[U-Boot-Users] Update for 5329

[Craig Day]

Hi TsiChung,

I've ported u-boot 1.1.6 over to the LPC3180 (arm926ejs core) and have
included NAND support.  The nand_write_ecc function in
drivers/nand/nand_base.c appears to be writing pages correctly, but the
pointer to the source data in memory for nand_verify_pages does not seem to
be updated correctly. Specifically, line 1707 in nand_base.c contains:
this->data_poi = bufstart; However, the problem is that bufstart is never
updated, and always points to the beginning of the data source, causing all
nand_page_verify calls to compare the newest written pages in NAND flash to
the beginning of the data source. After the first block NAND writing fails
due to nand_verify_pages failing. To fix this I added in:
bufstart += (1 << this->phys_erase_shift);

Have you seen this problem? Or has anyone else run into this problem? Or is
there something I'm missing?

cheers,
Craig

-----Original Message-----
From: u-boot-users-bounces at lists.sourceforge.net
[mailto:u-boot-users-bounces at lists.sourceforge.net] On Behalf Of Liew Tsi
Chung-r5aahp
Sent: Wednesday, August 01, 2007 9:13 AM
To: u-boot-users at lists.sourceforge.net
Cc: Stefan Roese; Wilson Callan
Subject: [U-Boot-Users] Update for 5329

Stefan,

Here is the updates:
1. Update-CONFIG_MCFUART.patch
2. Added-common-define-CONFIG_CF_MII-for-do_mii.patch
3. Moved-sync-from-m5329evb.c-to-include-asm-m68k-io.patch
4. Added-uart_gpio_conf-for-port-configuration.patch
5. Update-timer.patch
6. Added-fsl_i2c-header-file.patch
7. Added-NAND-Flash-support-and-I2C-support.patch
8. Added-GPIO-enabled-for-I2C-signals.patch

Note: NAND support still partially incomplete, unable to read/write.
Erase, bad, markbad, lock, unlock and info seems working.

Thanks,

Regards,
TsiChung