[U-Boot-Users] [PATCH 1/5 RESEND] Improve configuration of FPGA subsystem

Matthias Fuchs matthias.fuchs at esd-electronics.com
Thu Dec 27 17:12:34 CET 2007


This patch removes the FPGA subsystem configuration through
the CONFIG_FPGA bitmask configuration option.

See README for the new options:

	CONFIG_FPGA,
	CONFIG_FPGA_<vendor>,
	CONFIG_FPGA_<family>

Signed-off-by: Matthias Fuchs <matthias.fuchs at esd-electronics.com>
---
 README                      |   19 ++++++++++++++-----
 board/gen860t/fpga.c        |    2 +-
 board/gen860t/gen860t.c     |    2 +-
 common/ACEX1K.c             |    4 ++--
 common/altera.c             |   18 +++++++++---------
 common/cmd_fpga.c           |    2 +-
 common/cyclon2.c            |    4 ++--
 common/fpga.c               |   30 +++++++++++-------------------
 common/spartan2.c           |    2 +-
 common/spartan3.c           |    2 +-
 common/virtex2.c            |    2 +-
 common/xilinx.c             |   28 ++++++++++++++--------------
 include/configs/GEN860T.h   |    4 +++-
 include/configs/M54455EVB.h |    4 +++-
 include/configs/alpr.h      |    4 +++-
 include/xilinx.h            |    4 ++--
 16 files changed, 69 insertions(+), 62 deletions(-)

diff --git a/README b/README
index 3dad5fc..a33ced7 100644
--- a/README
+++ b/README
@@ -1379,14 +1379,23 @@ The following options need to be configured:
 		SPI configuration items (port pins to use, etc). For
 		an example, see include/configs/sacsng.h.
 
-- FPGA Support: CONFIG_FPGA_COUNT
+- FPGA Support: CONFIG_FPGA
 
-		Specify the number of FPGA devices to support.
+		Enables FPGA subsystem.
+
+		CONFIG_FPGA_<vendor>
+
+		Enables support for specific chip vendors.
+		(ALTERA, XILINX)
 
-		CONFIG_FPGA
+		CONFIG_FPGA_<family>
 
-		Used to specify the types of FPGA devices.  For example,
-		#define CONFIG_FPGA  CFG_XILINX_VIRTEX2
+		Enables support for FPGA family.
+		(SPARTAN2, SPARTAN3, VIRTEX2, CYCLONE2, ACEX1K, ACEX)
+
+		CONFIG_FPGA_COUNT
+
+		Specify the number of FPGA devices to support.
 
 		CFG_FPGA_PROG_FEEDBACK
 
diff --git a/board/gen860t/fpga.c b/board/gen860t/fpga.c
index 2ba7e0e..3816e52 100644
--- a/board/gen860t/fpga.c
+++ b/board/gen860t/fpga.c
@@ -34,7 +34,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if (CONFIG_FPGA)
+#if defined(CONFIG_FPGA)
 
 #if 0
 #define GEN860T_FPGA_DEBUG
diff --git a/board/gen860t/gen860t.c b/board/gen860t/gen860t.c
index d448f9f..73cc16d 100644
--- a/board/gen860t/gen860t.c
+++ b/board/gen860t/gen860t.c
@@ -254,7 +254,7 @@ int misc_init_r (void)
 	mii_init ();
 #endif
 
-#if (CONFIG_FPGA)
+#if defined(CONFIG_FPGA)
 	gen860t_init_fpga ();
 #endif
 	return 0;
diff --git a/common/ACEX1K.c b/common/ACEX1K.c
index 2a421e2..76dc166 100644
--- a/common/ACEX1K.c
+++ b/common/ACEX1K.c
@@ -28,7 +28,7 @@
 #include <common.h>		/* core U-Boot definitions */
 #include <ACEX1K.h>		/* ACEX device family */
 
-#if (CONFIG_FPGA & (CFG_ALTERA | CFG_ACEX1K))
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ALTERA) && defined(CONFIG_FPGA_ACEX1K)
 
 /* Define FPGA_DEBUG to get debug printf's */
 #ifdef	FPGA_DEBUG
@@ -363,4 +363,4 @@ static int ACEX1K_ps_reloc (Altera_desc * desc, ulong reloc_offset)
 
