[U-Boot-Users] [PATCH 07/30] drivers/[a-m]*: Remove obsolete references to CONFIG_COMMANDS
Jon Loeliger
jdl at jdl.com
Tue Jul 10 05:46:42 CEST 2007
Signed-off-by: Jon Loeliger <jdl at freescale.com>
---
drivers/bcm570x.c | 2 +-
drivers/cfb_console.c | 8 ++++----
drivers/cs8900.c | 2 +-
drivers/dc2114x.c | 2 +-
drivers/e1000.c | 2 +-
drivers/eepro100.c | 8 ++++----
drivers/inca-ip_sw.c | 2 +-
drivers/lan91c96.c | 2 +-
drivers/macb.c | 11 +++++------
drivers/mpc8xx_pcmcia.c | 8 ++++----
10 files changed, 23 insertions(+), 24 deletions(-)
diff --git a/drivers/bcm570x.c b/drivers/bcm570x.c
index 5a3ec22..b00bcd7 100644
--- a/drivers/bcm570x.c
+++ b/drivers/bcm570x.c
@@ -6,7 +6,7 @@
#include <common.h>
-#if ((CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)) \
+#if defined(CONFIG_CMD_NET) \
&& (!defined(CONFIG_NET_MULTI)) && defined(CONFIG_BCM570x)
#ifdef CONFIG_BMW
diff --git a/drivers/cfb_console.c b/drivers/cfb_console.c
index d9568b5..617361e 100644
--- a/drivers/cfb_console.c
+++ b/drivers/cfb_console.c
@@ -180,10 +180,10 @@ CONFIG_VIDEO_HW_CURSOR: - Uses the hardware cursor capability of the
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_BMP) || defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
+#if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
#include <watchdog.h>
#include <bmp_layout.h>
-#endif /* (CONFIG_COMMANDS & CFG_CMD_BMP) || CONFIG_SPLASH_SCREEN */
+#endif
/*****************************************************************************/
/* Cursor definition: */
@@ -709,7 +709,7 @@ void video_puts (const char *s)
/*****************************************************************************/
-#if (CONFIG_COMMANDS & CFG_CMD_BMP) || defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
+#if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
#define FILL_8BIT_332RGB(r,g,b) { \
*fb = ((r>>5)<<5) | ((g>>5)<<2) | (b>>6); \
@@ -1004,7 +1004,7 @@ int video_display_bitmap (ulong bmp_image, int x, int y)
return (0);
}
-#endif /* (CONFIG_COMMANDS & CFG_CMD_BMP) || CONFIG_SPLASH_SCREEN */
+#endif
/*****************************************************************************/
diff --git a/drivers/cs8900.c b/drivers/cs8900.c
index b92519a..80c4ba2 100644
--- a/drivers/cs8900.c
+++ b/drivers/cs8900.c
@@ -43,7 +43,7 @@
#ifdef CONFIG_DRIVER_CS8900
-#if (CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)
+#if defined(CONFIG_CMD_NET)
#undef DEBUG
diff --git a/drivers/dc2114x.c b/drivers/dc2114x.c
index 844cc8d..721bbfc 100644
--- a/drivers/dc2114x.c
+++ b/drivers/dc2114x.c
@@ -20,7 +20,7 @@
#include <common.h>
-#if ((CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)) \
+#if defined(CONFIG_CMD_NET) \
&& defined(CONFIG_NET_MULTI) && defined(CONFIG_TULIP)
#include <malloc.h>
diff --git a/drivers/e1000.c b/drivers/e1000.c
index 1ba7660..f0741da 100644
--- a/drivers/e1000.c
+++ b/drivers/e1000.c
@@ -44,7 +44,7 @@ tested on both gig copper and gig fiber boards
#include "e1000.h"
-#if ((CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)) \
+#if defined(CONFIG_CMD_NET) \
&& defined(CONFIG_NET_MULTI) && defined(CONFIG_E1000)
#define TOUT_LOOP 100000
diff --git a/drivers/eepro100.c b/drivers/eepro100.c
index e37f69c..738146e 100644
--- a/drivers/eepro100.c
+++ b/drivers/eepro100.c
@@ -30,7 +30,7 @@
#undef DEBUG
-#if ((CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)) \
+#if defined(CONFIG_CMD_NET) \
&& defined(CONFIG_NET_MULTI) && defined(CONFIG_EEPRO100)
/* Ethernet chip registers.
