[U-Boot-Users] Adds Marvel 8 phy part M88E1149S to drivers/tsec.c

eran liberty eran.liberty at gmail.com
Wed Jul 4 17:29:18 CEST 2007


On 7/4/07, John Traill <john.traill at freescale.com> wrote:
> Eran,
>
> eran liberty wrote:
> > On 7/4/07, John Traill <john.traill at freescale.com> wrote:
> >> eran.liberty at gmail.com wrote:
> >> > Signed-off-by: Eran Liberty <eran.liberty at gmail.com>
> >> >
> >> > Index: drivers/tsec.c
> >> > ===================================================================
> >> > --- drivers/tsec.c
> >> (.../tags/trunk/20070620_2_merge_to_exsw6000)   (revision 69)
> >> > +++ drivers/tsec.c    (.../branches/exsw6000) (revision 69)
> >> > @@ -900,6 +900,39 @@
> >> >               phy_run_commands(priv, priv->phyinfo->shutdown);
> >> >  }
> >> >
> >> > +struct phy_info phy_info_M88E1149S = {
> >> > +     0x1410ca,
> >> > +     "Marvell 88E1149S",
> >> > +     4,
> >> > +     (struct phy_cmd[]){     /* config */
> >> > +                        /* Reset and configure the PHY */
> >> > +                        {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
> >> > +                        {0x1d, 0x1f, NULL},
> >> > +                        {0x1e, 0x200c, NULL},
> >> > +                        {0x1d, 0x5, NULL},
> >> > +                        {0x1e, 0x0, NULL},
> >> > +                        {0x1e, 0x100, NULL},
> >> I believe the above five writes were only required for an Errata on an
> >> 88E1011
> >> device and are not applicable to new devices.
> >
> > I do not really understand the values I added. (not a phy expert)
> > I needed a entry that identify itself as Marvell 88E1149S. so i
> > copy-paste from the 88E1011 entry.
> > It works as is!
> > Tell me what needs to be cut out and I will try it.
> I'm not an expert on phys but I believe the following :-
>
>  >> > +                        {0x1d, 0x1f, NULL},
>  >> > +                        {0x1e, 0x200c, NULL},
>  >> > +                        {0x1d, 0x5, NULL},
>  >> > +                        {0x1e, 0x0, NULL},
>  >> > +                        {0x1e, 0x100, NULL},
>
> Has been cut'n'pasted from the 88E1011 entry but does not apply to other Marvell
> phys. Try removing the above lines and see if it still works.
>

It works :)

Thanks.

Patch follows

Liberty



> >
> >> > +                        {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT,
> >> NULL},
> >> > +                        {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
> >> > +                        {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
> >> > +                        {MIIM_CONTROL, MIIM_CONTROL_INIT,
> >> &mii_cr_init},
> >> > +                        {miim_end,}
> >> > +                        },
> >> > +     (struct phy_cmd[]){     /* startup */
> >> > +                        /* Status is read once to clear old link
> >> state */
> >> > +                        {MIIM_STATUS, miim_read, NULL},
> >> > +                        /* Auto-negotiate */
> >> > +                        {MIIM_STATUS, miim_read, &mii_parse_sr},
> >> > +                        /* Read the status */
> >> > +                        {MIIM_88E1011_PHY_STATUS, miim_read,
> >> > +                         &mii_parse_88E1011_psr},
> >> > +                        {miim_end,}
> >> > +                        },
> >> > +     (struct phy_cmd[]){     /* shutdown */
> >> > +                        {miim_end,}
> >> > +                        },
> >> > +};
> >> > +
> >> >  /* The 5411 id is 0x206070, the 5421 is 0x2060e0 */
> >> >  struct phy_info phy_info_BCM5461S = {
> >> >       0x02060c1,      /* 5461 ID */
> >> > @@ -1293,6 +1326,7 @@
> >> >       &phy_info_cis8201,
> >> >       &phy_info_BCM5461S,
> >> >       &phy_info_M88E1011S,
> >> > +     &phy_info_M88E1149S,
> >> >       &phy_info_M88E1111S,
> >> >       &phy_info_M88E1145,
> >> >       &phy_info_dm9161,
> >> >
> >> >
> >> >
> >> -------------------------------------------------------------------------
> >> > This SF.net email is sponsored by DB2 Express
> >> > Download DB2 Express C - the FREE version of DB2 express and take
> >> > control of your XML. No limits. Just data. Click to get it now.
> >> > http://sourceforge.net/powerbar/db2/
> >> > _______________________________________________
> >> > U-Boot-Users mailing list
> >> > U-Boot-Users at lists.sourceforge.net
> >> > https://lists.sourceforge.net/lists/listinfo/u-boot-users
> >>
> >> --
> >> John Traill
> >> Systems Engineer
> >> Network and Computing Systems Group
> >>
> >> Freescale Semiconductor UK LTD
> >> Colvilles Road
> >> East Kilbride
> >> Glasgow G75 0TG, Scotland
> >>
> >> Tel: +44 (0) 1355 355494
> >> Fax: +44 (0) 1355 261790
> >>
> >> E-mail: john.traill at freescale.com
> >>
> >> Registration Number: SC262720
> >> VAT Number: GB831329053
> >>
> >> [ ] General Business Use
> >> [ ] Freescale Internal Use Only
> >> [ ] Freescale Confidential Proprietary
> >>
>
> --
> John Traill
> Systems Engineer
> Network and Computing Systems Group
>
> Freescale Semiconductor UK LTD
> Colvilles Road
> East Kilbride
> Glasgow G75 0TG, Scotland
>
> Tel: +44 (0) 1355 355494
> Fax: +44 (0) 1355 261790
>
> E-mail: john.traill at freescale.com
>
> Registration Number: SC262720
> VAT Number: GB831329053
>
> [ ] General Business Use
> [ ] Freescale Internal Use Only
> [ ] Freescale Confidential Proprietary
>




More information about the U-Boot mailing list