[U-Boot-Users] I can't debug U-BOOT after relocation in ram

[Patrick URIE]

Hello,

 

I try to debug U-boot in flash with GDB version 6.5 + BDI 2000.

I have followed topic about RAM relocation from DENX web.

but when U-BOOT is relocated in Ram, I can’t stop it at board_init_r().

 

 

My custom Board configuration is:

 

Hardware :

---------------

-MPC875,

-64MB (Top address 0x4000000)

-2MB flash

 

Software :

---------------

U-BOOT 1.4.4 in flash at 0xFE000000

Relocation address (read in R5 register) is 0x3FB00000

DER register value is 0x2006000F

 

Thank you for your reply.

 

---------------------------------------
Urié Patrick
Software engineer
ReFLEX Custom Embedded Systems
6, rue du Velay - SILIC 1743 Lisses
91047 EVRY Cedex - FRANCE
Phone  : +33 (0) 169 870 255 (ext. 140)
Fax    : +33 (0) 164 972 859

---------------------------------------

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070205/d847c016/attachment.htm