[U-Boot-Users] [PATCH 25/25] include/configs: Use new CONFIG_CMD_* in various [v-z]* named board config files.
Jon Loeliger
jdl at jdl.com
Thu Jul 5 05:33:46 CEST 2007
Signed-off-by: Jon Loeliger <jdl at freescale.com>
---
include/configs/v37.h | 19 ++++++++------
include/configs/v38b.h | 48 ++++++++++++++++++------------------
include/configs/versatile.h | 18 ++++++++++----
include/configs/virtlab2.h | 38 +++++++++++++----------------
include/configs/voiceblue.h | 47 ++++++++++++++++--------------------
include/configs/walnut.h | 49 ++++++++++++++++++++-----------------
include/configs/wepep250.h | 19 ++++++--------
include/configs/xaeniax.h | 23 ++++++++++-------
include/configs/xm250.h | 19 ++++++++------
include/configs/xsengine.h | 13 +++++++--
include/configs/xupv2p.h | 45 ++++++++++++++++++----------------
include/configs/yosemite.h | 56 +++++++++++++++++++++++--------------------
include/configs/yucca.h | 47 +++++++++++++++++++-----------------
include/configs/zylonite.h | 24 ++++++++++-------
14 files changed, 248 insertions(+), 217 deletions(-)
diff --git a/include/configs/v37.h b/include/configs/v37.h
index a2e99b5..402ed4b 100644
--- a/include/configs/v37.h
+++ b/include/configs/v37.h
@@ -83,9 +83,15 @@
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_DATE )
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_DATE
+
/*
* JFFS2 partitions
@@ -105,15 +111,12 @@
#define MTDPARTS_DEFAULT "mtdparts=v37-1:-(jffs2)"
*/
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -194,7 +197,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index 0b7b19e..3e3d116 100644
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -46,11 +46,6 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
-#endif
-
/*
* Serial console configuration
*/
@@ -89,28 +84,28 @@
#define CONFIG_USB_CLOCK 0x0001BBBB
#define CONFIG_USB_CONFIG 0x00001000
+
/*
- * Supported commands
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_FAT | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_PING | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_IRQ | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_MII | \
- CFG_CMD_SDRAM | \
- CFG_CMD_DATE | \
- CFG_CMD_USB | \
- CFG_CMD_FAT)
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_TIMESTAMP /* Print image info with timestamp */
/*
* Boot low with 16 MB Flash
@@ -254,7 +249,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -270,6 +265,11 @@
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
/*
* Various low-level settings
*/
diff --git a/include/configs/versatile.h b/include/configs/versatile.h
index 16db43b..b908219 100644
--- a/include/configs/versatile.h
+++ b/include/configs/versatile.h
@@ -96,14 +96,22 @@
#define CFG_SERIAL0 0x101F1000
#define CFG_SERIAL1 0x101F2000
-#define CONFIG_COMMANDS (CFG_CMD_DHCP | CFG_CMD_IMI | CFG_CMD_NET | CFG_CMD_PING | CFG_CMD_BDI | CFG_CMD_MEMORY | CFG_CMD_FLASH | CFG_CMD_ENV)
-/*#define CONFIG_COMMANDS (CFG_CMD_IMI | CFG_CMD_BDI | CFG_CMD_MEMORY) */
+/*
+ * Command line configuration.
