[U-Boot-Users] [PATCH] Bad block skipping for command nboot

[Stefan Roese]

Hi Thomas,

On Tuesday 03 July 2007, Thomas Knobloch wrote:
> The old implementation of command nboot does not support reading the image
> from NAND flash with skipping of bad blocks. The patch implements a new
> version of the nboot command: by calling nboot.jffs2 from the u-boot
> command line the command will load the image from NAND flash with respect
> to bad blocks (by using nand_read_opts()). This is similar to e.g. the NAND
> read command: "nand read.jffs2 ...".

Applied to the u-boot-nand-flash repository.

Thanks.

Best regards,
Stefan

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================