[U-Boot-Users] 85xx CDS question
robert lazarski
robertlazarski at gmail.com
Mon Aug 20 23:35:06 CEST 2007
On 8/20/07, Andy Fleming <afleming at gmail.com> wrote:
> The 8548 CDS doesn't have PCI2 exposed. PCI1 is routed through the
> PCI edge connector. PCIe is routed through the slot on the opposite
> side of the card. There's no room for PCI2, so it's orphaned. On the
> 8555, PCI2 is routed to where the PCIe slot is on 8548.
>
> Suffice it to say, if you want to use PCI2 on 8548, you'll need to
> devise your own memory map. The PCI2_IO is probably left over from
> porting the CDS from the 8555/8541 to the 8548. I will look into
> cleaning up the comments in that file to reflect reality. :)
>
> Andy
>
Thanks Andy, as I don't have the mpc8548cds on hand. I can't find an
85xx example that has both PCIe and PCI2. What's confusing me is that
I'm seeing this mapping on the mpc8541cds:
* 0xa000_0000 0xbfff_ffff PCI2 MEM 512M
And in mpc8548cds:
* 0xa000_0000 0xbfff_ffff PCIe MEM 512M
Its legal on 85xx to define the same memory area for either PCI2 or
PCIe ? If so, here's my idea. I don't have RapidIO - can I do use the
memory map that mpc8548cds uses:
* 0xc000_0000 0xdfff_ffff RapidIO 512M
For my board as?
* 0xc000_0000 0xdfff_ffff PCI2 MEM 512M
Thanks for the help!
Robert
More information about the U-Boot
mailing list