+ */
-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_ENV
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
#define CONFIG_BOOTDELAY 2
#define CONFIG_BOOTARGS "root=/dev/nfs mem=128M ip=dhcp netdev=25,0,0xf1010000,0xf1010010,eth0"
diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h
index 06d8536..ac87b39 100644
--- a/include/configs/virtlab2.h
+++ b/include/configs/virtlab2.h
@@ -96,27 +96,23 @@
#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
-#ifdef CONFIG_SPLASH_SCREEN
-# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_BMP | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
-#else
-# define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_IDE | \
- CFG_CMD_NFS | \
- CFG_CMD_SNTP )
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
+#if defined(CONFIG_SPLASH_SCREEN)
+ #define CONFIG_CMD_BMP
#endif
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
@@ -131,7 +127,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -214,7 +210,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
#endif
diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h
index 4e97b01..f8879a1 100644
--- a/include/configs/voiceblue.h
+++ b/include/configs/voiceblue.h
@@ -131,32 +131,29 @@
#define CONFIG_BAUDRATE 115200
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-#ifdef VOICEBLUE_SMALL_FLASH
-#define CONFIG_COMMANDS (CFG_CMD_BDI | \
- CFG_CMD_LOADB | \
- CFG_CMD_IMI | \
- CFG_CMD_FLASH | \
- CFG_CMD_MEMORY | \
- CFG_CMD_NET | \
- CFG_CMD_BOOTD | \
- CFG_CMD_DHCP | \
- CFG_CMD_PING | \
- CFG_CMD_RUN)
-#else
-#define CONFIG_COMMANDS (CFG_CMD_BDI | \
- CFG_CMD_LOADB | \
- CFG_CMD_IMI | \
- CFG_CMD_FLASH | \
- CFG_CMD_MEMORY | \
- CFG_CMD_NET | \
- CFG_CMD_ENV | \
- CFG_CMD_BOOTD | \
- CFG_CMD_DHCP | \
- CFG_CMD_PING | \
- CFG_CMD_RUN | \
- CFG_CMD_JFFS2)
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_RUN
+
+#if !defined(VOICEBLUE_SMALL_FLASH)
+ #define CONFIG_CMD_ENV
+ #define CONFIG_CMD_JFFS2
#endif
+
#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
#define CONFIG_LOOPW
@@ -220,8 +217,6 @@
#endif /* VOICEBLUE_SMALL_FLASH */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
/*
* Miscellaneous configurable options
diff --git a/include/configs/walnut.h b/include/configs/walnut.h
index b34dc71..2112b53 100644
--- a/include/configs/walnut.h
+++ b/include/configs/walnut.h
@@ -98,26 +98,29 @@
#define CONFIG_RTC_DS174x 1 /* use DS1743 RTC in Walnut */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_EEPROM | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- CFG_CMD_SNTP )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -128,7 +131,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -283,7 +286,7 @@
#define CFG_DCACHE_SIZE 16384 /* For AMCC 405 CPUs, older 405 ppc's */
/* have only 8kB, 16kB is save here */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -340,7 +343,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/wepep250.h b/include/configs/wepep250.h
index 47251bb..3b36040 100644
--- a/include/configs/wepep250.h
+++ b/include/configs/wepep250.h
@@ -36,18 +36,15 @@
/*
- * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if
- * neccessary in include/cmd_confdefs.h file. (Un)comment for getting
- * functionality or size of u-boot code.
+ * Command line configuration.
*/
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- & ~CFG_CMD_NET \
- & ~CFG_CMD_LOADS \
- & ~CFG_CMD_CONSOLE \
- & ~CFG_CMD_AUTOSCRIPT \
-/* | CFG_CMD_JFFS2 */ \
- )
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_CONSOLE
+#undef CONFIG_CMD_AUTOSCRIPT
+
/*
* Boot options. Setting delay to -1 stops autostart count down.
diff --git a/include/configs/xaeniax.h b/include/configs/xaeniax.h
index 1039762..1149542 100644
--- a/include/configs/xaeniax.h
+++ b/include/configs/xaeniax.h
@@ -64,15 +64,20 @@
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /* valid baudrates */
-#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_DTT) | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_NFS | \
- CFG_CMD_SDRAM | \
- CFG_CMD_SNTP )
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
+#undef CONFIG_CMD_DTT
+
#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
#define CONFIG_NETMASK 255.255.255.0
@@ -86,7 +91,7 @@
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
#endif
diff --git a/include/configs/xm250.h b/include/configs/xm250.h
index 825bfd1..225d46a 100644
--- a/include/configs/xm250.h
