[U-Boot-Users] [PATCH 5/6] TQM860M: adjust for doubled flash sector size.
Wolfgang Denk
wd at denx.de
Mon Jul 30 17:50:57 CEST 2007
In message <20070724091947.20545.72133.stgit at tq-sewsrv-4.tq-net.de> you wrote:
> Adjust flash map to support the new S29GLxxN (N-Type) Flashes with
> doubled sector size.
>
> Signed-off-by: Martin Krause <martin.krause at tqs.de>
> ---
>
> include/configs/TQM860M.h | 13 +++++++++----
> 1 files changed, 9 insertions(+), 4 deletions(-)
>
> diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h
> index df622d4..7530f62 100644
> --- a/include/configs/TQM860M.h
> +++ b/include/configs/TQM860M.h
> @@ -69,8 +69,13 @@
> "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
> "rootpath=/opt/eldk/ppc_8xx\0" \
> "bootfile=/tftpboot/TQM860M/uImage\0" \
> - "kernel_addr=40080000\0" \
> - "ramdisk_addr=40180000\0" \
> + "kernel_addr=400C0000\0" \
> + "ramdisk_addr=401C0000\0" \
> + "load=tftp 200000 ${u-boot}\0" \
> + "update=protect off 40000000 4003FFFF;" \
> + "erase 40000000 4003FFFF;" \
> + "cp.b 200000 40000000 ${filesize};" \
> + "protect on 40000000 4003FFFF\0" \
See previous comments about using +${filesize} instead of hard coded
end addesses.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Save energy: Drive a smaller shell.
More information about the U-Boot
mailing list