[U-Boot-Users] [PATCH 19/30] board/[q-z]*: Remove obsolete references to CONFIG_COMMANDS
Jon Loeliger
jdl at jdl.com
Tue Jul 10 05:52:08 CEST 2007
Signed-off-by: Jon Loeliger <jdl at freescale.com>
---
board/r360mpi/pcmcia.c | 6 +++---
board/sacsng/sacsng.c | 2 +-
board/sbc2410x/sbc2410x.c | 6 +++---
board/sc3/sc3nand.c | 2 +-
board/siemens/common/fpga.c | 4 ++--
board/siemens/pcu_e/pcu_e.c | 2 +-
board/sixnet/sixnet.c | 6 +++---
board/ssv/adnpesc1/adnpesc1.c | 2 +-
board/ssv/common/cmd_sled.c | 2 +-
board/ssv/common/wd_pio.c | 2 +-
board/stxxtc/stxxtc.c | 2 +-
board/svm_sc8xx/svm_sc8xx.c | 2 +-
board/tqm5200/cmd_stk52xx.c | 2 +-
board/tqm5200/cmd_tb5200.c | 2 +-
board/tqm8272/tqm8272.c | 2 +-
board/trab/auto_update.c | 2 +-
board/trab/cmd_trab.c | 6 +++---
board/trab/trab_fkt.c | 12 ++++++------
board/uc100/pcmcia.c | 6 +++---
board/w7o/cmd_vpd.c | 4 ++--
board/xilinx/ml300/serial.c | 2 +-
board/zylonite/nand.c | 2 +-
22 files changed, 39 insertions(+), 39 deletions(-)
diff --git a/board/r360mpi/pcmcia.c b/board/r360mpi/pcmcia.c
index 0b40001..c5e3990 100644
--- a/board/r360mpi/pcmcia.c
+++ b/board/r360mpi/pcmcia.c
@@ -4,11 +4,11 @@
#undef CONFIG_PCMCIA
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
+#if defined(CONFIG_CMD_PCMCIA)
#define CONFIG_PCMCIA
#endif
-#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || defined(CONFIG_CMD_IDE)) && defined(CONFIG_IDE_8xx_PCCARD)
+#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
#define CONFIG_PCMCIA
#endif
@@ -123,7 +123,7 @@ int pcmcia_hardware_enable(int slot)
}
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
+#if defined(CONFIG_CMD_PCMCIA)
int pcmcia_hardware_disable(int slot)
{
volatile immap_t *immap;
diff --git a/board/sacsng/sacsng.c b/board/sacsng/sacsng.c
index cfd18dd..208f21e 100644
--- a/board/sacsng/sacsng.c
+++ b/board/sacsng/sacsng.c
@@ -837,7 +837,7 @@ void show_boot_progress (int status)
/*
* The following are used to control the SPI chip selects for the SPI command.
*/
-#if (CONFIG_COMMANDS & CFG_CMD_SPI) || defined(CONFIG_CMD_SPI)
+#if defined(CONFIG_CMD_SPI)
#define SPI_ADC_CS_MASK 0x00000800
#define SPI_DAC_CS_MASK 0x00001000
diff --git a/board/sbc2410x/sbc2410x.c b/board/sbc2410x/sbc2410x.c
index dbd095e..b4865e1 100644
--- a/board/sbc2410x/sbc2410x.c
+++ b/board/sbc2410x/sbc2410x.c
@@ -31,7 +31,7 @@
#include <common.h>
#include <s3c2410.h>
-#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
#include <linux/mtd/nand.h>
#endif
@@ -136,7 +136,7 @@ int dram_init (void)
return 0;
}
-#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
extern ulong nand_probe(ulong physadr);
static inline void NF_Reset(void)
@@ -180,4 +180,4 @@ void nand_init(void)
#endif
printf ("%4lu MB\n", nand_probe((ulong)nand) >> 20);
}
-#endif /* CONFIG_COMMANDS & CFG_CMD_NAND */
+#endif
diff --git a/board/sc3/sc3nand.c b/board/sc3/sc3nand.c
index 8d1d327..009567b 100644
--- a/board/sc3/sc3nand.c
+++ b/board/sc3/sc3nand.c
@@ -23,7 +23,7 @@
#include <common.h>
-#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
#include <nand.h>
#include <asm/processor.h>
diff --git a/board/siemens/common/fpga.c b/board/siemens/common/fpga.c
index 62846d6..f022ed6 100644
--- a/board/siemens/common/fpga.c
+++ b/board/siemens/common/fpga.c
@@ -219,7 +219,7 @@ static int fpga_load (fpga_t* fpga, ulong addr, int checkall)
