[U-Boot-Users] [ARM] TI DaVinci support, hopefully final [0/5]

[ksi at koi8.net]

Here it is.

Changes:

- Fixed CONFIG_CMD_NET in net files.
- Fixed CONFIG_CMD_EEPROM for schmoogie.
- Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
   DV_EVM. Can't check if it works on SONATA, don't have a board any more,
   but it at least compiles.

I'm sending patches in two forms -- inline (set of 5 patches) _AND_ as a set
of 2 GZIP files. Those should survive _ANY_ reformatting by various MUAs.

Hopefully it is the final attempt...

Here is an excerpt from session log on SCHMOOGIE...

=== Cut ===
U-Boot 1.2.0-g6c33c785-dirty (Aug  7 2007 - 13:07:17)

DRAM:  128 MB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
ARM Clock : 297MHz
DDR Clock : 162MHz
ETH PHY   : DP83848 @ 0x01
U-Boot > iprobe
Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
U-Boot > ping 192.168.253.10
host 192.168.253.10 is alive
U-Boot > 
=== Cut ===

---
******************************************************************
*  KSI at home    KOI8 Net  < >  The impossible we do immediately.  *
*  Las Vegas   NV, USA   < >  Miracles require 24-hour notice.   *
******************************************************************