[U-Boot-Users] [PATCH] ARM: S3C24x0 SoC NAND controller support

[Harald Welte]

This patch adds NAND support to the S3C24x0 SoC code in u-boot

Signed-off-by: Harald Welte <laforge at openmoko.org>

Index: u-boot/cpu/arm920t/s3c24x0/Makefile
===================================================================
--- u-boot.orig/cpu/arm920t/s3c24x0/Makefile
+++ u-boot/cpu/arm920t/s3c24x0/Makefile
@@ -26,7 +26,7 @@
 LIB	= $(obj)lib$(SOC).a
 
 COBJS	= i2c.o interrupts.o serial.o speed.o \
-	  usb.o usb_ohci.o
+	  usb.o usb_ohci.o nand.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
Index: u-boot/cpu/arm920t/s3c24x0/nand.c
===================================================================
--- /dev/null
+++ u-boot/cpu/arm920t/s3c24x0/nand.c
@@ -0,0 +1,179 @@
+/*
+ * (C) Copyright 2006 OpenMoko, Inc.
+ * Author: Harald Welte <laforge at openmoko.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if 0
+#define DEBUGN	printf
+#else
+#define DEBUGN(x, args ...) {}
+#endif
+
+#if defined(CONFIG_CMD_NAND)
+#if !defined(CFG_NAND_LEGACY)
+
+#include <nand.h>
+#include <s3c2410.h>
+
+#define __REGb(x)	(*(volatile unsigned char *)(x))
+#define __REGi(x)	(*(volatile unsigned int *)(x))
+
+#define	NF_BASE		0x4e000000
+#define	NFCONF		__REGi(NF_BASE + 0x0)
+#define	NFCMD		__REGb(NF_BASE + 0x4)
+#define	NFADDR		__REGb(NF_BASE + 0x8)
+#define	NFDATA		__REGb(NF_BASE + 0xc)
+#define	NFSTAT		__REGb(NF_BASE + 0x10)
+#define NFECC0		__REGb(NF_BASE + 0x14)
+#define NFECC1		__REGb(NF_BASE + 0x15)
+#define NFECC2		__REGb(NF_BASE + 0x16)
+
+#define S3C2410_NFCONF_EN          (1<<15)
+#define S3C2410_NFCONF_512BYTE     (1<<14)
+#define S3C2410_NFCONF_4STEP       (1<<13)
+#define S3C2410_NFCONF_INITECC     (1<<12)
+#define S3C2410_NFCONF_nFCE        (1<<11)
+#define S3C2410_NFCONF_TACLS(x)    ((x)<<8)
+#define S3C2410_NFCONF_TWRPH0(x)   ((x)<<4)
+#define S3C2410_NFCONF_TWRPH1(x)   ((x)<<0)
+
+static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+	struct nand_chip *chip = mtd->priv;
+
+	DEBUGN("hwcontrol(): 0x%02x: ", cmd);
+
+	switch (cmd) {
+	case NAND_CTL_SETNCE:
+		NFCONF &= ~S3C2410_NFCONF_nFCE;
+		DEBUGN("NFCONF=0x%08x\n", NFCONF);
+		break;
+	case NAND_CTL_CLRNCE:
+		NFCONF |= S3C2410_NFCONF_nFCE;
+		DEBUGN("NFCONF=0x%08x\n", NFCONF);
+		break;
+	case NAND_CTL_SETALE:
+		chip->IO_ADDR_W = NF_BASE + 0x8;
+		DEBUGN("SETALE\n");
+		break;
+	case NAND_CTL_SETCLE:
+		chip->IO_ADDR_W = NF_BASE + 0x4;
+		DEBUGN("SETCLE\n");
+		break;
+	default:
+		chip->IO_ADDR_W = NF_BASE + 0xc;
+		break;
+	}
+	return;
+}
+
+static int s3c2410_dev_ready(struct mtd_info *mtd)
+{
+	DEBUGN("dev_ready\n");
+	return (NFSTAT & 0x01);
+}
+
+#ifdef CONFIG_S3C2410_NAND_HWECC
+void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+	DEBUGN("s3c2410_nand_enable_hwecc(%p, %d)\n", mtd ,mode);
+	NFCONF |= S3C2410_NFCONF_INITECC;
+}
+
+static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+				      u_char *ecc_code)
+{
+	ecc_code[0] = NFECC0;
+	ecc_code[1] = NFECC1;
+	ecc_code[2] = NFECC2;
+	DEBUGN("s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n",
+		mtd , ecc_code[0], ecc_code[1], ecc_code[2]);
+
+	return 0;
+}
+
+static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
+				     u_char *read_ecc, u_char *calc_ecc)
+{
+	if (read_ecc[0] == calc_ecc[0] &&
+	    read_ecc[1] == calc_ecc[1] &&
+	    read_ecc[2] == calc_ecc[2])
+	    	return 0;
+
+	printf("s3c2410_nand_correct_data: not implemented\n");
+	return -1;
+}
+#endif
+
+int board_nand_init(struct nand_chip *nand)
+{
+	u_int32_t cfg;
+	u_int8_t tacls, twrph0, twrph1;
+	S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+
+	DEBUGN("board_nand_init()\n");
+
+	clk_power->CLKCON |= (1 << 4);
+
+	/* initialize hardware */
+	twrph0 = 3; twrph1 = 0; tacls = 0;
+
+	cfg = S3C2410_NFCONF_EN;
+	cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
+	cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
+	cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
+
+	NFCONF = cfg;
+
+	/* initialize nand_chip data structure */
+	nand->IO_ADDR_R = nand->IO_ADDR_W = 0x4e00000c;
+
+	/* read_buf and write_buf are default */
+	/* read_byte and write_byte are default */
+
+	/* hwcontrol always must be implemented */
+	nand->hwcontrol = s3c2410_hwcontrol;
+
+	nand->dev_ready = s3c2410_dev_ready;
+
+#ifdef CONFIG_S3C2410_NAND_HWECC
+	nand->enable_hwecc = s3c2410_nand_enable_hwecc;
+	nand->calculate_ecc = s3c2410_nand_calculate_ecc;
+	nand->correct_data = s3c2410_nand_correct_data;
+	nand->eccmode = NAND_ECC_HW3_512;
+#else
+	nand->eccmode = NAND_ECC_SOFT;
+#endif
+
+#ifdef CONFIG_S3C2410_NAND_BBT
+	nand->options = NAND_USE_FLASH_BBT;
+#else
+	nand->options = 0;
+#endif
+
+	DEBUGN("end of nand_init\n");
+
+	return 0;
+}
+
+#else
+ #error "U-Boot legacy NAND support not available for S3C2410"
+#endif
+#endif
-- 
- Harald Welte <laforge at openmoko.org>          	        http://openmoko.org/
============================================================================
Software for the world's first truly open Free Software mobile phone