 }
 
-#endif /* (CONFIG_FPGA & (CFG_ALTERA | CFG_ACEX1K)) */
+#endif /* CONFIG_FPGA && CONFIG_FPGA_ALTERA && CONFIG_FPGA_ACEX1K */
diff --git a/common/altera.c b/common/altera.c
index 06e8a95..0df7bae 100644
--- a/common/altera.c
+++ b/common/altera.c
@@ -40,7 +40,7 @@
 #define PRINTF(fmt,args...)
 #endif
 
-#if (CONFIG_FPGA & CFG_FPGA_ALTERA)
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ALTERA)
 
 /* Local Static Functions */
 static int altera_validate (Altera_desc * desc, char *fn);
@@ -56,11 +56,11 @@ int altera_load( Altera_desc *desc, void *buf, size_t bsize )
 		switch (desc->family) {
 		case Altera_ACEX1K:
 		case Altera_CYC2:
-#if (CONFIG_FPGA & CFG_ACEX1K)
+#if defined(CONFIG_FPGA_ACEX1K)
 			PRINTF ("%s: Launching the ACEX1K Loader...\n",
 					__FUNCTION__);
 			ret_val = ACEX1K_load (desc, buf, bsize);
-#elif (CONFIG_FPGA & CFG_CYCLON2)
+#elif defined CONFIG_FPGA_CYCLON2
 			PRINTF ("%s: Launching the CYCLON II Loader...\n",
 					__FUNCTION__);
 			ret_val = CYC2_load (desc, buf, bsize);
@@ -88,7 +88,7 @@ int altera_dump( Altera_desc *desc, void *buf, size_t bsize )
 	} else {
 		switch (desc->family) {
 		case Altera_ACEX1K:
-#if (CONFIG_FPGA & CFG_ACEX)
+#if defined(CONFIG_FPGA_ACEX)
 			PRINTF ("%s: Launching the ACEX1K Reader...\n",
 					__FUNCTION__);
 			ret_val = ACEX1K_dump (desc, buf, bsize);
@@ -156,9 +156,9 @@ int altera_info( Altera_desc *desc )
 			switch (desc->family) {
 			case Altera_ACEX1K:
 			case Altera_CYC2:
-#if (CONFIG_FPGA & CFG_ACEX1K)
+#if defined(CONFIG_FPGA_ACEX1K)
 				ACEX1K_info (desc);
-#elif (CONFIG_FPGA & CFG_CYCLON2)
+#elif defined(CONFIG_FPGA_CYCLON2)
 				CYC2_info (desc);
 #else
 				/* just in case */
@@ -192,7 +192,7 @@ int altera_reloc( Altera_desc *desc, ulong reloc_offset)
 	} else {
 		switch (desc->family) {
 		case Altera_ACEX1K:
-#if (CONFIG_FPGA & CFG_ACEX1K)
+#if defined(CONFIG_FPGA_ACEX1K)
 			ret_val = ACEX1K_reloc (desc, reloc_offset);
 #else
 			printf ("%s: No support for ACEX devices.\n",
@@ -200,7 +200,7 @@ int altera_reloc( Altera_desc *desc, ulong reloc_offset)
 #endif
 			break;
 		case Altera_CYC2:
-#if (CONFIG_FPGA & CFG_CYCLON2)
+#if defined(CONFIG_FPGA_CYCLON2)
 			ret_val = CYC2_reloc (desc, reloc_offset);
 #else
 			printf ("%s: No support for CYCLON II devices.\n",
@@ -249,4 +249,4 @@ static int altera_validate (Altera_desc * desc, char *fn)
 
