[U-Boot-Users] Adds Marvel 8 phy part M88E1149S to drivers/tsec.c
eran liberty
eran.liberty at gmail.com
Wed Jul 4 11:10:33 CEST 2007
On 7/4/07, John Traill <john.traill at freescale.com> wrote:
> eran.liberty at gmail.com wrote:
> > Signed-off-by: Eran Liberty <eran.liberty at gmail.com>
> >
> > Index: drivers/tsec.c
> > ===================================================================
> > --- drivers/tsec.c (.../tags/trunk/20070620_2_merge_to_exsw6000) (revision 69)
> > +++ drivers/tsec.c (.../branches/exsw6000) (revision 69)
> > @@ -900,6 +900,39 @@
> > phy_run_commands(priv, priv->phyinfo->shutdown);
> > }
> >
> > +struct phy_info phy_info_M88E1149S = {
> > + 0x1410ca,
> > + "Marvell 88E1149S",
> > + 4,
> > + (struct phy_cmd[]){ /* config */
> > + /* Reset and configure the PHY */
> > + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
> > + {0x1d, 0x1f, NULL},
> > + {0x1e, 0x200c, NULL},
> > + {0x1d, 0x5, NULL},
> > + {0x1e, 0x0, NULL},
> > + {0x1e, 0x100, NULL},
> I believe the above five writes were only required for an Errata on an 88E1011
> device and are not applicable to new devices.
I do not really understand the values I added. (not a phy expert)
I needed a entry that identify itself as Marvell 88E1149S. so i
copy-paste from the 88E1011 entry.
It works as is!
Tell me what needs to be cut out and I will try it.
> > + {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
> > + {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
> > + {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
> > + {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
> > + {miim_end,}
> > + },
> > + (struct phy_cmd[]){ /* startup */
> > + /* Status is read once to clear old link state */
> > + {MIIM_STATUS, miim_read, NULL},
> > + /* Auto-negotiate */
> > + {MIIM_STATUS, miim_read, &mii_parse_sr},
> > + /* Read the status */
> > + {MIIM_88E1011_PHY_STATUS, miim_read,
> > + &mii_parse_88E1011_psr},
> > + {miim_end,}
> > + },
> > + (struct phy_cmd[]){ /* shutdown */
> > + {miim_end,}
> > + },
> > +};
> > +
> > /* The 5411 id is 0x206070, the 5421 is 0x2060e0 */
> > struct phy_info phy_info_BCM5461S = {
> > 0x02060c1, /* 5461 ID */
> > @@ -1293,6 +1326,7 @@
> > &phy_info_cis8201,
> > &phy_info_BCM5461S,
> > &phy_info_M88E1011S,
> > + &phy_info_M88E1149S,
> > &phy_info_M88E1111S,
> > &phy_info_M88E1145,
> > &phy_info_dm9161,
> >
> >
> > -------------------------------------------------------------------------
> > This SF.net email is sponsored by DB2 Express
> > Download DB2 Express C - the FREE version of DB2 express and take
> > control of your XML. No limits. Just data. Click to get it now.
> > http://sourceforge.net/powerbar/db2/
> > _______________________________________________
> > U-Boot-Users mailing list
> > U-Boot-Users at lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/u-boot-users
>
> --
> John Traill
> Systems Engineer
> Network and Computing Systems Group
>
> Freescale Semiconductor UK LTD
> Colvilles Road
> East Kilbride
> Glasgow G75 0TG, Scotland
>
> Tel: +44 (0) 1355 355494
> Fax: +44 (0) 1355 261790
>
> E-mail: john.traill at freescale.com
>
> Registration Number: SC262720
> VAT Number: GB831329053
>
> [ ] General Business Use
> [ ] Freescale Internal Use Only
> [ ] Freescale Confidential Proprietary
>
More information about the U-Boot
mailing list