+++ b/include/configs/xm250.h
@@ -81,14 +81,17 @@
#define CONFIG_BAUDRATE 115200
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ELF | \
- CFG_CMD_EEPROM | \
- CFG_CMD_DATE | \
- CFG_CMD_I2C )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+
#define CONFIG_BOOTDELAY 3
diff --git a/include/configs/xsengine.h b/include/configs/xsengine.h
index dc702cf..37daefe 100644
--- a/include/configs/xsengine.h
+++ b/include/configs/xsengine.h
@@ -102,10 +102,17 @@
/* allow to overwrite serial and ethaddr */
#define CONFIG_BAUDRATE 115200
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_MMC | CFG_CMD_FAT | CFG_CMD_PING | CFG_CMD_JFFS2)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_JFFS2
+
#define CONFIG_BOOTDELAY 3
#define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF
diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
index b4c720d..cfa1281 100644
--- a/include/configs/xupv2p.h
+++ b/include/configs/xupv2p.h
@@ -118,27 +118,30 @@
#define CFG_ENV_IS_NOWHERE 1
#define CFG_ENV_SIZE 0x1000
#define CFG_ENV_ADDR (CFG_MONITOR_BASE - CFG_ENV_SIZE)
-#define CONFIG_COMMANDS (CONFIG__CMD_DFL |\
- CFG_CMD_MEMORY |\
- CFG_CMD_IRQ |\
- CFG_CMD_BDI |\
- CFG_CMD_NET |\
- CFG_CMD_IMI |\
- CFG_CMD_ECHO |\
- CFG_CMD_CACHE |\
- CFG_CMD_RUN |\
- CFG_CMD_AUTOSCRIPT |\
- CFG_CMD_ASKENV |\
- CFG_CMD_LOADS |\
- CFG_CMD_LOADB |\
- CFG_CMD_MISC |\
- CFG_CMD_FAT |\
- CFG_CMD_EXT2 |\
- CFG_CMD_PING \
- )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_PING
+
/* Miscellaneous configurable options */
#define CFG_PROMPT "U-Boot-mONStR> "
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index 3b106ef..853e4bc 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -239,11 +239,7 @@
/* Comment this out to enable USB 1.1 device */
#define USB_2_0_DEVICE
-#define CMD_USB (CFG_CMD_USB | CFG_CMD_FAT | CFG_CMD_EXT2)
-
#define CONFIG_SUPPORT_VFAT
-#else
-#define CMD_USB 0 /* no USB on 440GR */
#endif /* CONFIG_440EP */
#ifdef DEBUG
@@ -252,32 +248,40 @@
#define CONFIG_HW_WATCHDOG /* watchdog */
#endif
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_ELF | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- CMD_USB)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+
+#ifdef CONFIG_440EP
+ #define CONFIG_CMD_USB
+ #define CONFIG_CMD_FAT
+ #define CONFIG_CMD_EXT2
+#endif
+
/*
* Miscellaneous configurable options
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -344,7 +348,7 @@
*/
#define CFG_DCACHE_SIZE (32<<10) /* For AMCC 440 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -356,7 +360,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index 1fdcc4b..ab323aa 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -136,7 +136,7 @@
/* Don't probe these addrs */
#define CFG_I2C_NOPROBES {0x50, 0x52, 0x53, 0x54}
-/* #if (CONFIG_COMMANDS & CFG_CMD_EEPROM) */
+/* #if defined(CONFIG_CMD_EEPROM) */
/* #define CFG_I2C_EEPROM_ADDR 0x50 */ /* I2C boot EEPROM */
#define CFG_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
/* #endif */
@@ -191,24 +191,27 @@
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_EEPROM | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_ELF | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+
#define CONFIG_IBM_EMAC4_V4 1
#define CONFIG_MII 1 /* MII PHY management */
@@ -232,7 +235,7 @@
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -313,7 +316,7 @@
*/
#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -325,7 +328,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h
index 1e8ed7a..3e636a2 100644
--- a/include/configs/zylonite.h
+++ b/include/configs/zylonite.h
@@ -76,19 +76,23 @@
#define CONFIG_BAUDRATE 115200
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
#ifdef TURN_ON_ETHERNET
-# define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING)
+ #define CONFIG_CMD_PING
#else
-# define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
- | CFG_CMD_ENV \
- | CFG_CMD_NAND) \
- & ~(CFG_CMD_NET \
- | CFG_CMD_FLASH \
- | CFG_CMD_IMLS))
+ #define CONFIG_CMD_ENV
+ #define CONFIG_CMD_NAND
+
+ #undef CONFIG_CMD_NET
+ #undef CONFIG_CMD_FLASH
+ #undef CONFIG_CMD_IMLS
#endif
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
#define CONFIG_BOOTDELAY -1
#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
@@ -100,7 +104,7 @@
#define CONFIG_CMDLINE_TAG
#define CONFIG_TIMESTAMP
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
--
1.5.2.2.249.g45fd
More information about the U-Boot
mailing list