[U-Boot-Users] Loading vxWorks by u-boot.

[Leonid]

Hi, Chris:

I did thing similar to yours:

vxargs=setenv bootargs emac(0,0)h=192.168.0.141 e=192.168.0.204 f=0x86
dcache on
vx_ld_addr=2000000
vxget=tftp ${vx_ld_addr} windriver/vxWorks
vxload=run vxargs vxget; bootvx ${vx_ld_addr}

Now I run vxload:

=> run vxload
ENET Speed is 100 Mbps - FULL duplex connection
Using ppc_4xx_eth0 device
TFTP from server 192.168.0.141; our IP address is 192.168.0.204
Filename 'windriver/vxWorks'.
Load address: 0x2000000
Loading:
#################################################################
 
#################################################################
 
#################################################################
 
#################################################################
 
#################################################################
 
#################################################################
         ##################################
done
Bytes transferred = 2169653 (211b35 hex)
## Ethernet MAC address not copied to NV RAM
Loading .text @ 0x00010000 (1412464 bytes)
Loading .data @ 0x00168d80 (146880 bytes)
Clearing .bss @ 0x0018cb40 (88848 bytes)
## Using bootline (@ 0x4200): emac(0,0)h=192.168.0.141 e=192.168.0.204
f=0x86 dcache on
## Starting vxWorks at 0x00010000 ...


This is it...

I have console running on 9600 8N1 (which as I figured defined in
vxWorks as well) and the very same vxWorks elf runs OK from bootrom.

Thanks, 

Leonid.
-----Original Message-----
From: Chris Fester [mailto:cfester at iphase.com] 
Sent: Wednesday, August 22, 2007 1:42 PM
To: Leonid
Cc: u-boot-users at lists.sourceforge.net
Subject: RE: [U-Boot-Users] Loading vxWorks by u-boot.

On Wed, 2007-08-22 at 13:12 -0700, Leonid wrote:
> Hi, Chris:
> 
> Could you please clarify what 8641D_74K_1 image was? vxWorks elf, 
> binary, or some combination of bootrom and kernel?

It was a vxWorks elf.  No bootrom.

Chris