[U-Boot-Users] [PATCH 2/2] Add support for SBC8641D
Joe Hamman
joe.hamman at embeddedspecialties.com
Fri Aug 10 23:27:09 CEST 2007
Hi Jon,
> -----Original Message-----
> From: Jon Loeliger [mailto:jdl at freescale.com]
> Sent: Friday, August 10, 2007 2:58 PM
> To: joe.hamman at embeddedspecialties.com
> Cc: u-boot-users
> Subject: Re: [PATCH 2/2] Add support for SBC8641D
>
> On Thu, 2007-08-09 at 15:11, Joe Hamman wrote:
> > Add support for Wind River's SBC8641D reference board.
> >
> > Signed-off by: Joe Hamman <joe.hamman at embeddedspecialties.com>
>
>
> Joe,
>
> I have applied both of your SBC8641 patches to the -mpc86xx
> custodian tree now. Note, however, that they have been applied
> on top of the PCI rework patches that happened a bit earlier
> in our tree. As those patches have already been pulled upstream,
> we will need to do some minor re-work of your PCI initialization
> to make it work again.
>
> Just to make some progress here, I have applied your patches,
> but have _disabled_ the PCI with an "#undef PCI" in the config
> file for now. Doing this allows the board to build and MAKEALL
> to be happy. We'll call this progress.
Sounds good. PCI isn't a requirement for my customer, anyway.
>
> Please take a look at the mpc8641hpcn.c file for how it now
> sets up and calls fsl_pci_init() instead of pci_mpc86xx_init().
> I hope this is pretty clear and workable for you.
Will I find the new PCI code in the testing tree?
>
> When you have this working, I will apply it to the -mpc86xx
> custodian tree and request Wolfgang pull it! To that end,
> please try to get that to me before the close of this merge
> window on the 17th.
>
I'll get it in ASAP.
Best regards,
Joe
More information about the U-Boot
mailing list