[U-Boot-Users] BDI config file - MPC8360e issue
agnel juni
junijoseph at yahoo.co.in
Tue Feb 13 23:26:06 CET 2007
Hi:
I am working with a MPC8360EA MDS processor board with Rev2.0 silicon and DDR2 memory in it.
I need to program the flash with u-boot using BDI2000. I downloaded the BDI config gile from the following FTP site as susggested in the mailing list.
ftp://83.125.32.26/bdigdb/config/powerpc/mpc83xx/
I verified the DDR2 parameters from u-boot and it matches the configuration section of the BDI config file too.
The board has 32MB Spansion flash in it (S29GL256N). But when I connect the BDI to the board , BDI keeps resettingthe board with the following error.
/****************************************************************/
TARGET: Target PVR is 0x80830030
- TARGET: resetting target passed
- TARGET: processing target startup ....
- COP status is 0x01
- Target PVR is 0x80830030
- BDI tries to resynch TAP
- COP status is 0x21
- Target PVR is 0x00000000
*** TARGET: processing target startup failed
# PPC: timeout while waiting for freeze
- TARGET: target will be restarted in 10 sec
/**************************************************************/
Any suggestions to solve this issue would be appreciated.
Thanks
Junita
__________________________________________________________
Yahoo! India Answers: Share what you know. Learn something new
http://in.answers.yahoo.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070214/39bd8d95/attachment.htm
More information about the U-Boot
mailing list