 /* ------------------------------------------------------------------------- */
 
-#endif /* CONFIG_FPGA & CFG_FPGA_ALTERA */
+#endif /* CONFIG_FPGA & CONFIG_FPGA_ALTERA */
diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c
index 377a692..fb24395 100644
--- a/common/cmd_fpga.c
+++ b/common/cmd_fpga.c
@@ -58,7 +58,7 @@ static int fpga_get_op (char *opstr);
 /* Convert bitstream data and load into the fpga */
 int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size)
 {
-#if (CONFIG_FPGA & CFG_FPGA_XILINX)
+#if defined(CONFIG_FPGA_XILINX)
 	unsigned int length;
 	unsigned char* swapdata;
 	unsigned int swapsize;
diff --git a/common/cyclon2.c b/common/cyclon2.c
index dce13b5..06f5e8a 100644
--- a/common/cyclon2.c
+++ b/common/cyclon2.c
@@ -27,7 +27,7 @@
 #include <altera.h>
 #include <ACEX1K.h>		/* ACEX device family */
 
-#if (CONFIG_FPGA & (CFG_ALTERA | CFG_CYCLON2))
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_ALTERA) && defined(CONFIG_FPGA_CYCLON2)
 
 /* Define FPGA_DEBUG to get debug printf's */
 #ifdef	FPGA_DEBUG
@@ -302,4 +302,4 @@ static int CYC2_ps_reloc (Altera_desc * desc, ulong reloc_offset)
 	return ret_val;
 }
 
-#endif /* (CONFIG_FPGA & (CFG_ALTERA | CFG_CYCLON2)) */
+#endif /* CONFIG_FPGA && CONFIG_FPGA_ALTERA && CONFIG_FPGA_CYCLON2 */
diff --git a/common/fpga.c b/common/fpga.c
index 2eff239..d8b6ae3 100644
--- a/common/fpga.c
+++ b/common/fpga.c
@@ -67,14 +67,11 @@ static int fpga_dev_info( int devnum );
 static void fpga_no_sup( char *fn, char *msg )
 {
 	if ( fn && msg ) {
-		printf( "%s: No support for %s.  CONFIG_FPGA defined as 0x%x.\n",
-				fn, msg, CONFIG_FPGA );
+		printf( "%s: No support for %s.\n", fn, msg);
 	} else if ( msg ) {
-		printf( "No support for %s. CONFIG_FPGA defined as 0x%x.\n",
-				msg, CONFIG_FPGA );
+		printf( "No support for %s.\n", msg);
 	} else {
-		printf( "No FPGA suport!  CONFIG_FPGA defined as 0x%x.\n",
-				CONFIG_FPGA );
+		printf( "No FPGA suport!\n");
 	}
 }
 
@@ -112,11 +109,6 @@ static __attribute__((__const__)) fpga_desc * __attribute__((__const__)) fpga_va
 		printf( "%s: Null buffer.\n", fn );
 		return (fpga_desc * const)NULL;
 	}
-	if ( !bsize ) {
-		printf( "%s: Null buffer size.\n", fn );
-		return (fpga_desc * const)NULL;
-	}
-
 	return desc;
 }
 
@@ -135,7 +127,7 @@ static int fpga_dev_info( int devnum )
 
 		switch ( desc->devtype ) {
 		case fpga_xilinx:
-#if CONFIG_FPGA & CFG_FPGA_XILINX
+#if defined(CONFIG_FPGA_XILINX)
 			printf( "Xilinx Device\nDescriptor @ 0x%p\n", desc );
 			ret_val = xilinx_info( desc->devdesc );
 #else
@@ -143,7 +135,7 @@ static int fpga_dev_info( int devnum )
 #endif
 			break;
 		case fpga_altera:
-#if CONFIG_FPGA & CFG_FPGA_ALTERA
+#if defined(CONFIG_FPGA_ALTERA)
 			printf( "Altera Device\nDescriptor @ 0x%p\n", desc );
 			ret_val = altera_info( desc->devdesc );
 #else
@@ -175,14 +167,14 @@ int fpga_reloc( fpga_type devtype, void *desc, ulong reloc_off )
 
