
+#define DDRCDR_EN 0x40000000
+#define DDRCDR_PZ 0x3C000000
+#define DDRCDR_PZ_MAXZ 0x00000000
+#define DDRCDR_PZ_HIZ 0x20000000
+#define DDRCDR_PZ_NOMZ 0x30000000
+#define DDRCDR_PZ_LOZ 0x38000000
+#define DDRCDR_PZ_MINZ 0x3C000000
+#define DDRCDR_NZ 0x3C000000
+#define DDRCDR_NZ_MAXZ 0x00000000
+#define DDRCDR_NZ_HIZ 0x02000000
+#define DDRCDR_NZ_NOMZ 0x03000000
+#define DDRCDR_NZ_LOZ 0x03800000
+#define DDRCDR_NZ_MINZ 0x03C00000
+#define DDRCDR_ODT 0x00080000
+#define DDRCDR_DDR_CFG 0x00040000
+#define DDRCDR_M_ODR 0x00000002
+#define DDRCDR_Q_DRN 0x00000001
+
#endif /* __MPC83XX_H__ */
--
1.5.0.3
More information about the U-Boot
mailing list