return 1;
}
-#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
+#if defined(CONFIG_CMD_BSP)
/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
@@ -299,7 +299,7 @@ U_BOOT_CMD(
"fpga load [name] addr - load FPGA configuration data\n"
);
-#endif /* CONFIG_COMMANDS & CFG_CMD_BSP */
+#endif
/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
diff --git a/board/siemens/pcu_e/pcu_e.c b/board/siemens/pcu_e/pcu_e.c
index 94aba46..6c37445 100644
--- a/board/siemens/pcu_e/pcu_e.c
+++ b/board/siemens/pcu_e/pcu_e.c
@@ -368,7 +368,7 @@ void reset_phy (void)
/*-----------------------------------------------------------------------
* Board Special Commands: access functions for "PUMA" FPGA
*/
-#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
+#if defined(CONFIG_CMD_BSP)
#define PUMA_READ_MODE 0
#define PUMA_LOAD_MODE 1
diff --git a/board/sixnet/sixnet.c b/board/sixnet/sixnet.c
index d6a26f4..41c74f6 100644
--- a/board/sixnet/sixnet.c
+++ b/board/sixnet/sixnet.c
@@ -33,7 +33,7 @@
# include <status_led.h>
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
#include <linux/mtd/nand_legacy.h>
extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
#endif
@@ -75,7 +75,7 @@ int checkboard (void)
/* ------------------------------------------------------------------------- */
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
+#if defined(CONFIG_CMD_PCMCIA)
#error "SXNI855T has no PCMCIA port"
#endif /* CFG_CMD_PCMCIA */
@@ -327,7 +327,7 @@ int misc_init_r (void)
return (0);
}
-#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
void nand_init(void)
{
unsigned long totlen = nand_probe(CFG_DFLASH_BASE);
diff --git a/board/ssv/adnpesc1/adnpesc1.c b/board/ssv/adnpesc1/adnpesc1.c
index b38a470..8edbd70 100644
--- a/board/ssv/adnpesc1/adnpesc1.c
+++ b/board/ssv/adnpesc1/adnpesc1.c
@@ -65,7 +65,7 @@ long int initdram (int board_type)
/*
* The following are used to control the SPI chip selects for the SPI command.
*/
-#if ((CONFIG_COMMANDS & CFG_CMD_SPI) || defined(CONFIG_CMD_SPI)) && CONFIG_NIOS_SPI
+#if defined(CONFIG_CMD_SPI) && CONFIG_NIOS_SPI
#define SPI_RTC_CS_MASK 0x00000001
diff --git a/board/ssv/common/cmd_sled.c b/board/ssv/common/cmd_sled.c
index b853e83..8cdf45a 100644
--- a/board/ssv/common/cmd_sled.c
+++ b/board/ssv/common/cmd_sled.c
@@ -46,7 +46,7 @@ typedef struct {
extern led_dev_t led_dev[];
-#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
+#if defined(CONFIG_CMD_BSP)
int do_sled (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
int led_id = 0;
diff --git a/board/ssv/common/wd_pio.c b/board/ssv/common/wd_pio.c
index 3424b1a..69e9ed7 100644
--- a/board/ssv/common/wd_pio.c
+++ b/board/ssv/common/wd_pio.c
@@ -112,7 +112,7 @@ void hw_watchdog_reset(void)
enable_interrupts ();
}
-#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
+#if defined(CONFIG_CMD_BSP)
int do_wd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
nios_pio_t *ena_piop = (nios_pio_t*)CONFIG_HW_WDENA_BASE;
diff --git a/board/stxxtc/stxxtc.c b/board/stxxtc/stxxtc.c
index 703ac6f..87a2022 100644
--- a/board/stxxtc/stxxtc.c
+++ b/board/stxxtc/stxxtc.c
@@ -574,7 +574,7 @@ int board_early_init_f(void)
return 0;
}
-#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
#include <linux/mtd/nand_legacy.h>
diff --git a/board/svm_sc8xx/svm_sc8xx.c b/board/svm_sc8xx/svm_sc8xx.c