 	switch ( devtype ) {
 	case fpga_xilinx:
-#if CONFIG_FPGA & CFG_FPGA_XILINX
+#if defined(CONFIG_FPGA_XILINX)
 		ret_val = xilinx_reloc( desc, reloc_off );
 #else
 		fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
 #endif
 		break;
 	case fpga_altera:
-#if CONFIG_FPGA & CFG_FPGA_ALTERA
+#if defined(CONFIG_FPGA_ALTERA)
 		ret_val = altera_reloc( desc, reloc_off );
 #else
 		fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
@@ -268,14 +260,14 @@ int fpga_load( int devnum, void *buf, size_t bsize )
 	if ( desc ) {
 		switch ( desc->devtype ) {
 		case fpga_xilinx:
-#if CONFIG_FPGA & CFG_FPGA_XILINX
+#if defined(CONFIG_FPGA_XILINX)
 			ret_val = xilinx_load( desc->devdesc, buf, bsize );
 #else
 			fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
 #endif
 			break;
 		case fpga_altera:
-#if CONFIG_FPGA & CFG_FPGA_ALTERA
+#if defined(CONFIG_FPGA_ALTERA)
 			ret_val = altera_load( desc->devdesc, buf, bsize );
 #else
 			fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
@@ -301,14 +293,14 @@ int fpga_dump( int devnum, void *buf, size_t bsize )
 	if ( desc ) {
 		switch ( desc->devtype ) {
 		case fpga_xilinx:
-#if CONFIG_FPGA & CFG_FPGA_XILINX
+#if defined(CONFIG_FPGA_XILINX)
 			ret_val = xilinx_dump( desc->devdesc, buf, bsize );
 #else
 			fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" );
 #endif
 			break;
 		case fpga_altera:
-#if CONFIG_FPGA & CFG_FPGA_ALTERA
+#if defined(CONFIG_FPGA_ALTERA)
 			ret_val = altera_dump( desc->devdesc, buf, bsize );
 #else
 			fpga_no_sup( (char *)__FUNCTION__, "Altera devices" );
diff --git a/common/spartan2.c b/common/spartan2.c
index 06550b9..457009f 100644
--- a/common/spartan2.c
+++ b/common/spartan2.c
@@ -25,7 +25,7 @@
 #include <common.h>		/* core U-Boot definitions */
 #include <spartan2.h>		/* Spartan-II device family */
 
-#if (CONFIG_FPGA & (CFG_XILINX | CFG_SPARTAN2))
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_SPARTAN2)
 
 /* Define FPGA_DEBUG to get debug printf's */
 #ifdef	FPGA_DEBUG
diff --git a/common/spartan3.c b/common/spartan3.c
index f7c4f8c..17379eb 100644
--- a/common/spartan3.c
+++ b/common/spartan3.c
@@ -30,7 +30,7 @@
 #include <common.h>		/* core U-Boot definitions */
 #include <spartan3.h>		/* Spartan-II device family */
 
-#if (CONFIG_FPGA & (CFG_XILINX | CFG_SPARTAN3))
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_SPARTAN3)
 
 /* Define FPGA_DEBUG to get debug printf's */
 #ifdef	FPGA_DEBUG
diff --git a/common/virtex2.c b/common/virtex2.c
index b5dc366..1283ff6 100644
--- a/common/virtex2.c
+++ b/common/virtex2.c
@@ -31,7 +31,7 @@
 #include <common.h>
 #include <virtex2.h>
 
-#if (CONFIG_FPGA & (CFG_XILINX | CFG_VIRTEX2))
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_VIRTEX2)
 
 #if 0
 #define FPGA_DEBUG
diff --git a/common/xilinx.c b/common/xilinx.c
index e03e78c..c898238 100644
--- a/common/xilinx.c
+++ b/common/xilinx.c
@@ -32,7 +32,7 @@
 #include <spartan2.h>
 #include <spartan3.h>
 
-#if (CONFIG_FPGA & CFG_FPGA_XILINX)
+#if defined(CONFIG_FPGA) && defined(CONFIG_FPGA_XILINX)
 
