[U-Boot-Users] [PATCH 11/18] include/configs: Use new CONFIG_CMD_* in various P* named board config files.

Jon Loeliger jdl at jdl.com
Mon Jul 9 00:24:19 CEST 2007 

Signed-off-by: Jon Loeliger <jdl at freescale.com>
---
 include/configs/P3G4.h           |   31 ++++++++++--------
 include/configs/PATI.h           |   28 +++++++++++----
 include/configs/PCI405.h         |   29 +++++++++-------
 include/configs/PCI5441.h        |   33 ++++++++++---------
 include/configs/PCIPPC2.h        |   31 +++++++++--------
 include/configs/PCIPPC6.h        |   33 ++++++++++---------
 include/configs/PIP405.h         |   60 +++++++++++++++++-----------------
 include/configs/PK1C20.h         |   46 ++++++++++++++------------
 include/configs/PLU405.h         |   39 ++++++++++++----------
 include/configs/PM520.h          |   66 +++++++++++++++++--------------------
 include/configs/PM826.h          |   46 +++++++++++---------------
 include/configs/PM828.h          |   46 +++++++++++---------------
 include/configs/PMC405.h         |   37 +++++++++++----------
 include/configs/PN62.h           |   27 ++++++++-------
 include/configs/PPChameleonEVB.h |   39 ++++++++++++----------
 15 files changed, 303 insertions(+), 288 deletions(-)

diff --git a/include/configs/P3G4.h b/include/configs/P3G4.h
index a933e1b..bfcfbc1 100644
--- a/include/configs/P3G4.h
+++ b/include/configs/P3G4.h
@@ -125,25 +125,28 @@
 
 #define	CONFIG_TIMESTAMP		/* Print image info with timestamp */
 
-#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
-				CFG_CMD_ASKENV	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_MII	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_UNIVERSE| \
-				CFG_CMD_BSP	)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_UNIVERSE
+#define CONFIG_CMD_BSP
+
 
 /*
  * Miscellaneous configurable options
  */
 #define	CFG_LONGHELP			/* undef to save memory		*/
 #define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -396,7 +399,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	32	/* For all MPC74xx CPUs		 */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
diff --git a/include/configs/PATI.h b/include/configs/PATI.h
index d88fff3..b0f8615 100644
--- a/include/configs/PATI.h
+++ b/include/configs/PATI.h
@@ -39,14 +39,26 @@
 
 #define CONFIG_BAUDRATE		9600
 
-#define CONFIG_COMMANDS		(CFG_CMD_MEMORY | CFG_CMD_LOADB | CFG_CMD_REGINFO | 		\
-				 CFG_CMD_FLASH | CFG_CMD_LOADS | CFG_CMD_ENV |  CFG_CMD_REGINFO	| 		\
-				 CFG_CMD_BDI | CFG_CMD_CONSOLE | CFG_CMD_RUN | CFG_CMD_BSP |	\
-				 CFG_CMD_IMI | CFG_CMD_EEPROM  | CFG_CMD_IRQ | CFG_CMD_MISC \
-)
 
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_CONSOLE
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MISC
+
 
 #if 0
 #define CONFIG_BOOTDELAY	-1		/* autoboot disabled			*/
@@ -71,7 +83,7 @@
 
 #define	CFG_LONGHELP				/* undef to save memory		*/
 #define	CFG_PROMPT		"pati=> "		/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE		1024		/* Console I/O Buffer Size	*/
 #else
 #define	CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
diff --git a/include/configs/PCI405.h b/include/configs/PCI405.h
index 027dd22..2dfd231 100644
--- a/include/configs/PCI405.h
+++ b/include/configs/PCI405.h
@@ -68,17 +68,20 @@
 
 #define CONFIG_RTC_M48T35A	1		/* ST Electronics M48 timekeeper */
 
-#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_BSP	| \
-				CFG_CMD_EEPROM	)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_EEPROM
+
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
@@ -97,7 +100,7 @@
 #define CFG_PROMPT_HUSH_PS2	"> "
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -244,7 +247,7 @@
  */
 #define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
 #define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
diff --git a/include/configs/PCI5441.h b/include/configs/PCI5441.h
index 3a7f7f0..1bfcd37 100644
--- a/include/configs/PCI5441.h
+++ b/include/configs/PCI5441.h
@@ -122,22 +122,23 @@
 #define CFG_NIOS_TMRCNT	(CFG_NIOS_TMRMS * (CONFIG_SYS_CLK_FREQ/1000))
 #define	CFG_HZ		(CONFIG_SYS_CLK_FREQ/(CFG_NIOS_TMRCNT + 1))
 
