[U-Boot-Users] Can't boot uClinux image on mcf5329evb

[Aaron Sells]

Hi Bob,

Robert S. Grimes wrote:
 >     U-Boot 1.2.0 (Jul 26 2007 - 22:20:01)
 >
 >     CPU:   Freescale MCF5329 (Mask:54 Version:1)
 >            CPU CLK 240 Mhz BUS CLK 80 Mhz
 >     Board: Freescale FireEngine 5329 EVB
 >     DRAM:  16 MB
 >     FLASH:  2 MB
 >     In:    serial
 >     Out:   serial
 >     Err:   serial
 >     Net:   FEC0
 >     -> tftp 40020000 test.kernel.img
<snip>
 >     -> bootm 40020000
 >     ## Booting image at 40020000 ...
 >        Image Name:   uClinux test
 >        Created:      2007-08-06   0:59:09 UTC
 >        Image Type:   M68K Linux Kernel Image (uncompressed)
 >        Data Size:    3148804 Bytes =  3 MB
 >        Load Address: 40020000
 >        Entry Point:  40020000

The fact that you're downloading to and executing from the same address 
location may be your problem.  Try tftping your uClinux image to 
0x41020000.

Regards,
Aaron