[U-Boot-Users] [PATCH 2/4] Use config.h, not xparameters.h, for xilinx targets

[Grant Likely]

Change the xilinx device drivers and board code to include config.h
instead of xparameters.h directly.  config.h always includes the
correct xparameters file.  This change reduces the posibility of
including the wrong file when adding a new xilinx board port

Signed-off-by: Grant Likely <grant.likely at secretlab.ca>
---
 board/xilinx/ml300/Makefile             |    2 +-
 board/xilinx/ml300/ml300.c              |    2 +-
 board/xilinx/ml300/serial.c             |    3 +--
 board/xilinx/xilinx_enet/emac_adapter.c |    2 +-
 board/xilinx/xilinx_enet/xemac.h        |    2 +-
 board/xilinx/xilinx_enet/xemac_g.c      |    2 +-
 board/xilinx/xilinx_iic/iic_adapter.c   |    2 +-
 7 files changed, 7 insertions(+), 8 deletions(-)

diff --git a/board/xilinx/ml300/Makefile b/board/xilinx/ml300/Makefile
index 02c22fb..05ad235 100644
--- a/board/xilinx/ml300/Makefile
+++ b/board/xilinx/ml300/Makefile
@@ -28,7 +28,7 @@ ifneq ($(OBJTREE),$(SRCTREE))
 $(shell mkdir -p $(obj)../xilinx_iic)
 endif
 
-INCS		:= -I../ml300 -I../common -I../xilinx_enet -I../xilinx_iic
+INCS		:= -I../common -I../xilinx_enet -I../xilinx_iic
 CFLAGS		+= $(INCS)
 HOST_CFLAGS	+= $(INCS)
 
diff --git a/board/xilinx/ml300/ml300.c b/board/xilinx/ml300/ml300.c
index dad562f..60f0bc2 100644
--- a/board/xilinx/ml300/ml300.c
+++ b/board/xilinx/ml300/ml300.c
@@ -38,9 +38,9 @@
  *
  */
 
+#include <config.h>
 #include <common.h>
 #include <asm/processor.h>
-#include "xparameters.h"
 
 #ifdef CFG_ENV_IS_IN_EEPROM
 extern void convert_env(void);
diff --git a/board/xilinx/ml300/serial.c b/board/xilinx/ml300/serial.c
index c204b88..9b03f89 100644
--- a/board/xilinx/ml300/serial.c
+++ b/board/xilinx/ml300/serial.c
@@ -40,8 +40,7 @@ #include <asm/u-boot.h>
 #include <asm/processor.h>
 #include <common.h>
 #include <command.h>
-#include <configs/ml300.h>
-#include "xparameters.h"
+#include <config.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
diff --git a/board/xilinx/xilinx_enet/emac_adapter.c b/board/xilinx/xilinx_enet/emac_adapter.c
index b30e897..f159cb6 100644
--- a/board/xilinx/xilinx_enet/emac_adapter.c
+++ b/board/xilinx/xilinx_enet/emac_adapter.c
@@ -37,9 +37,9 @@
 *
 ******************************************************************************/
 
+#include <config.h>
 #include <common.h>
 #include <net.h>
-#include "xparameters.h"
 #include "xemac.h"
 
 #if defined(XPAR_EMAC_0_DEVICE_ID)
diff --git a/board/xilinx/xilinx_enet/xemac.h b/board/xilinx/xilinx_enet/xemac.h
index ed704bf..584cb7a 100644
--- a/board/xilinx/xilinx_enet/xemac.h
+++ b/board/xilinx/xilinx_enet/xemac.h
@@ -257,9 +257,9 @@ #define XEMAC_H			/* by using protection
 
 /***************************** Include Files *********************************/
 
+#include <config.h>
 #include "xbasic_types.h"
 #include "xstatus.h"
-#include "xparameters.h"
 #include "xpacket_fifo_v1_00_b.h"	/* Uses v1.00b of Packet Fifo */
 #include "xdma_channel.h"
 
diff --git a/board/xilinx/xilinx_enet/xemac_g.c b/board/xilinx/xilinx_enet/xemac_g.c
index 9340f91..d985157 100644
--- a/board/xilinx/xilinx_enet/xemac_g.c
+++ b/board/xilinx/xilinx_enet/xemac_g.c
@@ -43,7 +43,7 @@
 *
 *******************************************************************/
 
-#include "xparameters.h"
+#include <config.h>
 #include "xemac.h"
 
 /*
diff --git a/board/xilinx/xilinx_iic/iic_adapter.c b/board/xilinx/xilinx_iic/iic_adapter.c
index 163fe15..37dce03 100644
--- a/board/xilinx/xilinx_iic/iic_adapter.c
+++ b/board/xilinx/xilinx_iic/iic_adapter.c
@@ -37,10 +37,10 @@
 *
 ******************************************************************************/
 
+#include <config.h>
 #include <common.h>
 #include <environment.h>
 #include <net.h>
-#include "xparameters.h"
 
 #ifdef CFG_ENV_IS_IN_EEPROM
 #include <i2c.h>
-- 
1.4.3.rc2.g0503