-/*------------------------------------------------------------------------
- * COMMANDS
- *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS		(CFG_CMD_BDI	| \
-				 CFG_CMD_ECHO	| \
-				 CFG_CMD_ENV	| \
-				 CFG_CMD_FLASH	| \
-				 CFG_CMD_IMI	| \
-				 CFG_CMD_IRQ	| \
-				 CFG_CMD_LOADS	| \
-				 CFG_CMD_LOADB	| \
-				 CFG_CMD_MEMORY	| \
-				 CFG_CMD_MISC	| \
-				 CFG_CMD_RUN	| \
-				 CFG_CMD_SAVES	)
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVES
+
 
 /*------------------------------------------------------------------------
  * MISC
diff --git a/include/configs/PCIPPC2.h b/include/configs/PCIPPC2.h
index 3a97fbc..68b9d75 100644
--- a/include/configs/PCIPPC2.h
+++ b/include/configs/PCIPPC2.h
@@ -59,24 +59,25 @@
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_ASKENV	| \
-				CFG_CMD_BSP	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_DOC	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_SNTP	)
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DOC
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_SNTP
 
 #define CONFIG_PCI		1
 #define CONFIG_PCI_PNP		1	/* PCI plug-and-play */
 
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
- */
-#include <cmd_confdefs.h>
-
 #define CFG_NAND_LEGACY
 
 /*
@@ -223,7 +224,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
diff --git a/include/configs/PCIPPC6.h b/include/configs/PCIPPC6.h
index 130beb7..a8e2715 100644
--- a/include/configs/PCIPPC6.h
+++ b/include/configs/PCIPPC6.h
@@ -59,26 +59,27 @@
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 
-#define CONFIG_COMMANDS        (CONFIG_CMD_DFL	| \
-				CFG_CMD_ASKENV	| \
-				CFG_CMD_BSP	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_DOC	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_SCSI	| \
-				CFG_CMD_SNTP	)
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DOC
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_SCSI
+#define CONFIG_CMD_SNTP
 
 
 #define CONFIG_PCI		1
 #define CONFIG_PCI_PNP		1	/* PCI plug-and-play */
 
-/* This must be included AFTER the definition of CONFIG_COMMANDS (if any)
- */
-#include <cmd_confdefs.h>
-
 #define CFG_NAND_LEGACY
 
 /*
@@ -225,7 +226,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index 806e95f..0a2d7d7 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -40,33 +40,33 @@
  ***********************************************************/
 #define CONFIG_SYS_CLK_FREQ	33000000 /* external frequency to pll	*/
 
-/***********************************************************
- * Command definitions
- ***********************************************************/
-#define CONFIG_COMMANDS		\
-		       (CONFIG_CMD_DFL	| \
-			CFG_CMD_IDE	| \
-			CFG_CMD_DHCP	| \
-			CFG_CMD_PCI	| \
-			CFG_CMD_CACHE	| \
-			CFG_CMD_IRQ	| \
-			CFG_CMD_EEPROM	| \
-			CFG_CMD_I2C	| \
-			CFG_CMD_REGINFO | \
-			CFG_CMD_FDC	| \
-			CFG_CMD_SCSI	| \
-			CFG_CMD_FAT 	| \
-			CFG_CMD_DATE	| \
-			CFG_CMD_ELF	| \
-			CFG_CMD_USB	| \
-			CFG_CMD_MII	| \
-			CFG_CMD_SDRAM	| \
-			CFG_CMD_DOC	| \
-			CFG_CMD_PING	| \
-			CFG_CMD_SAVES   | \
-			CFG_CMD_BSP	)
-/* this must be included AFTER the definition of CONFIG_COMMANDS  (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_FDC
+#define CONFIG_CMD_SCSI
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_USB
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_DOC
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_BSP
+
 
 #define CFG_NAND_LEGACY
 
@@ -150,7 +150,7 @@
  **********************************************************/
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -227,7 +227,7 @@
  */
 #define CFG_DCACHE_SIZE		8192	/* For AMCC 405 CPUs			*/
 #define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
@@ -366,7 +366,7 @@
 /************************************************************
  * Debug support
  ************************************************************/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
 #endif
diff --git a/include/configs/PK1C20.h b/include/configs/PK1C20.h
index 83a7ec2..49a285c 100644
--- a/include/configs/PK1C20.h
+++ b/include/configs/PK1C20.h
@@ -160,30 +160,32 @@
 #define CONFIG_IPADDR		192.168.2.21
 #define CONFIG_SERVERIP		192.168.2.16
 
-/*------------------------------------------------------------------------
- * COMMANDS
- *----------------------------------------------------------------------*/
-#define CONFIG_COMMANDS		(CFG_CMD_BDI	| \
-				 CFG_CMD_DHCP	| \
-				 CFG_CMD_ECHO	| \
-				 CFG_CMD_ENV	| \
-				 CFG_CMD_FLASH	| \
-				 CFG_CMD_IMI	| \
-				 CFG_CMD_IRQ	| \
-				 CFG_CMD_LOADS	| \
-				 CFG_CMD_LOADB	| \
-				 CFG_CMD_MEMORY | \
-				 CFG_CMD_MISC	| \
-				 CFG_CMD_NET	| \
-				 CFG_CMD_PING	| \
-				 CFG_CMD_RUN	| \
-				 CFG_CMD_SAVES	)
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVES
+
 