@@ -272,7 +272,7 @@ static inline void OUTL (struct eth_device *dev, int command, u_long addr)
*(volatile u32 *) ((addr + dev->iobase)) = cpu_to_le32 (command);
}
-#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) || defined(CONFIG_CMD_MII)
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
static inline int INL (struct eth_device *dev, u_long addr)
{
return le32_to_cpu (*(volatile u32 *) (addr + dev->iobase));
@@ -386,7 +386,7 @@ static int eepro100_miiphy_write (char *devname, unsigned char addr,
return 0;
}
-#endif /* defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) */
+#endif
/* Wait for the chip get the command.
*/
@@ -462,7 +462,7 @@ int eepro100_initialize (bd_t * bis)
eth_register (dev);
-#if defined (CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII) || defined(CONFIG_CMD_MII)
+#if defined (CONFIG_MII) || defined(CONFIG_CMD_MII)
/* register mii command access routines */
miiphy_register(dev->name,
eepro100_miiphy_read, eepro100_miiphy_write);
diff --git a/drivers/inca-ip_sw.c b/drivers/inca-ip_sw.c
index 0dff3a9..e4aaed6 100644
--- a/drivers/inca-ip_sw.c
+++ b/drivers/inca-ip_sw.c
@@ -26,7 +26,7 @@
#include <common.h>
-#if ((CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)) \
+#if defined(CONFIG_CMD_NET) \
&& defined(CONFIG_NET_MULTI) && defined(CONFIG_INCA_IP_SWITCH)
#include <malloc.h>
diff --git a/drivers/lan91c96.c b/drivers/lan91c96.c
index 07c374f..ecdcbd9 100644
--- a/drivers/lan91c96.c
+++ b/drivers/lan91c96.c
@@ -65,7 +65,7 @@
#ifdef CONFIG_DRIVER_LAN91C96
-#if (CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)
+#if defined(CONFIG_CMD_NET)
/*------------------------------------------------------------------------
*
diff --git a/drivers/macb.c b/drivers/macb.c
index 251a029..ffb5f74 100644
--- a/drivers/macb.c
+++ b/drivers/macb.c
@@ -18,8 +18,7 @@
#include <common.h>
#if defined(CONFIG_MACB) \
- && ((CONFIG_COMMANDS & (CFG_CMD_NET | CFG_CMD_MII)) \
- || (defined(CONFIG_CMD_NET) || defined(CONFIG_CMD_MII)))
+ && (defined(CONFIG_CMD_NET) || defined(CONFIG_CMD_MII)))
/*
* The u-boot networking stack is a little weird. It seems like the
@@ -165,7 +164,7 @@ static u16 macb_mdio_read(struct macb_device *macb, u8 reg)
return MACB_BFEXT(DATA, frame);
}
-#if (CONFIG_COMMANDS & CFG_CMD_NET) || defined(CONFIG_CMD_NET)
+#if defined(CONFIG_CMD_NET)
static int macb_send(struct eth_device *netdev, volatile void *packet,
int length)
@@ -494,9 +493,9 @@ int macb_eth_initialize(int id, void *regs, unsigned int phy_addr)
return 0;
}
-#endif /* (CONFIG_COMMANDS & CFG_CMD_NET) */
+#endif
-#if (CONFIG_COMMANDS & CFG_CMD_MII) || defined(CONFIG_CMD_MII)
+#if defined(CONFIG_CMD_MII)
int miiphy_read(unsigned char addr, unsigned char reg, unsigned short *value)
{
@@ -572,6 +571,6 @@ int miiphy_write(unsigned char addr, unsigned char reg, unsigned short value)
return 0;
}
-#endif /* (CONFIG_COMMANDS & CFG_CMD_MII) */
+#endif
#endif /* CONFIG_MACB */
diff --git a/drivers/mpc8xx_pcmcia.c b/drivers/mpc8xx_pcmcia.c
index 2358900..04c44a4 100644
--- a/drivers/mpc8xx_pcmcia.c
+++ b/drivers/mpc8xx_pcmcia.c
@@ -6,11 +6,11 @@
#undef CONFIG_PCMCIA
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
+#if defined(CONFIG_CMD_PCMCIA)
#define CONFIG_PCMCIA
#endif
-#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || defined(CONFIG_CMD_IDE)) && defined(CONFIG_IDE_8xx_PCCARD)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
#define CONFIG_PCMCIA
#endif
@@ -23,7 +23,7 @@ extern int check_ide_device (int slot);
extern int pcmcia_hardware_enable (int slot);
extern int pcmcia_voltage_set(int slot, int vcc, int vpp);
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
+#if defined(CONFIG_CMD_PCMCIA)
extern int pcmcia_hardware_disable(int slot);
#endif
@@ -189,7 +189,7 @@ int pcmcia_on (void)
return rc;
}
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
+#if defined(CONFIG_CMD_PCMCIA)
int pcmcia_off (void)
{
int i;
--
1.5.2.2.249.g45fd
More information about the U-Boot
mailing list