[U-Boot-Users] [PATCH] Update SCCR programming in cpu_init_f() to support all 83xx processors
Timur Tabi
timur at freescale.com
Tue Jul 3 20:04:34 CEST 2007
Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
bitfields for all 83xx processors. The code to update some bitfields was
compiled only on some processors. Now, the bitfields are programmed as long
as the corresponding CFG_SCCR option is defined in the board header file.
This means that the board header file should not define any CFG_SCCR macros
for bitfields that don't exist on that processor, otherwise the SCCR will be
programmed incorrectly.
Signed-off-by: Timur Tabi <timur at freescale.com>
---
cpu/mpc83xx/cpu_init.c | 14 ++++++++++++--
include/mpc83xx.h | 2 ++
2 files changed, 14 insertions(+), 2 deletions(-)
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
index 3ac9161..53a5f59 100644
--- a/cpu/mpc83xx/cpu_init.c
+++ b/cpu/mpc83xx/cpu_init.c
@@ -83,20 +83,30 @@ void cpu_init_f (volatile immap_t * im)
im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_TSEC2EP) | (CFG_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT);
#endif
-#ifdef CONFIG_MPC834X
#ifdef CFG_SCCR_TSEC1CM
/* TSEC1 clock mode */
im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1CM) | (CFG_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT);
#endif
+
#ifdef CFG_SCCR_TSEC2CM
/* TSEC2 & I2C1 clock mode */
im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2CM) | (CFG_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT);
#endif
+
+#ifdef CFG_SCCR_TSEC1ON
+ /* TSEC1 clock switch */
+ im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC1ON) | (CFG_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT);
+#endif
+
+#ifdef CFG_SCCR_TSEC2ON
+ /* TSEC2 clock switch */
+ im->clk.sccr = (im->clk.sccr & ~SCCR_TSEC2ON) | (CFG_SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT);
+#endif
+
#ifdef CFG_SCCR_USBMPHCM
/* USB MPH clock mode */
im->clk.sccr = (im->clk.sccr & ~SCCR_USBMPHCM) | (CFG_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT);
#endif
-#endif /* CONFIG_MPC834X */
#ifdef CFG_SCCR_PCICM
/* PCI & DMA clock mode */
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index 336c0ac..9d40eae 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -600,7 +600,9 @@
#define SCCR_TSEC1CM_3 0xC0000000
#define SCCR_TSEC1ON 0x20000000
+#define SCCR_TSEC1ON_SHIFT 29
#define SCCR_TSEC2ON 0x10000000
+#define SCCR_TSEC2ON_SHIFT 28
#endif
--
1.5.0.2.260.g2eb065
More information about the U-Boot
mailing list