 #if 0
 #define FPGA_DEBUG
@@ -59,7 +59,7 @@ int xilinx_load (Xilinx_desc * desc, void *buf, size_t bsize)
 	} else
 		switch (desc->family) {
 		case Xilinx_Spartan2:
-#if (CONFIG_FPGA & CFG_SPARTAN2)
+#if defined(CONFIG_FPGA_SPARTAN2)
 			PRINTF ("%s: Launching the Spartan-II Loader...\n",
 					__FUNCTION__);
 			ret_val = Spartan2_load (desc, buf, bsize);
@@ -69,7 +69,7 @@ int xilinx_load (Xilinx_desc * desc, void *buf, size_t bsize)
 #endif
 			break;
 		case Xilinx_Spartan3:
-#if (CONFIG_FPGA & CFG_SPARTAN3)
+#if defined(CONFIG_FPGA_SPARTAN3)
 			PRINTF ("%s: Launching the Spartan-III Loader...\n",
 					__FUNCTION__);
 			ret_val = Spartan3_load (desc, buf, bsize);
@@ -79,7 +79,7 @@ int xilinx_load (Xilinx_desc * desc, void *buf, size_t bsize)
 #endif
 			break;
 		case Xilinx_Virtex2:
-#if (CONFIG_FPGA & CFG_VIRTEX2)
+#if defined(CONFIG_FPGA_VIRTEX2)
 			PRINTF ("%s: Launching the Virtex-II Loader...\n",
 					__FUNCTION__);
 			ret_val = Virtex2_load (desc, buf, bsize);
@@ -106,7 +106,7 @@ int xilinx_dump (Xilinx_desc * desc, void *buf, size_t bsize)
 	} else
 		switch (desc->family) {
 		case Xilinx_Spartan2:
-#if (CONFIG_FPGA & CFG_SPARTAN2)
+#if defined(CONFIG_FPGA_SPARTAN2)
 			PRINTF ("%s: Launching the Spartan-II Reader...\n",
 					__FUNCTION__);
 			ret_val = Spartan2_dump (desc, buf, bsize);
@@ -116,7 +116,7 @@ int xilinx_dump (Xilinx_desc * desc, void *buf, size_t bsize)
 #endif
 			break;
 		case Xilinx_Spartan3:
-#if (CONFIG_FPGA & CFG_SPARTAN3)
+#if defined(CONFIG_FPGA_SPARTAN3)
 			PRINTF ("%s: Launching the Spartan-III Reader...\n",
 					__FUNCTION__);
 			ret_val = Spartan3_dump (desc, buf, bsize);
@@ -126,7 +126,7 @@ int xilinx_dump (Xilinx_desc * desc, void *buf, size_t bsize)
 #endif
 			break;
 		case Xilinx_Virtex2:
-#if (CONFIG_FPGA & CFG_VIRTEX2)
+#if defined( CONFIG_FPGA_VIRTEX2)
 			PRINTF ("%s: Launching the Virtex-II Reader...\n",
 					__FUNCTION__);
 			ret_val = Virtex2_dump (desc, buf, bsize);
@@ -198,7 +198,7 @@ int xilinx_info (Xilinx_desc * desc)
 			printf ("Device Function Table @ 0x%p\n", desc->iface_fns);
 			switch (desc->family) {
 			case Xilinx_Spartan2:
-#if (CONFIG_FPGA & CFG_SPARTAN2)
+#if defined(CONFIG_FPGA_SPARTAN2)
 				Spartan2_info (desc);
 #else
 				/* just in case */
@@ -207,7 +207,7 @@ int xilinx_info (Xilinx_desc * desc)
 #endif
 				break;
 			case Xilinx_Spartan3:
-#if (CONFIG_FPGA & CFG_SPARTAN3)
+#if defined(CONFIG_FPGA_SPARTAN3)
 				Spartan3_info (desc);
 #else
 				/* just in case */
@@ -216,7 +216,7 @@ int xilinx_info (Xilinx_desc * desc)
 #endif
 				break;
 			case Xilinx_Virtex2:
-#if (CONFIG_FPGA & CFG_VIRTEX2)
+#if defined(CONFIG_FPGA_VIRTEX2)
 				Virtex2_info (desc);
 #else
 				/* just in case */
@@ -249,7 +249,7 @@ int xilinx_reloc (Xilinx_desc * desc, ulong reloc_offset)
 	} else
 		switch (desc->family) {
 		case Xilinx_Spartan2:
-#if (CONFIG_FPGA & CFG_SPARTAN2)
+#if defined(CONFIG_FPGA_SPARTAN2)
 			ret_val = Spartan2_reloc (desc, reloc_offset);
 #else
 			printf ("%s: No support for Spartan-II devices.\n",
@@ -257,7 +257,7 @@ int xilinx_reloc (Xilinx_desc * desc, ulong reloc_offset)
 #endif
 			break;
 		case Xilinx_Spartan3:
-#if (CONFIG_FPGA & CFG_SPARTAN3)
+#if defined(CONFIG_FPGA_SPARTAN3)
 			ret_val = Spartan3_reloc (desc, reloc_offset);
 #else
 			printf ("%s: No support for Spartan-III devices.\n",
@@ -265,7 +265,7 @@ int xilinx_reloc (Xilinx_desc * desc, ulong reloc_offset)
 #endif
 			break;
 		case Xilinx_Virtex2:
-#if (CONFIG_FPGA & CFG_VIRTEX2)
+#if defined(CONFIG_FPGA_VIRTEX2)
 			ret_val = Virtex2_reloc (desc, reloc_offset);
 #else
 			printf ("%s: No support for Virtex-II devices.\n",
@@ -308,4 +308,4 @@ static int xilinx_validate (Xilinx_desc * desc, char *fn)
 	return ret_val;
 }
 