index d35d38a..b900e6b 100644
--- a/board/svm_sc8xx/svm_sc8xx.c
+++ b/board/svm_sc8xx/svm_sc8xx.c
@@ -153,7 +153,7 @@ long int initdram (int board_type)
return (size_b0 );
}
-#if (CONFIG_COMMANDS & CFG_CMD_DOC) || defined(CONFIG_CMD_DOC)
+#if defined(CONFIG_CMD_DOC)
extern void doc_probe (ulong physadr);
void doc_init (void)
{
diff --git a/board/tqm5200/cmd_stk52xx.c b/board/tqm5200/cmd_stk52xx.c
index 320739a..802332f 100644
--- a/board/tqm5200/cmd_stk52xx.c
+++ b/board/tqm5200/cmd_stk52xx.c
@@ -29,7 +29,7 @@
#include <common.h>
#include <command.h>
-#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
+#if defined(CONFIG_CMD_BSP)
#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
#define DEFAULT_VOL 45
diff --git a/board/tqm5200/cmd_tb5200.c b/board/tqm5200/cmd_tb5200.c
index bc6c67c..cd141c1 100644
--- a/board/tqm5200/cmd_tb5200.c
+++ b/board/tqm5200/cmd_tb5200.c
@@ -29,7 +29,7 @@
#include <common.h>
#include <command.h>
-#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
+#if defined(CONFIG_CMD_BSP)
#if defined (CONFIG_TB5200)
#define SM501_PANEL_DISPLAY_CONTROL 0x00080000UL
diff --git a/board/tqm8272/tqm8272.c b/board/tqm8272/tqm8272.c
index b7fea35..653b7a9 100644
--- a/board/tqm8272/tqm8272.c
+++ b/board/tqm8272/tqm8272.c
@@ -1065,7 +1065,7 @@ int update_flash_size (int flash_size)
}
#endif
-#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
#include <nand.h>
#include <linux/mtd/mtd.h>
diff --git a/board/trab/auto_update.c b/board/trab/auto_update.c
index cc0e366..ad88867 100644
--- a/board/trab/auto_update.c
+++ b/board/trab/auto_update.c
@@ -46,7 +46,7 @@
#error "must define CFG_HUSH_PARSER"
#endif
-#if !((CONFIG_COMMANDS & CFG_CMD_FAT) || defined(CONFIG_CMD_FAT))
+#if !defined(CONFIG_CMD_FAT)
#error "must define CFG_CMD_FAT"
#endif
diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c
index 7dd97a1..2db6a34 100644
--- a/board/trab/cmd_trab.c
+++ b/board/trab/cmd_trab.c
@@ -32,7 +32,7 @@
* TRAB board specific commands. Especially commands for burn-in and function
* test.
*/
-#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
+#if defined(CONFIG_CMD_BSP)
/* limits for valid range of VCC5V in mV */
#define VCC5V_MIN 4500
@@ -846,7 +846,7 @@ int do_temp_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int contact_temp;
int delay = 0;
-#if (CONFIG_COMMANDS & CFG_CMD_DATE) || defined(CONFIG_CMD_DATE)
+#if defined(CONFIG_CMD_DATE)
struct rtc_time tm;
#endif
@@ -862,7 +862,7 @@ int do_temp_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
spi_init ();
while (1) {
-#if (CONFIG_COMMANDS & CFG_CMD_DATE) || defined(CONFIG_CMD_DATE)
+#if defined(CONFIG_CMD_DATE)
rtc_get (&tm);
printf ("%4d-%02d-%02d %2d:%02d:%02d - ",
tm.tm_year, tm.tm_mon, tm.tm_mday,
diff --git a/board/trab/trab_fkt.c b/board/trab/trab_fkt.c
index 64e9b9a..56a80ff 100644
--- a/board/trab/trab_fkt.c
+++ b/board/trab/trab_fkt.c
@@ -148,7 +148,7 @@ static int rs485_receive_chars (char *data, int timeout);
static unsigned short updcrc(unsigned short icrc, unsigned char *icp,
unsigned int icnt);
-#if (CONFIG_COMMANDS & CFG_CMD_I2C) || defined(CONFIG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
static int trab_eeprom_read (char **argv);
static int trab_eeprom_write (char **argv);
int i2c_write_multiple (uchar chip, uint addr, int alen, uchar *buffer,
