[U-Boot-Users] BDI2000 problems flashing virgin custom 8548 board

[robert lazarski]

Hi all, here's what I got from the bdi2000 shell:

- TARGET: processing user reset request
- BDI asserts HRESET
- Reset JTAG controller passed
- JTAG exists check passed
- IDCODE  is 0x0003901D
- SVR     is 0x80390020
- PVR     is 0x80210020
- CCSRBAR is 0x0_ff700000
- BDI removes HRESET
- TARGET: Target PVR is 0x80210020
- TARGET: resetting target passed
atum8548>info
    Target CPU        : MPC85xx (e500v2 rev.2)
    Target state      : running
atum8548>era 0
# Writing to workspace failed
atum8548>erase 00000000
# Writing to workspace failed
atum8548>prog 0 /tftpboot/u-boot.bin
Programming /tftpboot/u-boot.bin , please wait ....
# Writing to workspace failed
atum8548>

This is of course probably due to my bdi2000 cfg file - I've annexed
it in this email. I've tried to keep the file bare bones though this
is my first time writing this config. I've got one flash bank, a 128MB
spansion S29GL01GP . Here's my flash #DEFINE's :

#define CFG_BOOT_BLOCK          0xf8000000      /* boot TLB block */
#define CFG_FLASH_BASE          CFG_BOOT_BLOCK  /* start of FLASH 128M */

#define CFG_BR0_PRELIM          0xf8001001

#define CFG_OR0_PRELIM          0xff806e65

#define CFG_FLASH_BANKS_LIST    {CFG_FLASH_BASE}
#define CFG_MAX_FLASH_BANKS     1               /* number of banks      */
#define CFG_MAX_FLASH_SECT      1024            /* sectors per device */
#undef  CFG_FLASH_CHECKSUM
#define CFG_FLASH_ERASE_TOUT    512000  /* Flash Erase Timeout (ms) */
#define CFG_FLASH_WRITE_TOUT    8000    /* Flash Write Timeout (ms) */

The hardware engineer I'm working with tells me our first challenge is
to write the u-boot.bin file to flash. Can any anyone please help?
Robert
-------------- next part --------------
A non-text attachment was scrubbed...
Name: atum8548.cfg
Type: application/octet-stream
Size: 4145 bytes
Desc: not available
Url : http://lists.denx.de/pipermail/u-boot/attachments/20070829/1a1f5f06/attachment.obj