[U-Boot-Users] [PATCH 12/25] include/configs: Use new CONFIG_CMD_* in various e* named board config files.
Jon Loeliger
jdl at jdl.com
Thu Jul 5 05:32:10 CEST 2007
Signed-off-by: Jon Loeliger <jdl at freescale.com>
---
include/configs/eXalion.h | 23 ++++++++-------
include/configs/ebony.h | 49 +++++++++++++++++---------------
include/configs/ep7312.h | 12 +++++--
include/configs/ep8248.h | 34 ++++++++++++----------
include/configs/ep8260.h | 69 ++++++++++++++++++++++-----------------------
include/configs/ep82xxm.h | 45 +++++++++++++++-------------
include/configs/evb4510.h | 13 ++++++--
7 files changed, 131 insertions(+), 114 deletions(-)
diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h
index a014c7c..ac1ef95 100644
--- a/include/configs/eXalion.h
+++ b/include/configs/eXalion.h
@@ -58,17 +58,18 @@
/*#define CONFIG_DRAM_SPEED 66 */ /* MHz */
-#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
- CFG_CMD_FLASH | \
- CFG_CMD_SDRAM | \
- CFG_CMD_I2C | \
- CFG_CMD_IDE | \
- CFG_CMD_FAT | \
- CFG_CMD_ENV | \
- CFG_CMD_PCI )
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_PCI
/*-----------------------------------------------------------------------
@@ -398,7 +399,7 @@
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/ebony.h b/include/configs/ebony.h
index 4a1385c..d86a9ef 100644
--- a/include/configs/ebony.h
+++ b/include/configs/ebony.h
@@ -208,26 +208,29 @@
#define CONFIG_NETCONSOLE /* include NetConsole support */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
- CFG_CMD_DIAG | \
- CFG_CMD_ELF | \
- CFG_CMD_EEPROM | \
- CFG_CMD_I2C | \
- CFG_CMD_IRQ | \
- CFG_CMD_MII | \
- CFG_CMD_NET | \
- CFG_CMD_NFS | \
- CFG_CMD_PCI | \
- CFG_CMD_PING | \
- CFG_CMD_REGINFO | \
- CFG_CMD_SDRAM | \
- CFG_CMD_SNTP )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
#undef CONFIG_WATCHDOG /* watchdog disabled */
@@ -236,7 +239,7 @@
*/
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -286,7 +289,7 @@
*/
#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
#define CFG_CACHELINE_SIZE 32 /* ... */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
@@ -298,7 +301,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/ep7312.h b/include/configs/ep7312.h
index bdda629..12be151 100644
--- a/include/configs/ep7312.h
+++ b/include/configs/ep7312.h
@@ -64,10 +64,14 @@
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_JFFS2)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_JFFS2
+
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTARGS "devfs=mount root=ramfs console=ttyS0,9600"
@@ -78,7 +82,7 @@
/*#define CONFIG_BOOTFILE "impa7" */
#define CONFIG_BOOTCOMMAND "bootp;bootm"
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h
index 04147a5..44c4388 100644
--- a/include/configs/ep8248.h
+++ b/include/configs/ep8248.h
@@ -123,23 +123,25 @@
#define CONFIG_BAUDRATE 38400
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_DHCP \
- | CFG_CMD_ECHO \
- | CFG_CMD_I2C \
- | CFG_CMD_IMMAP \
- | CFG_CMD_MII \
- | CFG_CMD_PING \
- )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_BOOTCOMMAND "bootm FF860000" /* autoboot command */
#define CONFIG_BOOTARGS "root=/dev/mtdblock1 rw mtdparts=phys:7M(root),-(root)ro"
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
@@ -157,7 +159,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -183,7 +185,7 @@
#define CFG_DIRECT_FLASH_TFTP
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+#if defined(CONFIG_CMD_JFFS2)
#define CFG_JFFS2_FIRST_BANK 0
#define CFG_JFFS2_NUM_BANKS CFG_MAX_FLASH_BANKS
#define CFG_JFFS2_FIRST_SECTOR 0
@@ -192,7 +194,7 @@
#define CFG_JFFS_CUSTOM_PART
#endif /* CFG_CMD_JFFS2 */
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
#define CONFIG_HARD_I2C 1 /* To enable I2C support */
#define CFG_I2C_SPEED 100000 /* I2C speed */
#define CFG_I2C_SLAVE 0x7F /* I2C slave address */
@@ -240,7 +242,7 @@
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index 6862519..065f967 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -291,37 +291,39 @@
#define CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
-/* What U-Boot subsytems do you want enabled? */
+
/*
-*/
-#define CONFIG_COMMANDS ( CFG_CMD_ALL & \
- ~( CFG_CMD_BMP | \
- CFG_CMD_BSP | \
- CFG_CMD_DCR | \
- CFG_CMD_DHCP | \
- CFG_CMD_DISPLAY | \
- CFG_CMD_DOC | \
- CFG_CMD_DTT | \
- CFG_CMD_EEPROM | \
- CFG_CMD_EXT2 | \
- CFG_CMD_FDC | \
- CFG_CMD_FDOS | \
- CFG_CMD_HWFLOW | \
- CFG_CMD_IDE | \
- CFG_CMD_JFFS2 | \
- CFG_CMD_KGDB | \
- CFG_CMD_MII | \
- CFG_CMD_MMC | \
- CFG_CMD_NAND | \
- CFG_CMD_PCI | \
- CFG_CMD_PCMCIA | \
- CFG_CMD_REISER | \
- CFG_CMD_SCSI | \
- CFG_CMD_SPI | \
- CFG_CMD_UNIVERSE| \
- CFG_CMD_USB | \
- CFG_CMD_VFD | \
- CFG_CMD_XIMG ) )
+ * Command line configuration.