-#endif							/* CONFIG_FPGA & CFG_FPGA_XILINX */
+#endif	/* CONFIG_FPGA && CONFIG_FPGA_XILINX */
diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index bfbf3a8..3eb3131 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -273,7 +273,9 @@
  * Virtex2 FPGA configuration support
  */
 #define CONFIG_FPGA_COUNT		1
-#define CONFIG_FPGA				CFG_XILINX_VIRTEX2
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_VIRTEX2
 #define CFG_FPGA_PROG_FEEDBACK
 
 
diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h
index db30958..35637f9 100644
--- a/include/configs/M54455EVB.h
+++ b/include/configs/M54455EVB.h
@@ -192,7 +192,9 @@
 
 /* FPGA - Spartan 2 */
 /* experiment
-#define CONFIG_FPGA		CFG_SPARTAN3
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_SPARTAN3
 #define CONFIG_FPGA_COUNT	1
 #define CFG_FPGA_PROG_FEEDBACK
 #define CFG_FPGA_CHECK_CTRLC
diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index aff9823..cfe08c8 100644
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -296,7 +296,9 @@
 /*-----------------------------------------------------------------------
  * FPGA stuff
  *-----------------------------------------------------------------------*/
-#define CONFIG_FPGA             CFG_ALTERA_CYCLON2
+#define CONFIG_FPGA
+#define CONFIG_FPGA_ALTERA
+#define CONFIG_FPGA_CYCLON2
 #define CFG_FPGA_CHECK_CTRLC
 #define CFG_FPGA_PROG_FEEDBACK
 #define CONFIG_FPGA_COUNT       1		/* Ich habe 2 ... aber in
diff --git a/include/xilinx.h b/include/xilinx.h
index 3704e1d..95ebe3d 100644
--- a/include/xilinx.h
+++ b/include/xilinx.h
@@ -31,11 +31,11 @@
  *********************************************************************/
 #define CFG_SPARTAN2 			CFG_FPGA_DEV( 0x1 )
 #define CFG_VIRTEX_E 			CFG_FPGA_DEV( 0x2 )
-#define CFG_VIRTEX2	 			CFG_FPGA_DEV( 0x4 )
+#define CFG_VIRTEX2			CFG_FPGA_DEV( 0x4 )
 #define CFG_SPARTAN3 			CFG_FPGA_DEV( 0x8 )
 #define CFG_XILINX_SPARTAN2 	(CFG_FPGA_XILINX | CFG_SPARTAN2)
 #define CFG_XILINX_VIRTEX_E 	(CFG_FPGA_XILINX | CFG_VIRTEX_E)
-#define CFG_XILINX_VIRTEX2	 	(CFG_FPGA_XILINX | CFG_VIRTEX2)
+#define CFG_XILINX_VIRTEX2	(CFG_FPGA_XILINX | CFG_VIRTEX2)
 #define CFG_XILINX_SPARTAN3 	(CFG_FPGA_XILINX | CFG_SPARTAN3)
 /* XXX - Add new models here */
 
-- 
1.5.3





More information about the U-Boot mailing list