[U-Boot-Users] 4xx ethernet bringup

raj ubootimage at yahoo.co.in
Fri Dec 21 13:34:00 CET 2007


--- Stefan Roese <sr at denx.de> wrote:

> On Friday 21 December 2007, shami Allam wrote:
> > Thanks for the information. But I read some where
> that for the Lab testing
> > purpose that I can give the IP address!!!!!
> 
> Please don't mix up ethernet address (== MAC
> address) and IP address. Of 
> course you can set ip addresses (and should if you
> don't use dhcp/bootp). But 
> you have to configure valid ethernet addresses too.
> If you don't have an 
> ethernet address pool, you can use the
> "tools/gen_eth_addr" tool to create a 
> random valid eth address for testing.
> 
> > I am able to read the PHY 
> > inforamtion by command mii info 0x01<PHY Addr>.
> Following is the info....
> > => mii info 0x01
> > PHY_PHYIDR2 @ 0x1 = 0x5c90
> > PHY_PHYIDR[1,2] @ 0x1 = 0x20005c90
> > PHY_BMCR value is 0x2100
> > PHY 0x01: OUI = 0x80017, Model = 0x09, Rev = 0x00,
> 100baseT, FDX
> 
> And what does "mii info" show (without parameter)?

PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY_PHYIDR2 @ 0x17 = 0x5c90
PHY_PHYIDR[1,2] @ 0x17 = 0x20005c90
PHY_BMCR value is 0x2100
PHY 0x17: OUI = 0x80017, Model = 0x09, Rev = 0x00,
100baseT, FDX
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
PHY ID register 2 read failed
=>
> 
> What is the value of CONFIG_PHY_ADDR in your board
> config file?
#define CONFIG_PHY_ADDR		1/* PHY address*/
> 
> Best regards,
Regards,
Shami.

> 
>
=====================================================================
> DENX Software Engineering GmbH,     MD: Wolfgang
> Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194
> Groebenzell, Germany
> Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 
> Email: office at denx.de
>
=====================================================================
> 
>
-------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio
> 2005.
>
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> U-Boot-Users mailing list
> U-Boot-Users at lists.sourceforge.net
>
https://lists.sourceforge.net/lists/listinfo/u-boot-users
> 



      Download prohibited? No problem. CHAT from any
browser, without download. Go to http://in.messenger.yahoo.com/webmessengerpromo.php/


      Save all your chat conversations. Find them online at http://in.messenger.yahoo.com/webmessengerpromo.php





More information about the U-Boot mailing list