[U-Boot-Users] [PATCH] Update SystemACE driver for 16bit access

Stefan Roese sr at denx.de
Tue Feb 20 13:33:54 CET 2007


This patch removes some problems when the Xilinx SystemACE driver
is used with 16bit access on an big endian platform (like the
AMCC Katmai).

Signed-off-by: Stefan Roese <sr at denx.de>

---
commit d93e2212f962668b3dce091ff5edc33f2347fe37
tree 19b9b366ae1bdb33437370fa5dd009068c2039ec
parent 874bb7b88fe9b4648e1288a387af2e31014a72f3
author Stefan Roese <sr at denx.de> Tue, 20 Feb 2007 13:17:42 +0100
committer Stefan Roese <sr at denx.de> Tue, 20 Feb 2007 13:17:42 +0100

 drivers/systemace.c |   14 +++++++++++---
 1 files changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/systemace.c b/drivers/systemace.c
index 9502623..3bd2ea9 100644
--- a/drivers/systemace.c
+++ b/drivers/systemace.c
@@ -66,8 +66,8 @@
                              writeb(val>>8, CFG_SYSTEMACE_BASE+off+1);}
 #endif
 #else
-#define ace_readw(off) (readw(CFG_SYSTEMACE_BASE+off))
-#define ace_writew(val, off) (writew(val, CFG_SYSTEMACE_BASE+off))
+#define ace_readw(off) (in16(CFG_SYSTEMACE_BASE+off))
+#define ace_writew(val, off) (out16(CFG_SYSTEMACE_BASE+off,val))
 #endif
 
 /* */
@@ -119,6 +119,14 @@ block_dev_desc_t *systemace_get_dev(int dev)
 		systemace_dev.removable = 1;
 		systemace_dev.block_read = systemace_read;
 
+#if (CFG_SYSTEMACE_WIDTH == 16)
+		/*
+		 * By default the SystemACE comes up in 8-bit mode.
+		 * Ensure that 16-bit mode gets enabled.
+		 */
+		ace_writew(0x0001, 0);
+#endif
+
 		init_part(&systemace_dev);
 
 	}
@@ -197,7 +205,7 @@ static unsigned long systemace_read(int dev, unsigned long start,
 #endif
 		/* Write LBA block address */
 		ace_writew((start >> 0) & 0xffff, 0x10);
-		ace_writew((start >> 16) & 0x00ff, 0x12);
+		ace_writew((start >> 16) & 0x0fff, 0x12);
 
 		/* NOTE: in the Write Sector count below, a count of 0
 		   causes a transfer of 256, so &0xff gives the right




More information about the U-Boot mailing list