+ */
+#include <config_cmd_all.h>
+
+#undef CONFIG_CMD_BMP
+#undef CONFIG_CMD_BSP
+#undef CONFIG_CMD_DCR
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_DISPLAY
+#undef CONFIG_CMD_DOC
+#undef CONFIG_CMD_DTT
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_EXT2
+#undef CONFIG_CMD_FDC
+#undef CONFIG_CMD_FDOS
+#undef CONFIG_CMD_HWFLOW
+#undef CONFIG_CMD_IDE
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_KGDB
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_MMC
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_PCI
+#undef CONFIG_CMD_PCMCIA
+#undef CONFIG_CMD_REISER
+#undef CONFIG_CMD_SCSI
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_UNIVERSE
+#undef CONFIG_CMD_USB
+#undef CONFIG_CMD_VFD
+#undef CONFIG_CMD_XIMG
/* Where do the internal registers live? */
@@ -342,13 +344,10 @@
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -496,7 +495,7 @@
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h
index a77ccef..5fa7016 100644
--- a/include/configs/ep82xxm.h
+++ b/include/configs/ep82xxm.h
@@ -108,22 +108,25 @@
#define CFG_VXWORKS_MAC_PTR 0x4300 /* Pass Ethernet MAC to VxWorks */
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
- | CFG_CMD_DHCP \
- | CFG_CMD_ECHO \
- | CFG_CMD_I2C \
- | CFG_CMD_IMMAP \
- | CFG_CMD_MII \
- | CFG_CMD_PING \
- | CFG_CMD_DATE \
- | CFG_CMD_DTT \
- | CFG_CMD_EEPROM \
- | CFG_CMD_PCI \
- | CFG_CMD_DIAG \
- )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_DIAG
+
#define CONFIG_ETHADDR 00:10:EC:00:88:65
#define CONFIG_HAS_ETH1
@@ -138,7 +141,7 @@
#define CONFIG_AUTO_COMPLETE 1
#define CONFIG_EXTRA_ENV_SETTINGS "ethprime=FCC3 ETHERNET"
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#undef CONFIG_KGDB_ON_SMC /* define if kgdb on SMC */
#define CONFIG_KGDB_ON_SCC /* define if kgdb on SCC */
#undef CONFIG_KGDB_NONE /* define if kgdb on something else */
@@ -156,7 +159,7 @@
#define CFG_PROMPT_HUSH_PS2 "> "
#define CFG_LONGHELP /* undef to save memory */
#define CFG_PROMPT "ep82xxm=> " /* Monitor Command Prompt */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
@@ -308,7 +311,7 @@
#define CFG_DIRECT_FLASH_TFTP
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+#if defined(CONFIG_CMD_JFFS2)
#define CFG_JFFS2_FIRST_BANK 0
#define CFG_JFFS2_NUM_BANKS CFG_MAX_FLASH_BANKS
#define CFG_JFFS2_FIRST_SECTOR 0
@@ -317,7 +320,7 @@
#define CFG_JFFS_CUSTOM_PART
#endif /* CFG_CMD_JFFS2 */
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
#define CONFIG_HARD_I2C 1 /* To enable I2C support */
#define CFG_I2C_SPEED 100000 /* I2C speed */
#define CFG_I2C_SLAVE 0x7F /* I2C slave address */
@@ -358,7 +361,7 @@
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
diff --git a/include/configs/evb4510.h b/include/configs/evb4510.h
index 88c2c74..42633be 100644
--- a/include/configs/evb4510.h
+++ b/include/configs/evb4510.h
@@ -74,10 +74,15 @@
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING)
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+
+
#define CONFIG_ETHADDR 00:40:95:36:35:33
#define CONFIG_NETMASK 255.255.255.0
@@ -89,7 +94,7 @@
#define CONFIG_BOOTCOMMAND "tftp 100000 uImage"
/* #define CONFIG_BOOTARGS "console=ttyS0,19200 initrd=0x100a0040,530K root=/dev/ram keepinitrd" */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE 19200 /* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
#endif
--
1.5.2.2.249.g45fd
More information about the U-Boot
mailing list