[U-Boot-Users] [PATCH] CFI: synchronize command offsets with Linux CFI driver

Bartlomiej Sieka tur at semihalf.com
Tue Dec 11 13:59:57 CET 2007


Fixes non-working CFI Flash on the Inka4x0 board.

Signed-off-by: Bartlomiej Sieka <tur at semihalf.com>
---
This patch differs from what is being done by the Linux CFI driver in that it
uses 0x05 as the interface code for x16/x32 chips, per "Common Flash Memory
Interface Publication 100" dated December 1.

Tested on the following Flash chips:
x8 (interface 0x00) in 8 bit mode
x8/x16 (interface 0x02) in 8 bit mode
x8/x16 (interface 0x02) in 16 bit mode

The patch should be applied on top of commit
81b20ccc2d795ae9a1199db5a50ad9c28d1e4d22 in the u-boot-cfi-flash repo.

diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 66754cd..b748a9f 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -1231,9 +1231,26 @@ static int flash_detect_cfi (flash_info_t * info)
 					debug ("port %d bits chip %d bits\n",
 						info->portwidth << CFI_FLASH_SHIFT_WIDTH,
 						info->chipwidth << CFI_FLASH_SHIFT_WIDTH);
-					/* this probably only works if info->interface == FLASH_CFI_X8X16 */
-					info->addr_unlock1 = (info->portwidth == FLASH_CFI_8BIT) ? 0xAAA : 0x555;
-					info->addr_unlock2 = (info->portwidth == FLASH_CFI_8BIT) ? 0x555 : 0x2AA;
+
+					/* calculate command offsets as in the Linux driver */
+					info->addr_unlock1 = 0x555;
+					info->addr_unlock2 = 0x2aa;
+
+					/*
+					 * modify the unlock address if we are
+					 * in compatibility mode
+					 */
+					if (	/* x8/x16 in x8 mode */
+						((info->chipwidth == FLASH_CFI_BY8) &&
+							(info->interface == FLASH_CFI_X8X16)) ||
+						/* x16/x32 in x16 mode */
+						((info->chipwidth == FLASH_CFI_BY16) &&
+							(info->interface == FLASH_CFI_X16X32)))
+					{
+						info->addr_unlock1 = 0xaaa;
+						info->addr_unlock2 = 0x555;
+					}
+ 
 					info->name = "CFI conformant";
 					return 1;
 				}
diff --git a/include/flash.h b/include/flash.h
index 6e252cc..2ed1e20 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -80,6 +80,7 @@ typedef struct {
 #define FLASH_CFI_X8		0x00
 #define FLASH_CFI_X16		0x01
 #define FLASH_CFI_X8X16		0x02
+#define FLASH_CFI_X16X32	0x05
 
 /* convert between bit value and numeric value */
 #define CFI_FLASH_SHIFT_WIDTH	3




More information about the U-Boot mailing list