 /*------------------------------------------------------------------------
  * COMPACT FLASH
  *----------------------------------------------------------------------*/
-#if (CONFIG_COMMANDS & CFG_CMD_IDE)
+#if defined(CONFIG_CMD_IDE)
 #define CONFIG_IDE_PREINIT			/* Implement id_preinit	*/
 #define CFG_IDE_MAXBUS		1		/* 1 IDE bus		*/
 #define CFG_IDE_MAXDEVICE	1		/* 1 drive per IDE bus	*/
@@ -201,12 +203,12 @@
 #define CFG_CF_POWER		0x00900890	/* CF Power FET PIO base*/
 #define CFG_CF_ATASEL		0x009008a0	/* CF ATASEL PIO base	*/
 
-#endif /* CONFIG_COMMANDS & CFG_CMD_IDE */
+#endif
 
 /*------------------------------------------------------------------------
  * JFFS2
  *----------------------------------------------------------------------*/
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+#if defined(CONFIG_CMD_JFFS2)
 #define CFG_JFFS_CUSTOM_PART			/* board defined part	*/
 #endif
 
diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index d02c39b..5742db6 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -61,19 +61,25 @@
 
 #define CONFIG_PHY_CLK_FREQ	EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
 
-#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_IDE	| \
-				CFG_CMD_FAT	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_NAND	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_MII	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_EEPROM	)
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_EEPROM
+
 
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
@@ -83,9 +89,6 @@
 #define CONFIG_AUTO_UPDATE      1       /* autoupdate via compactflash  */
 #define CONFIG_AUTO_UPDATE_SHOW 1       /* use board show routine       */
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 #define CONFIG_RTC_MC146818		/* DS1685 is MC146818 compatible*/
@@ -104,7 +107,7 @@
 #define CFG_PROMPT_HUSH_PS2	"> "
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -331,7 +334,7 @@
 #define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
 					/* have only 8kB, 16kB is save here	*/
 #define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
diff --git a/include/configs/PM520.h b/include/configs/PM520.h
index 7d91a01..3cd3511 100644
--- a/include/configs/PM520.h
+++ b/include/configs/PM520.h
@@ -40,11 +40,6 @@
 #define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH  */
 #define BOOTFLAG_WARM		0x02	/* Software reboot	     */
 
-#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
 /*
  * Serial console configuration
  */
@@ -77,12 +72,6 @@
 #define CFG_RX_ETH_BUFFER	8  /* use 8 rx buffer on eepro100  */
 #undef  CONFIG_NS8382X
 
-#define ADD_PCI_CMD 		CFG_CMD_PCI
-
-#else	/* MPC5100 */
-
-#define ADD_PCI_CMD		0  /* no CFG_CMD_PCI */
-
 #endif
 
 /* Partitions */
@@ -91,39 +80,39 @@
 /* USB */
 #if 1
 #define CONFIG_USB_OHCI
-#define ADD_USB_CMD             CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
-#else
-#define ADD_USB_CMD             0
 #endif
 
-#if defined(CONFIG_BOOT_ROM)
-#define ADD_DOC_CMD             0
-#else
-#define ADD_DOC_CMD             CFG_CMD_DOC
+#if !defined(CONFIG_BOOT_ROM)
 /* DoC requires legacy NAND for now */
 #define CFG_NAND_LEGACY
 #endif
 
+
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				ADD_DOC_CMD	| \
-				ADD_PCI_CMD	| \
-				ADD_USB_CMD	| \
-				CFG_CMD_BEDBUG	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_FAT	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_IDE	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_SNTP	)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+#define CONFIG_CMD_USB
+
+#if !defined(CONFIG_BOOT_ROM)
+#define CONFIG_CMD_DOC
+#endif
+
+#if defined(CONFIG_MPC5200)
+#define CONFIG_CMD_PCI
+#endif
+
 
 /*
  * Autobooting
@@ -294,7 +283,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory	    */
 #define CFG_PROMPT		"=> "	/* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE		1024	/* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE		256	/* Console I/O Buffer Size  */
@@ -310,6 +299,11 @@
 
 #define CFG_HZ			1000	/* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE	32	/* For MPC5xxx CPUs */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
+#endif
+
 /*
  * Various low-level settings
  */
diff --git a/include/configs/PM826.h b/include/configs/PM826.h
index 88fdb51..a93400d 100644
--- a/include/configs/PM826.h
+++ b/include/configs/PM826.h
@@ -154,31 +154,25 @@
 
