[U-Boot-Users] Booting Linux image

[raul.moreno at telvent.abengoa.com]

Hello,
I've ported the U-Boot to my own board. I am using a MPC866.
I compiled with the option of -DDEBUG, so I can see the debug messages. I
try to load an Linux kernel image, but after checking the image and
uncompresses it, the following message appears:
"Transferring control to Linux (at address 0x00000000)".
So I think U-Boot has already finished, hasn't it?
My problem is that after this message, the kernel hangs.
Moreover, it is supposed that the Linux kernel is uncompressed in the
address 0x00000000 (at least for PPC), but I do not see it there.
I am not sure if the problem is in my kernel image or in the U-Boot and
where.
Can anybody help me?

Thanks,

Raúl Moreno
***********Internet Email Confidentiality Footer*************
This email and any files transmitted with it are confidential and intended
solely for the use of the organization or individual to whom they are
addressed.  It is expressly forbidden to retransmit or copy email and/or
this  attached files without our permission .  If you are not the
addressee indicated in this message (or responsible for delivery of the
message to such person), you may not copy or deliver this message
to anyone. In such case, you should destroy this message and kindly
notify the sender by reply email. Please advise immediately if you or
your employer does not consent to Internet email for messages of this
kind.  Opinions, conclusions and other information in this message that
do not relate to the official business of my firm shall be understood as
neither given nor endorsed by it.