[U-Boot-Users] [PATCH] Add support for the MPC8349E-mITX-GP

Wolfgang Denk wd at denx.de
Fri Jan 26 10:42:16 CET 2007

In message <45B9868B.5000709 at freescale.com> you wrote:
> The ITX and the ITX-GP are basically the same board, except the ITX has 
> a few extra peripherals.  It doesn't make sense to have separate config 
> files.


> As for the ifdefs, there are only three - one that defines the CF card 
> that only the ITX has, one for the flash sizes, and another for the 

Why do you need to define the flash sizes? They should get

> command prompt.  I could technically move these into the Makefile, 
> eliminating any ifdefs from the header file.  Do you want me to do that?

No, please keep the Makefile simple.

Best regards,

Wolfgang Denk

Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Actual war is a very messy business. Very, very messy business.
	-- Kirk, "A Taste of Armageddon", stardate 3193.0

More information about the U-Boot mailing list