@@ -959,7 +959,7 @@ static int touch_check_pressed (void)
static int touch_write_clibration_values (int calib_point, int x, int y)
{
-#if (CONFIG_COMMANDS & CFG_CMD_I2C) || defined(CONFIG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
int x_verify = 0;
int y_verify = 0;
@@ -1105,7 +1105,7 @@ static int rs485_receive_chars (char *data, int timeout)
int do_serial_number (char **argv)
{
-#if (CONFIG_COMMANDS & CFG_CMD_I2C) || defined(CONFIG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
unsigned int serial_number;
if (strcmp (argv[2], "read") == 0) {
@@ -1139,7 +1139,7 @@ int do_serial_number (char **argv)
int do_crc16 (void)
{
-#if (CONFIG_COMMANDS & CFG_CMD_I2C) || defined(CONFIG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
int crc;
unsigned char buf[EEPROM_MAX_CRC_BUF];
@@ -1260,7 +1260,7 @@ int do_gain (char **argv)
int do_eeprom (char **argv)
{
-#if (CONFIG_COMMANDS & CFG_CMD_I2C) || defined(CONFIG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
if (strcmp (argv[2], "read") == 0) {
return (trab_eeprom_read (argv));
}
@@ -1278,7 +1278,7 @@ int do_eeprom (char **argv)
#endif /* CFG_CMD_I2C */
}
-#if (CONFIG_COMMANDS & CFG_CMD_I2C) || defined(CONFIG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
static int trab_eeprom_read (char **argv)
{
int i;
diff --git a/board/uc100/pcmcia.c b/board/uc100/pcmcia.c
index 2d1746f..74d29b9 100644
--- a/board/uc100/pcmcia.c
+++ b/board/uc100/pcmcia.c
@@ -4,11 +4,11 @@
#undef CONFIG_PCMCIA
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
+#if defined(CONFIG_CMD_PCMCIA)
#define CONFIG_PCMCIA
#endif
-#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || defined(CONFIG_CMD_IDE)) && defined(CONFIG_IDE_8xx_PCCARD)
+#if (defined(CONFIG_CMD_IDE)) && defined(CONFIG_IDE_8xx_PCCARD)
#define CONFIG_PCMCIA
#endif
@@ -123,7 +123,7 @@ int pcmcia_hardware_enable(int slot)
}
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA) || defined(CONFIG_CMD_PCMCIA)
+#if defined(CONFIG_CMD_PCMCIA)
int pcmcia_hardware_disable(int slot)
{
volatile immap_t *immap;
diff --git a/board/w7o/cmd_vpd.c b/board/w7o/cmd_vpd.c
index 58c4a0b..fdd6ceb 100644
--- a/board/w7o/cmd_vpd.c
+++ b/board/w7o/cmd_vpd.c
@@ -24,7 +24,7 @@
#include <common.h>
#include <command.h>
-#if (CONFIG_COMMANDS & CFG_CMD_BSP) || defined(CONFIG_CMD_BSP)
+#if defined(CONFIG_CMD_BSP)
#include "vpd.h"
@@ -63,4 +63,4 @@ U_BOOT_CMD(
" - Read VPD Data from default address, or device address 'dev_addr'.\n"
);
-#endif /* (CONFIG_COMMANDS & CFG_CMD_BSP) */
+#endif
diff --git a/board/xilinx/ml300/serial.c b/board/xilinx/ml300/serial.c
index e4b743a..09a3dc3 100644
--- a/board/xilinx/ml300/serial.c
+++ b/board/xilinx/ml300/serial.c
@@ -122,7 +122,7 @@ serial_puts(const char *s)
}
}
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB) || defined(CONFIG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
void
kgdb_serial_init(void)
{
diff --git a/board/zylonite/nand.c b/board/zylonite/nand.c
index 3655273..aa3932a 100644
--- a/board/zylonite/nand.c
+++ b/board/zylonite/nand.c
@@ -22,7 +22,7 @@
#include <common.h>
-#if (CONFIG_COMMANDS & CFG_CMD_NAND) || defined(CONFIG_CMD_NAND)
+#if defined(CONFIG_CMD_NAND)
#ifdef CONFIG_NEW_NAND_CODE
#include <nand.h>
--
1.5.2.2.249.g45fd
More information about the U-Boot
mailing list