[U-Boot-Users] Are there any instructions how to compile U-boot for ixp425 target?

[Teemu Keskinarkaus]

> From: Stefan Roese [mailto:sr at denx.de]
> Sent: 7. kesäkuuta 2007 14:44
> To: u-boot-users at lists.sourceforge.net
> > I tried to search for instructions what
> > to do, but I couldn't find any and I vaguely remember someone telling
> > that there isn't at least for ixp. This is first time I'm trying to get
> > the U-boot to work from the scratch so (detailed) instructions would
> > help a lot.
> 
> You have to download the NPE microcode binary (exactly this missing file
> from
> the Intel download site). Here a link for the newest microcode (I have
> *not*
> tested with this microcode version):
> 
> http://downloadcenter.intel.com/detail_desc.aspx?ProductID=2100&DwnldID=12
> 954&agr=Y
> 
> Could be that you have to register to access this file though.
I downloaded the version 2.3 that could be loaded without needing to register and I was able to compile the U-boot, but when I loaded it to unit the unit didn't boot properly anymore. Nothing showed in console. I have to check that the setup is right for console to be able to show anything.

One another thing, since I already have working U-boot. Is it enough if I change the TEXT_BASE from new u-boot and then I'll be able to load the new U-boot to RAM and try to start it from the current U-boot? That way I don't have to program the flash every time. It would also speed up the testing a lot. 

Is there something other than include/configs/ixpd425.h that needs to be modified in order to get U-boot configured properly?

Teemu K.