 #define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
 
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DOC
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
 #ifdef CONFIG_PCI
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_BEDBUG	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_DOC	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_SNTP	)
-#else	/* ! PCI */
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_BEDBUG	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_DOC	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_SNTP	)
-#endif	/* CONFIG_PCI */
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_CMD_PCI
+#endif
+
 
 #define CFG_NAND_LEGACY
 
@@ -197,7 +191,7 @@
  */
 #define	CFG_LONGHELP			/* undef to save memory		*/
 #define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define	CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -345,7 +339,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE      32      /* For MPC8260 CPU              */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
diff --git a/include/configs/PM828.h b/include/configs/PM828.h
index 37ee977..5095a05 100644
--- a/include/configs/PM828.h
+++ b/include/configs/PM828.h
@@ -154,31 +154,25 @@
 
 #define CONFIG_BOOTP_MASK	(CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
 
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DOC
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
 #ifdef CONFIG_PCI
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_BEDBUG	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_DOC	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_SNTP	)
-#else	/* ! PCI */
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_BEDBUG	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_DOC	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_SNTP	)
-#endif	/* CONFIG_PCI */
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_CMD_PCI
+#endif
+
 
 /*
  * Disk-On-Chip configuration
@@ -196,7 +190,7 @@
  */
 #define CFG_LONGHELP			/* undef to save memory		*/
 #define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -338,7 +332,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	32	/* For MPC8260 CPU		*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h
index 6e0bd7f..bdbc900 100644
--- a/include/configs/PMC405.h
+++ b/include/configs/PMC405.h
@@ -63,25 +63,28 @@
 
 #define CONFIG_NETCONSOLE		/* include NetConsole support	*/
 
-#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
-				CFG_CMD_BSP	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_JFFS2	| \
-				CFG_CMD_MII	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_PING	| \
-				CFG_CMD_UNIVERSE | \
-				CFG_CMD_EEPROM  )
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_UNIVERSE
+#define CONFIG_CMD_EEPROM
+
 
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 #define CONFIG_RTC_MC146818             /* DS1685 is MC146818 compatible*/
@@ -100,7 +103,7 @@
 #define CFG_PROMPT_HUSH_PS2	"> "
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -263,7 +266,7 @@
 #define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
 					/* have only 8kB, 16kB is save here	*/
 #define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
diff --git a/include/configs/PN62.h b/include/configs/PN62.h
index a717659..8346d8c 100644
--- a/include/configs/PN62.h
+++ b/include/configs/PN62.h
@@ -42,15 +42,20 @@
 #define CONFIG_CONS_INDEX	1
 
 
-#define REMOVE_COMMANDS         ( CFG_CMD_AUTOSCRIPT	| \
- 				  CFG_CMD_LOADS		| \
- 				  CFG_CMD_ENV		| \
- 				  CFG_CMD_FLASH		| \
-				  CFG_CMD_IMLS		)
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_BSP
+
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_ENV
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
 
-#define CONFIG_COMMANDS		( (CONFIG_CMD_DFL & ~REMOVE_COMMANDS) |\
-				  CFG_CMD_PCI |\
-				  CFG_CMD_BSP)
 
 #define CONFIG_BAUDRATE		19200	/* console baudrate		*/
 
@@ -82,10 +87,6 @@
 			"loadp 200000; bootm"
 #endif
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any)	*/
-#include <cmd_confdefs.h>
-
-
 /*
  * Miscellaneous configurable options
  */
@@ -287,7 +288,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE	32	/* For MPC8240 CPU			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value */
 #endif
 
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index 16e2cc6..709ce5f 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -113,26 +113,29 @@
 #endif
 #define CONFIG_PHY_CLK_FREQ	EMAC_STACR_CLK_66MHZ
 
-#define CONFIG_COMMANDS	      ( CONFIG_CMD_DFL	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_ELF	| \
-				CFG_CMD_EEPROM	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_JFFS2	| \
-				CFG_CMD_MII	| \
-				CFG_CMD_NAND	| \
-				CFG_CMD_NFS	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_SNTP	)
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_SNTP
+
 
 #define CONFIG_MAC_PARTITION
 #define CONFIG_DOS_PARTITION
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
 #define CONFIG_RTC_M41T11	1	/* uses a M41T00 RTC		*/
@@ -162,7 +165,7 @@
 #define CFG_PROMPT_HUSH_PS2	"> "
 #endif
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
 #define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
@@ -446,7 +449,7 @@
 #define CFG_DCACHE_SIZE		16384	/* For AMCC 405 CPUs, older 405 ppc's	*/
 					/* have only 8kB, 16kB is save here	*/
 #define CFG_CACHELINE_SIZE	32	/* ...			*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
-- 
1.5.2.2.249.g45fd

More information about the U-Boot mailing list