[U-Boot-Users] Running U-boot in cache area.

[sathesh babu]

Hi,
    I am tring to run U-boot on MIPS 24KE processor.
      I have done MIPS 24KE cache initilization and configured it for write through  mode in the start.S file.
   
  If I specify SDRAM start address  as uncached area ( start with 0xa0000000), u-boot boots up and able to get the u-boot prompt.
   
  It I try SDRAM start address as cached area ( Start with 0x80000000), the u-boot comes up to relocation function and hangs.
   
  Could you please tell me what could be the problem.
  Did i mss any thing?.
   
  I see the same behaviour with write back mode also.
   
  Should i call any cache invalidation ( doing this as part of cache initilization in the start.S) or flush functions before calling relocation().
   
  I am  enabling primary cache only and no secondary cache.
   
  Thanks in advance.
   
  Regards.
  Sathesh
   

 				
---------------------------------
 Here’s a new way to find what you're looking for - Yahoo! Answers 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070121/244dfa04/attachment.htm