[U-Boot-Users] new cpu directory

[Dylandrea Young]

The board I am working on is manufactured by Freescale. 
   
  Is the boards/freescale directory existing? I couldn't find it from U-boot-1_2_0 downloaded from denx.de. 
   
  Dna

Kim Phillips <kim.phillips at freescale.com> wrote:
  On Wed, 06 Jun 2007 11:36:03 -0500
Jon Loeliger wrote:

> On Wed, 2007-06-06 at 11:22, Timur Tabi wrote:
> > Dylandrea Young wrote:
> > > Hello, all,
> > > 
> > > I am going to port U-boot to a Freescale MPC5121e based board. The 
> > > MPC5121e uses the e300 CPU core based on the PowerPC instruction set. I 
> > > checked u-boot cpu directory and found there are bunch of cpu specific 
> > > subdirectories. Anyone happens to know that one of the subdirectory is 
> > > suit for e300 CPU? If there is no any existing cpu directory for e300 
> > > CPU core, I guess I have to create a new cpu directory and write 
> > > associate cpu specific files.
> > 
> > cpu/mpc83xx is for the 83xx SOCs, all of which have an e300 core.
> 
> And new board ports should be placed under
> 
> boards/freescale
> 
> now too!
> 
Does this apply only to boards manufactured by Freescale, or all
Freescale part based boards (the poster didn't specify which in this
case). I thought it was the former.

Kim


       
---------------------------------
Fussy? Opinionated? Impossible to please? Perfect.  Join Yahoo!'s user panel and lay it on us.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20070606/f6ad60d3/attachment.htm