[U-Boot-Users] Testing todays u-boot-fdt

[Wolfgang Denk]

Hello,

in message <4627F709.8060502 at cideas.com> you wrote:
> 
> I found the technique in u-boot and thought BOARDLIBS was the approved 
> method.  Looks like it is a NAND thing.

I see.

> $ grep -r BOARDLIBS *
> board/prodrive/pdnb3/config.mk:BOARDLIBS = $(obj)cpu/ixp/npe/libnpe.a
> board/nc650/config.mk:BOARDLIBS = $(obj)drivers/nand/libnand.a
> board/ixdp425/config.mk:BOARDLIBS = $(obj)cpu/ixp/npe/libnpe.a
> board/mpc8360emds/config.mk:BOARDLIBS = libfdt/libfdt.a
> doc/README.nand:specific config.mk file should also have "BOARDLIBS =
> doc/README.nand:necessary, but the config.mk should have "BOARDLIBS =
> include/configs/delta.h:/* Use the new NAND code. (BOARDLIBS = 
> drivers/nand/libnand.a required) */
> include/configs/zylonite.h:/* Use the new NAND code. (BOARDLIBS = 
> drivers/nand/libnand.a required) */
> Makefile:LIBS += $(BOARDLIBS)

Thanks for pointing out. I will ask Stefan to clean this up.

Hi Stefan!


> Not a problem, I'll revert back to wg's Makefile change.

Thanks.

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH, HRB 165235 Munich, CEO: Wolfgang Denk
Office:  Kirchenstr. 5,       D-82194 Groebenzell,            Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Boykottiert Microsoft - Kauft Eure Fenster bei OBI!