[U-Boot-Users] SPI command after I2C doesn't work

[DI BACCO ANTONIO - technolabs]

Hi,
 
I have one SPI device and one I2C device on a board with MPC880. 
 
Both the commands seem to work, but after the first access to I2C, the
SPI command doesn't work anymore and I have to give the "reset" command
to the u-boot.
 
Anyone has an hint?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070802/134b0cc1/attachment.htm